2009 Lincoln Town Car Owner's Manual - Page 47

How to eject the tape To stop the tape and eject the cassette, press the "EJECT" button. The tape will eject only when in the tape mode. The cassette cannot be ejected when the radio is playing an "AM" or "FM" station. The system will revert to radio mode when the cassette is ejected. Push the k button to activate. When activated, the light above the k button will be illuminated. Tape error messages Your cassette tape player is equipped to diagnose certain problems you may experience. Error codes are as follows: TD E1 - Radio tries to change sides of tape 3 times in a 10 second span. Push "EJECT" and try another tape. If problem persists, refer problem to qualified personnel for service. TD E2 - Tape eject failure. Radio tries to eject tape and it will not eject. Push "EJECT" to eject tape. If the tape will not eject, refer problem to qualified personnel for service. TD E3 - Loading error. Push "EJECT" to eject tape. Reload tape. If the same error code appears in the display, try another tape. How to store the tape Press the "AM", "FM1/FM2", or the "BAND" button located on the Redundant Control switch on your steering wheel (if equipped) while a tape is loaded. Using the Dolby B noise reduction feature NOTE: Noise reduction system manufactured under license from Dolby Labs Licensing Corporation. "Dolby" and double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. 42