2005 Lexus LS 430 Owners Manual - Page 163
2005 Lexus LS 430 Manual
Page 163 highlights
INTERIOR EQUIPMENT 4. Repeat steps 1 through 3 for each remaining HomeLinkR button to program another rolling code system. Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Lexus dealer for assistance. Programming an entrance gate / Programming all devices in the Canadian market 1. Decide which of the 3 HomeLinkR buttons you want to program. 2. Place your hand−held gate/device transmitter 25 to 75 mm (1 to 3 in.) away from the surface of the HomeLinkR. Keep the indicator light on the HomeLink R in view while programming. 3. Press and hold the selected HomeLinkR button. 4. Continuously press and release (cycle) the hand−held gate/device transmitter button every two seconds until step 5 is complete. 5. When the indicator light on the HomeLinkR changes from a slow to a rapid flash after 20 seconds, you can release both buttons. 6. Test the operation of the HomeLinkR by pressing the newly programmed button. Check to see if the gate/device operates correctly. 7. Repeat steps 1 through 6 for each remaining HomeLinkR button to program another device. Reprogramming a button Individual HomeLinkR buttons cannot be erased, however, to reprogram a single button, follow the procedure "Programming the HomeLinkR". (b) Operating the HomeLinkR To operate the HomeLinkR, press the appropriate HomeLinkR button to activate the programmed device. The HomeLinkR indicator light should come on. The HomeLinkR continues to send the signal for up to 20 seconds as long as the button is pressed. 124