2012 Jeep Wrangler Owner Manual - Page 26

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the headlights will turn on, the park lights will flash, the horn will pulse on and off and the interior lights will turn on. Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information. The Panic Alarm will stay on for three minutes unless • For vehicles not equipped with the EVIC, perform the following steps: you turn it off by pressing the PANIC button a second time, or if the vehicle speed is 5 mph (8 km/h) or greater. 1. Press the RKE transmitter UNLOCK button for 4 to NOTE: When you turn off the Panic Alarm by pressing 10 seconds. the PANIC button a second time, you may have to move 2. While the UNLOCK button is pressed, (after four closer to the vehicle due to the radio frequency noises of seconds) press the RKE transmitter LOCK button. Rethe system. lease both buttons. To Turn Off Flash Lights With Lock 3. Test the "Flash Lights With Lock" feature outside of This feature will cause the turn signal lights to flash when the vehicle by pressing the RKE transmitter LOCK button the doors are locked or unlocked with the RKE transmit- with the ignition in the LOCK position and the key ter. This feature can be turned on or turned off. To change removed. the current setting, proceed as follows: NOTE: Pressing the RKE transmitter LOCK button • For vehicles equipped with the EVIC, refer to "Elec- while you are in the vehicle will activate the Vehicle tronic Vehicle Information Center (EVIC)/Personal Security Alarm. Opening a door with the Vehicle Security