2013 Honda Insight Owner's Manual - Page 354

Changing a Flat Tire JACKING POINTS EXTENSION WHEEL NUT WHEEL COVER TOC WHEEL NUT WRENCH EXTENSION 11.Place the jack under the jacking point nearest the tire you need to change. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. Insight and LX models 12.Remove the wheel cover by carefully prying under its edge with the flat tip of the extension. 13.Use the extension and the wheel nut wrench as shown to raise the vehicle until the flat tire is off the ground. 14.Remove the wheel nuts, then remove the flat tire. Handle the wheel nuts carefully; they may be hot from driving. Place the flat tire on the ground with the outside surface facing up. CONTINUED Taking Care of the Unexpected 2013 Insight 351