2004 Honda S2000 Owner's Manual - Page 51

Turn Signal, Headlights Turn Signal and Headlights Turn Signal Push down on the left lever to signal a left turn and up to signal a right turn. To signal a lane change, push lightly on the lever and hold it. The lever will return to center when you release it or complete a turn. Headlights On Rotating the switch on the left lever to the '' '' position turns on the parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights. Turning the switch to the '' '' position turns on the headlights. If you leave the lights on with the key removed from the ignition switch, you will hear a reminder tone when you open the driver's door. High Beams To turn on, push the lever forward until you hear a click. The blue high beam indicator will come on (see page 42 ). Pull it back to return to low beams. To flash the high beams, pull the lever back lightly, then release it. The high beams will stay on as long as you hold the lever back. Daytime Running Lights (Canadian Models) With the headlight switch off, the high beam headlights come on with reduced brightness when you turn the ignition switch to ON (II) and release the parking brake. They remain on until you turn the ignition off, even if you set the parking brake. The headlights revert to normal operation when you turn them on with the switch. 1. Turn Signal 2. Off 3. Parking and interior lights 4. Headlight on 5. High beams 6. Flash high beams 48 Instruments and Controls