2003 Honda CR-V Owner's Manual - Page 89
2003 Honda CR-V Manual
Page 89 highlights
Keys and Locks LOCK (0) You can insert or remove the key only in this position. To switch from ACCESSORY to LOCK, you must push the key in slightly as you turn it. If your vehicle has an automatic transmission, the shift lever must also be in Park. The anti-theft lock will lock the steering column when you remove the key. If the front wheels are turned, the anti-theft lock may sometimes make it difficult to turn the key from LOCK to ACCESSORY. Firmly turn the steering wheel to the left or to the right as you turn the key. START (III) Use this position only to start the engine. The switch returns to ON (II) when you let go of the key. The engine will not start if the Immobilizer System does not recognize the key's coding (see page 85 ). You will hear a reminder beeper if you leave the key in the ignition switch in the LOCK (0) or ACCESSORY (I) position and open the driver's door. Remove the key to turn off the beeper. Removing the key from the ignition switch while driving locks the steering. This can cause you to lose control. Remove the key from the ignition switch only when parked. ACCESSORY (I) In this position, you can operate the audio system and the accessory power sockets. ON (II) This is the normal key position when driving. All features and accessories on the vehicle are usable. Several of the lights on the instrument panel come on as a test when you turn the ignition switch from ACCESSORY to ON. Instruments and Controls 87