1994 Honda Accord Owner's Manual - Page 168
1994 Honda Accord Manual
Page 168 highlights
Lights Replacing a Front Turn Signal Light Bulb TURN SIGNAL ASSEMBLY 5. Push the bulb holder into the turn signal assembly and turn it clockwise until it locks. 6. Test the turn signals to make sure the new bulb is working. 7. Put the turn signal assembly into the bumper. Make sure the tabs on the turn signal assembly fit into the bumper slots. Tighten the mounting screw. BULB BULB HOLDER 1. Use a Phillips-head screwdriver to loosen the turn signal assembly's mounting screw. 2. Remove the turn signal assembly from the bumper. 3. Remove the bulb holder from the turn signal assembly by turning it counterclockwise. 4. Remove the burned out bulb from the socket by pushing it in and turning counterclockwise until it unlocks. Install the new bulb. Maintenance