2008 Ford F450 Diesel Supplement 4th Printing - Page 83

Scheduled Maintenance: F-Super Duty 60,000 miles (96,000 km) ❑ Change engine oil and replace oil filter ❑ Rotate tires, inspect tires for wear and measure tread depth ❑ ❑ ❑ and inspect wheels for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Replace engine- and frame-mounted fuel filters Inspect steering linkage, suspension, driveshaft, ball joints and U-joints Inspect engine and fuel cooling systems and hoses Inspect brake pads/shoes/rotors/drums, brakes lines & hoses, and parking brake system Replace wheel bearing grease and grease seals on 4x2 wheel bearings (if non-sealed bearings) Inspect exhaust system and heat shields Change automatic transmission fluid on all vehicles equipped with the Torqshift transmission. Replace the externally mounted remote filter element for all Torqshift (if equipped). Replace the internal Torqshift transmission fluid filter located inside the transmission bottom pan (vehicles without externally mounted remote filter only). Inspect automatic transmission fluid level on all other vehicles if equipped with dipstick. Consult your dealer for particular requirements. Inspect and lubricate ball joints and tie rod ends (if equipped with zerk fittings) Inspect and lubricate front axle U-joints (4x4 vehicles) Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 70,000 miles (112,000 km) ❑ Change engine oil and replace oil filter ❑ Rotate tires, inspect tires for wear and measure tread depth ❑ ❑ ❑ DEALER VALIDATION: and inspect wheels for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Inspect and lubricate ball joints and tie rod ends (if equipped with zerk fittings) Perform multi-point inspection (recommended) RO#: DATE: P&A CODE: MILEAGE: 83