2007 Ford F250 Diesel Supplement 1st Printing - Page 33

2007 Ford F250 Manual

Page 33 highlights

Maintenance and Specifications DRAINING THE FCM/HFCM AND CHANGING THE FUEL FILTERS Your vehicle is equipped with two fuel filters; one is mounted on top of the engine. On F-Super Duty, the second filter, inside the HFCM, is mounted inside the frame rail under the driver-side floorboard near the transmission. On E-Series vehicles, the second filter, inside the FCM, is mounted on the driver-side of the vehicle next to the transmission case. On all vehicles, both filters should be replaced at the same time. The replacement filters are Motorcraft Part No. (FD-4604, F-Series) and (FD-4606, E-Series). FCM/HFCM drain procedure 1. Stop the vehicle and shut off the engine. The vehicle must be stopped with the engine off when draining the HFCM/FCM. Fuel may ignite if the separator is drained while the engine is running or vehicle is moving. 2. Locate the HFCM and place an appropriate container under the drain port (see illustration). • F-Super Duty • E-Series 33 2007 Econoline (eco) Supplement USA (fus)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

DRAINING THE FCM/HFCM AND CHANGING THE FUEL FILTERS
Your vehicle is equipped with two fuel filters; one is mounted on top of
the engine.
On F-Super Duty,
the second filter, inside the HFCM, is
mounted inside the frame rail under the driver-side floorboard near the
transmission.
On E-Series vehicles,
the second filter, inside the FCM, is
mounted on the driver-side of the vehicle next to the transmission case.
On all vehicles,
both filters should be replaced at the same time. The
replacement filters are Motorcraft Part No. (FD-4604, F-Series) and
(FD-4606, E-Series).
FCM/HFCM drain procedure
1. Stop the vehicle and
shut off
the engine.
The vehicle must be stopped with the engine off when draining
the HFCM/FCM. Fuel may ignite if the separator is drained while
the engine is running or vehicle is moving.
2. Locate the HFCM and place an appropriate container under the drain
port (see illustration).
F-Super Duty
E-Series
2007 Econoline
(eco)
Supplement
USA
(fus)
Maintenance and Specifications
33