2014 Ducati Monster 821 Owners Manual - Page 168
2014 Ducati Monster 821 Manual
Page 168 highlights
Adjuster (2), located on the lever, allows a maximum value (Q) of 0.43 in (11 mm), whereas the (factory) standard setting is 0.2 in (5 mm). If working on such adjuster proves insufficient, work on the secondary adjuster (3). 2 3 Q Attention In case of a slipping clutch due to clutch wear, adjuster (2) on the lever must NEVER be loosened, but screwed, as described above. If the clutch is still slipping, go to a Dealer or a Ducati Authorized Service Center. Fig 86 166
Adjuster (2), located on the lever, allows a maximum
value (Q) of 0.43 in (11 mm), whereas the (factory)
standard setting is 0.2 in (5 mm). If working on such
adjuster proves insufficient, work on the secondary
adjuster (3).
Attention
In case of a slipping clutch due to clutch wear,
adjuster (2) on the lever must NEVER be loosened,
but screwed, as described above.
If the clutch is still slipping, go to a Dealer or a Ducati
Authorized Service Center.
3
2
Q
Fig 86
166