2012 Cadillac Escalade Owner's Manual - Page 444

10-74 Vehicle Care Tire Changing Removing the Spare Tire and Tools The equipment needed to change a flat tire is stored under the storage tray, located on the driver side trim panel, over the rear wheelhouse. A. Jack Knob B. Wing Nut Retaining the Tool Bag 2. Locate the tire sealant and compressor kit. 3. Remove the sealant and compressor kit by pulling the velcro strip up and back. 4. Remove the sealant and compressor kit from its plastic tray assembly. To store the tire sealant and compressor kit, reverse the steps. C. Wing Nut Retaining the Wheel Blocks 2. Turn the wing nut retaining the tool bag (B) counterclockwise to remove it. 3. Turn the jack knob (A) counterclockwise to release the jack and wheel blocks from the bracket. 4. Turn the wing nut retaining the wheel blocks (C) counterclockwise to remove the wheel blocks and the wheel block retainer. Regular Wheelbase Shown, Extended Wheelbase Similar. 1. Remove the tray to access the tools by pulling up on the finger depression under the jack symbol.