2009 Buick Enclave Owner's Manual - Page 9

Seats and Restraint System medium, and low and to turn the cooled seat off. Indicator bars next to the symbol designate the level of cooling selected: three for high, two for medium, and one for low. 1-5 Memory Seat and Mirrors On vehicles with the memory package, the controls are located on the driver door. 1: Saves the seating position for driver 1. 2: Saves the seating position for driver 2. A second seating and mirror position can be programmed by repeating the above steps and pressing button 2. To recall the memory positions, the vehicle must be in P (Park). Press and release either button 1 or 2. The seat, outside mirrors, and power steering column will move to the position previously stored. You will hear a single beep. If the RKE transmitter is used to enter the vehicle and the remote recall memory feature has been turned on, automatic seat and mirror movement will occur. See "MEMORY SEAT RECALL" under DIC Vehicle Customization on page 3-59 for more information. To stop recall movement of the memory feature at any time, press one of the power seat controls, memory buttons, or power mirror buttons. z (Heated Seat and Seatback): To heat the entire seat, press the button with the heated seat and seatback symbol. This symbol will appear on the climate control display to indicate that the feature is on. Press the button to cycle through the temperature settings of high, medium, and low and to turn the heated seat off. Indicator bars next to the symbol designate the level of heat selected: three for high, two for medium, and one for low. The heated and cooled seats will be canceled after the ignition is turned off. To use the heated and cooled seat feature after the vehicle is started, you will need to press the appropriate seat button again. S: Recalls the easy exit position. To save a position in memory: 1. Adjust the driver seat, including the seatback recliner, both outside mirrors, and the power steering column to a comfortable position. See Outside Power Mirrors on page 2-32 for more information. Not all vehicles will have the ability to save and recall the mirror positions. 2. Press and hold button 1 until two beeps sound to let you know that the position has been stored.