Sony KP-65XBR10W Operating Instructions - Page 29

If your projection TV is not connected to a cable system If you perform AUTO SET UP, CABLE is set to ON automatically. After finishing AUTO SET UP, set CABLE to OFF in the CHANNEL SET UP menu, then set AUTO PROGRAM to YES to perform automatic channel presetting. (see "CABLE" and "AUTO PROGRAM" on page 42) To perform AUTO SET UP again • Press SET UP inside the drop-down panel on the projection TV, and perform steps 3-5 on page 24. • Press CHANNEL + or CHANNEL - to select a language. • Press VOLUME - to restore factory settings ("CONTINUE TO AUTO PROGRAM?" will appear on the screen. Press CHANNEL + to execute or CHANNEL - to exit). • Press SET UP to exit. Adjusting the Convergence Automatically (FLASH FOCUS) The projection tube image appears on the screen in three layers (red, green and blue). If they do not converge, the color is poor and the picture blurs. Before you use your projection TV, be sure to adjust the convergence. The FLASH FOCUS feature allows you to adjust the convergence automatically. Tip z It is recommended to perform FLASH FOCUS about 30 minutes after the projection TV is first turned on. POWER TIMER/ STAND BY STEREO FLASH FOCUS SET UP FLASH FOCUS VOLUME CHANNEL ++ - TV/VIDEO - WIDE MODE 123 456 1 Receive a TV or cable TV program. 2 Press FLASH FOCUS for every wide screen mode; NORMAL, WIDE ZOOM, ZOOM and FULL. FLASH FOCUS To select the wide screen mode, press WIDE MODE on the remote control. The cross pattern appears and FLASH FOCUS begins to work. The adjustment is completed when the cross pattern becomes white. To obtain an optimum convergence for Digital TV programs The optimum convergence alignment varies with digital TV formats. Whenever you find that the picture blurs, press FLASH FOCUS. Notes: • You cannot perform any other functions until FLASH FOCUS has completed its cycle. • If you perform any other operation while FLASH FOCUS is in progress, FLASH FOCUS operation is canceled. 25 Basic Set Up