Netgear WNDR3400 WNDR3400 User Manual - Page 98
Setting Up a Repeater Unit, Enable Wireless Repeating Function, Wireless Repeater, Repeater IP Address
UPC - 606449071146
View all Netgear WNDR3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
N600 Wireless Dual Band Router WNDR3400 User Manual Setting Up a Repeater Unit Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless connection to the base station. Note: If you are using the WNDR3400 base station with a non-NETGEAR wireless router as the repeater, you might need to change additional configuration settings. In particular, you should disable the DHCP server function on the wireless repeater AP. To configure a WNDR3400 router as a repeater unit: 1. Log in to the router that will be the repeater. Check the screen, and verify that the match the base unit exactly. The wireless security option must be set to WEP or None. 2. In the Wireless Repeating Function screen (depending on the frequency you want to use), select the Enable Wireless Repeating Function check box and the Wireless Repeater radio button. 3. Fill in the Repeater IP Address field. This IP address must be in the same subnet as the base station, but different from the LAN IP of the base station 4. Click Apply to save your changes. 5. Verify connectivity across the LANs. A computer on any wireless or wired LAN segment of the wireless router should be able to connect to the Internet or share files and printers with any other wireless or wired computer or server connected to the other AP. Customizing Your Network Settings v1.0, August 2010 5-26