Cisco E1200 User Manual - Page 46
Improving Security, How do I know if my network is secure?, Network security following a manual setup - wireless router manual
View all Cisco E1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Linksys E-Series Improving Security How do I know if my network is secure? If you configured your router using Cisco Connect, your network is secure. During setup, Cisco Connect creates a name for your network, enables industrystandard WPA/WPA2 wireless security, and assigns a highly secure password for your wireless network and the administrator's account. To confirm that your network is secure: 1. Run Cisco Connect. 2. In the upper-right corner of the screen, check for the green light that indicates your router is online and secure. If the green light is on, no additional action is required to secure your network. Improving Security Network security following a manual setup If you configured your router manually (not recommended), you must manually configure security. To manually set your router's password: Administration > Management 1. Log into the browser-based utility (see "How to open the browser-based utility" on page 21). 2. Click the Administration tab, then click the Management page. 3. In the Router Access section, enter a secure password for your router, then re-enter the password to confirm it. Your password should be at least eight characters in length. The most secure type of password should include a mix of uppercase and lowercase letters, numbers, and punctuation. 4. Click Save Settings at the bottom of the screen. To manually set your router's network name (SSID): Wireless > Basic Wireless Settings 1. Log into the browser-based utility (see "How to open the browser-based utility" on page 21). 2. Click the Wireless tab, then click the Basic Wireless Settings page. 3. For Configuration View, select Manual. 4. Enter a new network name in the Network Name (SSID) field, then click Save Settings at the bottom of the screen. 36