Zanussi ZGH66424XX User Manual

Zanussi ZGH66424XX Manual

Zanussi ZGH66424XX manual content summary:

  • Zanussi ZGH66424XX | User Manual - Page 1
    User Manual GETTING STARTED? EASY. ZGH66424BB ZGH66424XX EN User Manual Hob GB IE
  • Zanussi ZGH66424XX | User Manual - Page 2
    above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. • Children between 3 and 8 years of age and persons
  • Zanussi ZGH66424XX | User Manual - Page 3
    is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard. • Where not install or use a damaged appliance. • Follow the installation instructions supplied with the appliance. • Keep the minimum distance from other appliances
  • Zanussi ZGH66424XX | User Manual - Page 4
    plug adapters and extension cables. • Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable. • The shock protection of live and insulated parts must be fastened in such a way that
  • Zanussi ZGH66424XX | User Manual - Page 5
    any abrasive products, abrasive cleaning pads, solvents or metal objects. • Do not clean the burners in the dishwasher. SERVICE • To repair the appliance contact an Authorised Service Centre. • Use original spare parts only. DISPOSAL WARNING! Risk of injury or suffocation. • Contact your municipal
  • Zanussi ZGH66424XX | User Manual - Page 6
    not accept liability, should the above instructions or any of the other safety instructions incorporated in this instruction booklet be ignored. On the end pipes (copper with mechanical end). INJECTORS REPLACEMENT 1. Remove the pan supports. 2. Remove the caps and crowns of the burner. 3. With
  • Zanussi ZGH66424XX | User Manual - Page 7
    socket. There is a risk of fire. • Do not let the power cable to heat up to a temperature of more than 90° C. The cable should be guided by means of clamps fixed to the side of the cabinet, in order to avoid any contact with the equipment beneath the cooktop. • Make sure
  • Zanussi ZGH66424XX | User Manual - Page 8
    -approved (BS 1362) fuse. A B REPLACEMENT OF THE CONNECTION CABLE The replacement of electric cable must be carried out exclusively by the service force centre or by personnel with similar competencies, in accordance with the current regulations. To replace the connection cable use only H03V2V2
  • Zanussi ZGH66424XX | User Manual - Page 9
    ASSEMBLY 1. If a furniture unit is installed at a distance of 400 mm above the hob, there must be a minimum safety distance of 50 mm to the left or right from the edge of the hob. 5. 6. 2. 3. 7. min. 600 mm min. 100 mm min. 55 mm min. 650 mm 30 mm 480+02 mm 560+02 mm 8. 4. 400 mm 50 mm
  • Zanussi ZGH66424XX | User Manual - Page 10
    9. A min 30 mm B min 5 mm (max 150 mm) 60 mm CAUTION! Install the appliance only on a worktop with flat surface. POSSIBILITIES FOR INSERTION The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary. Kitchen unit
  • Zanussi ZGH66424XX | User Manual - Page 11
    CONTROL KNOB Symbol Description no gas supply / off position Symbol Description minimum gas supply DAILY USE ignition position / maximum gas supply WARNING! Refer to Safety chapters. BURNER OVERVIEW A B C D A B C D C. Ignition candle D. Thermocouple IGNITION OF THE BURNER Always light
  • Zanussi ZGH66424XX | User Manual - Page 12
    CAUTION! In the absence of electricity you can ignite the burner without electrical device; in this case approach the burner with a flame, turn the control knob counter-clockwise to maximum gas supply position and push it down. Keep the control knob pushed for equal or less than 10 seconds to let
  • Zanussi ZGH66424XX | User Manual - Page 13
    For the burner to operate correctly, make sure that the arms of the pan supports are aligned with the centre of the burner. CLEANING THE HOB • Remove immediately obstructed. PERIODIC MAINTENANCE Speak to your local Authorised Service Centre periodically to check the conditions of the gas supply pipe
  • Zanussi ZGH66424XX | User Manual - Page 14
    TROUBLESHOOTING WARNING! Refer to Safety chapters. WHAT TO DO IF... Problem Possible cause Remedy There is correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of
  • Zanussi ZGH66424XX | User Manual - Page 15
    it on Guarantee Card and send this part (if applicable). B. Stick it on Guarantee Card and keep this part (if applicable). C. Stick it on instruction booklet. TECHNICAL DATA HOB DIMENSIONS Width Depth BYPASS DIAMETERS BURNER Multi Crown Semi-rapid Auxiliary 595 mm 510 mm Ø BYPASS 1/100 mm 57 32
  • Zanussi ZGH66424XX | User Manual - Page 16
    1,0 0,33 50 73 ENERGY EFFICIENCY PRODUCT INFORMATION ACCORDING TO EU 66/2014 Model identification Type of hob Number of gas burners 261 143 71 ZGH66424BB, ZGH66424XX Built-in hob 4 16
  • Zanussi ZGH66424XX | User Manual - Page 17
    ENERGY SAVING • Before use, make sure that the burners and pan supports are assembled correctly. • Use cookware with diameters applicable to the size it is possible, use a pressure cooker. Refer to its user manual. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging
  • Zanussi ZGH66424XX | User Manual - Page 18
    18
  • Zanussi ZGH66424XX | User Manual - Page 19
    19
  • Zanussi ZGH66424XX | User Manual - Page 20
    867345144-D-362018 WWW.ZANUSSI.COM/SHOP
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

GETTING
STARTED?
EASY.
User Manual
ZGH66424BB
ZGH66424XX
EN
User Manual
Hob
GB
IE