Yamaha MY8-mLAN MY8-mLAN Owners Manual

Yamaha MY8-mLAN Manual

Yamaha MY8-mLAN manual content summary:

  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 1
    English Deutsch mLAN Interface Card MY8-mLAN Owner's manual Bedienungsanleitung Mode d'emploi Manual de instrucciones Français Español
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 2
    card. • Do not touch the metallic leads (pins) of the circuit board when handling the card. The pins are sharp and may cause hand cuts. Yamaha cannot be held responsible for data loss or equipment damage caused by inappropriate handling or use. 2
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 3
    to the MY8-mLAN. For details refer to the separate "mLAN Tools Installation Guide." Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. The illustrations shown in this Owner's Manual are for instructional purposes
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 4
    English Table of Contents Introduction 3 Package Contents 3 How to install the MY8-mLAN 5 Names and Functions 6 DIP switch (SW1) settings 7 Connections 10 About mLAN connections 11 Internal Configuration of the MY8-mLAN 12 LED Messages 13 Specifications 14 4
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 5
    must turn off the host device, remove the MY8-mLAN, and then change the settings. 2. Install the MY8-mLAN into your device. For details refer to the operation manual for your device. WARNING You must turn off If you are unable to retrieve a dropped screw, consult your Yamaha dealer for advice.) 5
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 6
    compatible devices via IEEE1394 standard (6-pin) cables. Each jack has an LED in the upper left corner to indicate the following statuses. green : The MY8-mLAN or connected device is a "leaf" node. off : Not connected. red : When there is a possibility that the sound will be interrupted. NOTE If you
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 7
    unit from the others. This will be reflected in the module name (e.g., "MYmLAN31") used when you make mLAN connection settings. When you are using multiple MY8-mLAN units, there will be no problems with operation even if each unit is set to the same number. However if you assign a different number to
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 8
    ON 31 MYmLAN31 By setting these settings appropriately for the device in which the MY8-mLAN is installed, you can construct an uncluttered and stable system. For example on a device such as the Yamaha DA-824 (D/A converter) which provides only the audio INPUT-Plugs described in , enabling the
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 9
    all of them OFF.) s When the MY8-mLAN is installed in the Yamaha AW2816 earlier than version 1.1 (not including 1.1) This version does not support the MY8-mLAN. Please upgrade to version 1.1 or later. s When the MY8-mLAN is installed in the Yamaha AW2816 version 1.1 or later This device transmits
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 10
    (IEEE 1394) device or the host device in which the MY8-mLAN is installed. MY8-mLAN mLAN (IEEE1394) device IEEE1394 standard cable IEEE1394 standard cable Macintosh computer that supports FireWire CAUTION Do not insert or remove the MY8-mLAN while the power of the host device is turned on. 10
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 11
    the MY8-mLAN to another mLAN device is called an "OUTPUTPlug," and each audio or MIDI input received by the MY8-mLAN from another mLAN device is called an "INPUT-Plug." Connections are made by connecting these plugs. NOTE For more information about mLAN connections/plugs, refer to the mLAN Guide
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 12
    Internal Configuration of the MY8-mLAN The signal flow within the MY8-mLAN is shown by the following diagram. mLAN device mLAN MIDI IN mLAN jacks1, 2 mLAN MIDI OUT mLAN audio input mLAN audio output mLAN MIDI/ MIDI conversion MIDI/ mLAN MIDI conversion mLAN audio/Audio direct conversion Audio
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 13
    (system). Green... The connection is a "leaf" node. Red/Orange ... An error has occurred. Green ... The MY8-mLAN is a "root" node. Blue ... The relay function is enabled. Error messages mLAN* 2 1 red red red red green RT Cause orange The topology of the connected devices creates a loop
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 14
    , 48 kHz Jacks Front: mLAN IEEE1394 (1/2), Rear: OPTION I/O slot connector Display mLAN 1/2 LED, ACTIVE LED, RT (Root)/ERR (Error) LED Power consumption 2.2 W (440 mA/+5 V) Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 15
    MEMO 15 English
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 16
    MEMO 16 English
  • Yamaha MY8-mLAN | MY8-mLAN Owners Manual - Page 17
    Recycling-Umweltpapier gedruckt. Ce document a été imprimé sur du papier recyclé non blanchi au chlore. Este documento se ha impreso reciclado en papel sin cloro alguno. YAMAHA CORPORATION Pro Audio & Digital Musical Instrument Division P.O. Box 3, Hamamatsu, 430-8651, Japan © 2001
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

Owner’s manual
mLAN Interface Card
MY8-mLAN
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
English
Deutsch
Français
Español