Yamaha CRW2100SZ Quick Start Guide
Yamaha CRW2100SZ - CRW - CD-RW Drive Manual
 |
View all Yamaha CRW2100SZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha CRW2100SZ manual content summary:
- Yamaha CRW2100SZ | Quick Start Guide - Page 1
QUICK START GUIDE Internal CRW2100EZ & CRW2100SZ Models - Yamaha CRW2100SZ | Quick Start Guide - Page 2
Making Data CDs 8.3) Making a .wav file from a CD 8.4) Making CDs on a Macintosh computer 9. VERIFICATION 38 9.1) Understanding Your New CD-RW drive 9.2) Troubleshooting 10. SPECIFICATIONS 43 11. APPENDIX 45 11.1) Writing Modes 11.2) About the Firmware CRW2100EZ/SZ Version 3 (2/2001) 1 - Yamaha CRW2100SZ | Quick Start Guide - Page 3
. 1.1.1) List of the Products Supported by This Manual This manual provides information relevant to the following Yamaha 3-in-1 CD-RW drives: Model Name Function Feature Summary CRW2100SZ 16X Write, 10X Re-Write, 40X Read Internal SCSI CD ReWritable drive CRW2100EZ 16X Write, 10X Re-Write - Yamaha CRW2100SZ | Quick Start Guide - Page 4
if applicable) 1.2) About your new Yamaha 3-in-1 CD-RW drive 1.2.1) Major Features of the CRW2100 Series 16X Write Speed: Write to a blank recordable CD at up to 16X speed, fully recording a 74 minute CD in under 5 minutes. 10X ReWrite Speed: CRW2100SZ and CRW2100EZ drives feature rewrite speeds of - Yamaha CRW2100SZ | Quick Start Guide - Page 5
on a CD-R media using a CD-ReWritable drive. 1.2.3) CD-ReWritable Drives vs. CD-Recordable Drives All Yamaha CD-RW drives are "multi-function" or "3-in-1" drives. This means that your new drive may be used as a CD-R drive (to write once on CD-R media), a CD-RW drive (to rewrite up to 999 times on - Yamaha CRW2100SZ | Quick Start Guide - Page 6
on the second type of disc. These discs can be read/ played on a device (e.g., CD-ROM drive) that supports "CD-RW." High Speed CD-RW discs These discs allow writing/rewriting at 4X to 10X speeds. The CRW2100 drives can write/rewrite these discs at 4X, 8X, or 10X speed. These discs can be read/played - Yamaha CRW2100SZ | Quick Start Guide - Page 7
data transfer rates with a minimum load increase to the drive's mechanism. Yamaha's new CRW2100 Lightspeed drives use the CAV method in the inner portions of the you register your new Yamaha CD-RW drive. Registration entitles you to receive technical support and customer service, as well as valuable - Yamaha CRW2100SZ | Quick Start Guide - Page 8
3. SCSI MODEL HARDWARE INSTALLATION 3.1) Setup Flowchart for CRW2100SZ (SCSI) IBM Compatible or Macintosh Computers This flowchart shows the procedure for setting up your new Yamaha 3-in-1 SCSI drive. For easy cross-referencing, the relevant pages in this manual are also given. 1STEP Do you have - Yamaha CRW2100SZ | Quick Start Guide - Page 9
use the host adapter only to connect this CD-RW, you may prefer a more economical controller. Yamaha recommends Iwill 2930c / 2930u+ PCI SCSI controllers in the card manufacturer's operating manual. 3.3) CRW2100SZ (SCSI) Drive Settings Before installing your new CD-RW drive in your computer, you will - Yamaha CRW2100SZ | Quick Start Guide - Page 10
CRW2100SZ (SCSI) The CRW2100SZ drive drive. 1 ID SELECT jumper switches Set these switches using black plastic shunts in order to manually assign a SCSI ID number for the drive . 3.3.2) Setting the SCSI ID Number of Your New Yamaha CD-RW Drive The default factory setting for the SCSI ID Number is - Yamaha CRW2100SZ | Quick Start Guide - Page 11
another SCSI device, the Plug and Play component of Windows 95, 98 or ME can automatically assign an unused number to your new CD-RW drive (SCAM protocol level 1- if SCAM is enabled). Please refer to the SCSI Device Connection Diagram (illustration below) for a practical example of how SCSI devices - Yamaha CRW2100SZ | Quick Start Guide - Page 12
ID SELECT PARITY TERMINATOR BLOCK SIZE * Use jumper connectors to short the locations shown in black. Verify your SCSI Card: Before installing your new CD-RW drive, you need to verify that your SCSI card is working properly. To verify that your SCSI card is properly installed, in Windows 95/98/ME - Yamaha CRW2100SZ | Quick Start Guide - Page 13
or Macintosh Computers 4.1) Setup Flowchart for CRW2100EZ (E-IDE) This flowchart shows the procedure for setting up your new Yamaha 3-in-1 E-IDE drive. For easy cross-referencing, the relevant pages in this manual are also given. STEP Set up the CD-RW drive 1 1. Remove the outer casing of - Yamaha CRW2100SZ | Quick Start Guide - Page 14
drive is attached to the secondary connector. Important Note : Avoid connecting your new CD-RW 3-in-1 drive drive) selected as MASTER and all other devices are selected as SLAVE. 4.2.1) Rear panel of CRW2100EZ (E-IDE) The CRW2100EZ drive switch If your computer supports the CSEL function, plug - Yamaha CRW2100SZ | Quick Start Guide - Page 15
should be selected as SLAVES. Note: If adding your new Yamaha CD-RW drive to a system already equipped with a DVD-ROM or high speed CD-ROM drive, you may want to proceed with the following configuration if you encounter problems: Turn off your computer. Remove your DVD-ROM or high speed CD-ROM - Yamaha CRW2100SZ | Quick Start Guide - Page 16
• Phillips screwdriver • Installation CD-ROM disc • A pair of pliers • Yamaha 3-in-1 CD-RW drive • This Quick Start Guide RWERIATDE/ DOINS/C VOL Installing your new Yamaha 3-in-1 CD-RW drive is quite simple. Please follow the instructions on the next page patiently, step-by-step. 1. Before - Yamaha CRW2100SZ | Quick Start Guide - Page 17
access to the inside of the computer (Consult your computer's operating manual for information on removing the cover.) 3. Before touching any of the Select an available drive bay that can hold your new 3-in-1 CD-RW drive. Most computers have a blank cover plate over the empty drive bay. These plates - Yamaha CRW2100SZ | Quick Start Guide - Page 18
new 3-in-1 CD-RW drive from the beginning. Note 2: The drive bays of most computers accommodate any Yamaha CD-RW drive directly. However, some for any type of technical and customer service. 7. Slide your 3-in-1 CD-RW drive into the drive bay. Do not force the CD-RW drive in if you feel it does not - Yamaha CRW2100SZ | Quick Start Guide - Page 19
9. Connect one end of the the supplied audio cable to the audio output (audio out) of your 3-in-1 CD-RW drive. Connect the other end of the audio cable to your soundcard. Do not force in the connector heads. Gently try to insert the connector heads - Yamaha CRW2100SZ | Quick Start Guide - Page 20
audio CD on your CDROM drive. If you are planing to replace your existing CD-ROM drive with your new Yamaha 3-in-1 CD-RW drive, please refer to Note 1 highlighted on page 17. 10. Your new CD-RW drive will be connected to your computer via a ribbon cable. For CRW2100SZ, we have included a 3-connector - Yamaha CRW2100SZ | Quick Start Guide - Page 21
(usually red or pink) line on the SCSI cable. Connect the other end of the ribbon cable to the SCSI controller card. Your new Yamaha CD-RW drive is designed to accept the SCSI ribbon cable only at its correct orientation. Do not force the ribbon in if you feel it does not - Yamaha CRW2100SZ | Quick Start Guide - Page 22
IDE ICNOTNENREFACCTOE R 1 DC +5V INPUT G +12V Top 4-pin power cable Bottom 18. Carefully slide your new 3-in-1 CD-RW drive into the bay. Locate the screw holes on the drive and match them against the screw holes in the chassis. Insert all 4, 3mm mounting screws and washers from the sides and - Yamaha CRW2100SZ | Quick Start Guide - Page 23
to the AC outlet and power it up. Important Note: When you power up the cmputer, make sure the LED on the panel of the CRW2100 dive blinks in green attempting to read disc information. (see page 38) 22 - Yamaha CRW2100SZ | Quick Start Guide - Page 24
RW Drive 1. Reconnect your monitor, mouse, keyboard and AC power cord to your PC. 2. Turn your computer on by flipping the switch to the ON position. Look for the LED light located on the front panel of the CD-RW drive click on "CDROM." If the drive has been icon for the CRW2100 drive, it means - Yamaha CRW2100SZ | Quick Start Guide - Page 25
CRW2100EZ Units: When using Windows 95/98/ME, follow step 4 to open the "Device Manager" window, then double-click the "YAMAHA CRW2100E" icon to open the "YAMAHA CRW2100E transfer between the CRW2100E drive and the computer Yamaha/Adaptec CD-ROM disc in the CD-RW tray and verify that your CD-RW drive - Yamaha CRW2100SZ | Quick Start Guide - Page 26
Direct CD. 6.2) Easy CD Creator To install Easy CD Creator, please follow the instructions below: 1. While running Windows 95/98/ME, Insert the Yamaha/Adaptec CD-ROM into your new CD-RW drive or another connected CD-ROM drive. 2. The disk is designed to auto-run and you only need to follow screen - Yamaha CRW2100SZ | Quick Start Guide - Page 27
Yamaha CD-RW drive. Please study the following illustrations and text carefully. 7.1) Front Panel Disc tray The tray is used to hold the disc. It slides out from the drive unit when a disc needs to be loaded or unloaded. Manual the operation status of the CRW2100 drive. (P.38) 7.2) Loading a - Yamaha CRW2100SZ | Quick Start Guide - Page 28
(CRW2100SZ only). Be sure to remove the disc after it is completely ejected. (Trying to remove the disc before it is completely ejected may cause the drive to malfunction.) • If your new CD-RW drive is not powered on: Pressing the eject button will not eject the disc. However, you may use the Manual - Yamaha CRW2100SZ | Quick Start Guide - Page 29
://www.yamaha.com by clicking on Service & Support. Click on CDR & RW Series of CD & CDRW Recorders, find your model number and click on it. Go to Yamaha Solutions Network (at the bottom of the page) for FAQ and specific solutions to common problems. 3. E-mail our Tech Support at [email protected] - Yamaha CRW2100SZ | Quick Start Guide - Page 30
requirements and may need to be replaced. 8.1.2) Making an Audio CD using Easy CD Creator Please follow the instructions below to create your first Audio CD using your new Yamaha 3-in-1 CD-RW drive and Adaptec's Easy-CD Creator: 1. Click the Start button located in the lower left side of your - Yamaha CRW2100SZ | Quick Start Guide - Page 31
supporting digital audio extraction. To be sure your CD-ROM drive supports DAE, please contact the manufacturer of your CD-ROM drive. For more information, please refer to Easy CD Creator's online manual. 6. Select the drive free capacity of the CD-R or CD-RW disc you are planning to record the songs - Yamaha CRW2100SZ | Quick Start Guide - Page 32
19. A final message box notifies you when recording is complete. Congratulations! You just recorded your first Audio (Music) CD using your new Yamaha 3-in-1 CD-RW drive and Adaptec's Easy CD Creator. 8.1.2) Modifying Your Audio CD Layout Saving a CD Layout: Once a CD layout is created, you can save - Yamaha CRW2100SZ | Quick Start Guide - Page 33
RW disc into your new 3-in-1 CD-RW drive. 2. From the Start menu, slect Adaptec DirectCD and then the DirectCD WIzard and click on DirectCD Wizard. 3. Follow the instructions from your CD-RW drive and continue reading it on another computer using your Yamaha CD-RW or another CD-RW drive. When you - Yamaha CRW2100SZ | Quick Start Guide - Page 34
Data CD using Easy CD Creator Please follow the instructions below to create your first Data CD using Adaptec by inserting the source CD is the CD-ROM drive and placing a CD-R or CD-RW media in the your new CD-RW (destination) drive. 6. Select the drive letter (where your source of data files is - Yamaha CRW2100SZ | Quick Start Guide - Page 35
plug and play device on the MAC. The Yamaha drive needs the extension Toast CD Reader to function as a CD-ROM player. To install Adaptec Toast, please follow the instructions below: 1. Insert the Yamaha/Adaptec CD into the computer and double click on the Yamaha/Adaptec Toast icon that mounts on the - Yamaha CRW2100SZ | Quick Start Guide - Page 36
8.4.1) Making Data CD's from your HD (Hard Drive) with Toast 1. Find and launch the application Toast window. Toast should automatically select the appropriate format. For more information on supported formats, refer to the Toast pdf manual that installed on your HD in the Toast folder. 4. If you - Yamaha CRW2100SZ | Quick Start Guide - Page 37
Selecting Simulation mode will allow you to test the function of your computer system. It actually verifies the data transfer rates and functionality of the Yamaha drive. It does not actually write to the CD. It is only a practice run. 11. Create Disc Image First is also an option. This should only - Yamaha CRW2100SZ | Quick Start Guide - Page 38
the application. 7. Place an Audio CD in either the Apple CD player or the Yamaha drive. 8. The audio tracks should appear under the Title/Time window. 9. If the tracks do not show up, then go to the Drive menu at the top of the screen and select the appropriate CD-ROM. - Yamaha CRW2100SZ | Quick Start Guide - Page 39
will not see a CD icon on screen. Blank discs will not show up on the desktop regardless of when the Yamaha drive was turned on. 9) VERIFICATION 9.1) Understanding Your New CD-RW Drive The following chart is the key to help you understand the front panel indicators: Status Ready (with disc) Ready - Yamaha CRW2100SZ | Quick Start Guide - Page 40
troubleshoot your new drive before calling for customer service. (Also see section 7.4 on page 28.) You may also refer to the Yamaha web site at http://www.yamaha is installed correctly. Please read the instructions that come with your SCSI card for details. The drive is not recognized. G Are the - Yamaha CRW2100SZ | Quick Start Guide - Page 41
instructions that came with your SCSI card for details. G To write to CD-R/RW discs, your CD writing software must support the drive manual that came with the application. The drive does not operate correctly. G Is the disc compatible with the drive drive can become unpredictable. The drive drive but - Yamaha CRW2100SZ | Quick Start Guide - Page 42
SLAVE. If still encountering problems, switch your DVD-ROM jumper setting to SLAVE and set your Yamaha drive setting to MASTER. Do I need a special SCSI-3 cable to connect my new CRW2100SZ to my PC? G No. The Yamaha SCSI-3 drives are SCSI-3 devices which mean that they support the SCSI-3 command set - Yamaha CRW2100SZ | Quick Start Guide - Page 43
current firmware from Yamaha. Install the updates and restart the computer with the Yamaha drive turned OFF until the computer is totally up. My CRW2100EZ/SZ is noisy of my new drive? G Most CD mastering software could measure audio ripping speeds of any CD-RW, CDROM or DVD-ROM drive. However, since - Yamaha CRW2100SZ | Quick Start Guide - Page 44
CRW2100 series CD-RW recorder could achieve the 40x maximum ripping speed via CAV (Constant Angular Velocity - see page 6 of the Quick Start Guide (4x - 10X Full CAV) writing/rewriting: Rewritable discs specified in Orange Book Part III Volume 2 Version 1.0 700MB (79 min.) 650MB (74 min.) 550MB (63 - Yamaha CRW2100SZ | Quick Start Guide - Page 45
B Interface CRW2100EZ: Enhanced IDE(E-IDE)/ATAPI CRW2100SZ: SCSI-3 saving) 5V DC ±5% 12V DC ±10% Operating Environment Dimensions (includes projection) Weight Temperature +5 - +40°C Humidity .1 mm 0.9 kg The CRW2100 series complies with the following Computing Device FCC Part 15, Subpart B - Yamaha CRW2100SZ | Quick Start Guide - Page 46
cannot be used Lead-in Lead-out The lead-in and lead-out areas signify the beginning and end points of a session. They are not part of the data but contain information about the session itself. Basically, a session consists of a lead-in, data, and a lead-out. 11.1.2) Track-at-Once (TAO - Yamaha CRW2100SZ | Quick Start Guide - Page 47
a small piece of software built into the CRW2100SZ and CRW2100EZ drive, and is used to control its basic operation drive on YAMAHA CD-R/RW Drives web site. URL for YAMAHA CD-R/RW Drives web site is http://www.yamaha.com or http://www.yamaha.co.jp/english/product/computer/ The most recent user support - Yamaha CRW2100SZ | Quick Start Guide - Page 48
double-click on CDROM, then doubleclick on the YAMAHA drive. SCSI DRIVES: SCSI ID number When updating the CRW2100SZ drive's firmware, you CRW2100EZ drive in Windows 95/98/ME Go to Control Panel | System | Device Manager tab, double-click on CDOM, the double click on Yamaha CRW2100E. E-IDE DRIVES - Yamaha CRW2100SZ | Quick Start Guide - Page 49
contains no user-serviceable parts. If it appears to be malfunctioning, have it inspected by qualified service personnel. G Do or alternatively, to the nearest Yamaha dealer (listed at the back of this manual). G Make sure the computer the drive should not be exposed to temperatures outside the range 5 ~ 40°C - Yamaha CRW2100SZ | Quick Start Guide - Page 50
. Set the device up according to the instructions in the Owner's Manual. G Always remove the disc from the tray servicing charges, contact the store at which the device was purchased or alternatively, the nearest Yamaha dealer (listed at the back of this manual). The device should be serviced - Yamaha CRW2100SZ | Quick Start Guide - Page 51
manual belong to their respec tive owners. 3. Yamaha does not bear any responsibility for any outcome as a result of using this device. 4. Reproduction of this manual, either in part writing to CD-R/RW, make sure that Yamaha and suppliers accept no liability for the loss of any data or any problems - Yamaha CRW2100SZ | Quick Start Guide - Page 52
instructions found in the users manual the problem by Guide (CRW2100EZ/EDK v.4.0) Ordering number: QSGCRW2100EZ/EDK © 2001 Yamaha Electronics Corp. All Rights Reserved Yamaha Electronics Corp., USA, Multimedia Products Division 6660 Orangethorpe Ave., Buena Park, CA 90620 www.yamaha.com No part - Yamaha CRW2100SZ | Quick Start Guide - Page 53
Yamaha Corporation of America, Consumer Products Division 6600 Orangethorpe Ave., Buena Park, CA 90620 www.yamaha.com 52
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
 |
 |
Q
UICK
S
TART
G
UIDE
Internal CRW2100EZ & CRW2100SZ Models