Yamaha 6260 Owners Manual

Yamaha 6260 - HTR AV Receiver Manual

Get Yamaha 6260 - HTR AV Receiver PDF manuals and user guides
UPC - 027108933115
View all Yamaha 6260 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha 6260 manual content summary:

  • Yamaha 6260 | Owners Manual - Page 1
    U HTR-6260 AV Receiver OWNER'S MANUAL
  • Yamaha 6260 | Owners Manual - Page 2
  • Yamaha 6260 | Owners Manual - Page 3
    of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha and "ON", please try to eliminate the problem by using one of the following measures:
  • Yamaha 6260 | Owners Manual - Page 4
    unit. Contact qualified Yamaha service personnel when any service is needed. The Troubleshooting" section on common operating errors before concluding that this unit is faulty. 18 Before moving this unit, press AMAIN ZONE à la norme NMB-003 du Canada. IMPORTANT Please record the serial number
  • Yamaha 6260 | Owners Manual - Page 5
    56 Using multi-zone configuration 57 Connecting Zone2 57 Controlling Zone2 58 Controlling other components with the remote control 59 Setting remote control codes 59 Resetting all remote control codes 59 Advanced setup 60 APPENDIX Troubleshooting 61 General 61 HDMI 64 Tuner (FM/AM 64
  • Yamaha 6260 | Owners Manual - Page 6
    [Audio/Video] HDMI x 1 [Video] Component video x 1, composite video x 1 • Audio/Visual output [Audio] Analog x 1 [Video] Composite video x 1 • Audio output Analog x 1 • Zone2 output Analog x 1 Other terminals Remote input x 1, Remote output x 1 Trigger output x 1 ■ Proprietary Yamaha technology
  • Yamaha 6260 | Owners Manual - Page 7
    trademarks of Sirius XM Radio Inc. and its subsidiaries. All rights reserved. Service not available in Alaska and Hawaii. Supplied accessories Check that you received all of the following parts. • Remote control • Batteries (2) (AAA, R03, UM-4) • Optimizer microphone • AM loop antenna • Indoor FM
  • Yamaha 6260 | Owners Manual - Page 8
    For plugging headphones (see page 23). C ZONE2 ON/OFF Switches the zone function on and off (see page 58). D ZONE2 CONTROL Enables operation of a receiver set in Zone2, including input source switching, volume control and tuner operation, with the main amplifier or remote control after this key is
  • Yamaha 6260 | Owners Manual - Page 9
    connecting an optional Yamaha iPod universal dock (YDS11) or Bluetooth wireless audio receiver (YBA-10) (see page 17). c XM terminal For connecting XM Mini-Tuner in XM Mini-Tuner Home Dock (separately sold) (see page 31). d HDMI OUT/HDMI 1-4 terminals For connecting an HDMI-compatible video monitor
  • Yamaha 6260 | Owners Manual - Page 10
    is activated (see page 24). h ZONE2 indicator Lights up when the zone functions are turned on. i VOLUME indicator Displays volume levels. j MUTE indicator Flashes when audio is muted. k Cursor indicators Light up if corresponding cursors on the remote control are available for operations. l Multi
  • Yamaha 6260 | Owners Manual - Page 11
    Remote control a b e h i j k l m o s MAIN ZONE2 TRANSMIT CODE SET POWER SOURCE 1 1 5 SLEEP POWER HDMI 2 3 4 AV 2 3 4 AUDIO 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER SIRIUS CATEGORY FM AM INFO MEMORY XM PRESET MULTI TUN./CH MOVIE ENHANCER SUR. DECODE MUSIC STEREO STRAIGHT
  • Yamaha 6260 | Owners Manual - Page 12
    guide HDMI cable 2 Audio amplifier ☞P. 16 • Connecting a Yamaha iPod universal dock or Bluetooth wireless audio receiver ☞P. 17 • Connecting the FM and AM antennas ☞P. 18 • Connecting an XM Mini-Tuner Home Dock ☞P. 31 • Connecting a SiriusConnect tuner • This unit supports the SCENE function
  • Yamaha 6260 | Owners Manual - Page 13
    batteries if you notice the following conditions: - the operation range of the remote control narrows - the transmit indicator does not flash or is dim • types of batteries (such as alkaline and manganese batteries) together. Specification of batteries may be different even though they look the same.
  • Yamaha 6260 | Owners Manual - Page 14
    Connections Placing speakers This unit supports up to 7.1-channel surround. We recommend the following speaker layout in Dolby Digital and DTS signals. Use a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System. Place it exterior to the front left and
  • Yamaha 6260 | Owners Manual - Page 15
    3 HDMI 4 SPEAKERS EXTRA SP ZONE2/PRESENCE X. FRONT CENTER CENTER SURROUND SURROUND BACK/ BI-AMP CENTER R.BACK SUBWOOFER NPUT AUDIO OUT ZONE2 OUT FRONT SURROUND SUR. BACK PRE OUT 1 SUBWOOFER 2 ■ 6.1-channel (when using the Multi-zone function)
  • Yamaha 6260 | Owners Manual - Page 16
    page 11) or the speakers in the second zone (Zone2) (see page 57) to EXTRA SP terminals . 2 Release the tab to secure the wire. Using bi-amplification connections You can connect speakers that support Refer to the instruction manuals of speakers for
  • Yamaha 6260 | Owners Manual - Page 17
    chrominance blue (PB) and chrominance red (PR) components. Use component video cables. HDMI jacks HDMI HDMI To transmit digital video and digital audio signals. Use HDMI cables. y • We recommend that you use a commercially available 19-pin HDMI cable no longer than 5 meters (16 feet) with the
  • Yamaha 6260 | Owners Manual - Page 18
    1-6 and an audio output terminal. If the TV supports an optical digital output, we recommend that you use the AV input 1. Connecting to the AV input 1 allows you to switch an input source to the AV input 1 with a just a single key operation using the SCENE function (see page 22). HDMI Y PB PR
  • Yamaha 6260 | Owners Manual - Page 19
    VIDEO PR HDMI 2 HDMI 3 REMOTE IN HDMI 4 FM GND AM PB OUT VIDEO Y MONITOR OUT 12V 0.1A MAX. TRIGGER OUT FRONT CENTER HDMI input (HDMI 1-4) OPTICAL ( TV ) AV 1 COAXIAL AV 2 COAXIAL (CD) AV 3 OPTICAL AV 4 AV 5 AV 6 AV OUT AUDIO1 AUDIO2 FRONT SURROUND SUR.BACK SUBWOOFER AUDIO ZO
  • Yamaha 6260 | Owners Manual - Page 20
    audio/video signals of the selected input sources are output from the AV OUT jack and AUDIO OUT jack. An HDMI input signal, COMPONENT VIDEO input signal or digital audio input signal cannot be output. When using the AV DVD player does not support multi-channel digital an external amplifier This unit
  • Yamaha 6260 | Owners Manual - Page 21
    connected both the PORTABLE jack and AUDIO jack, sound input from the PORTABLE jack is output. SIRIUS DOCK XM COMPONENT VIDEO PR PB VIDEO Y HDMI OUT ANTENNA UNBAL. FM GND A Yamaha iPod universal dock/Bluetooth wireless audio receiver ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX
  • Yamaha 6260 | Owners Manual - Page 22
    HDMI OUT HDMI 1 HDMI 2 HDMI 3 H ANTENNA UNBAL. COMPONENT VIDEO REMOTE the nearest authorized Yamaha dealer or service center. • Always ZONE ON/OFF (or gPOWER) to turn on this unit. 2 Press AMAIN ZONE ON/OFF (or gPOWER) again to turn off this unit (standby mode). y • The unit needs a few seconds
  • Yamaha 6260 | Owners Manual - Page 23
    has a Yamaha Parametric Acoustic satisfactory. y • See page 51 for the "Manual Setup" procedure. Using Auto Setup 1 Check Zone2," "Presence" or "None." If this unit does not work when you press oCursor, press mSETUP once and then operate this unit. UT OPTIMIZER MIC h VIDEO AUX VIDEO AUDIO
  • Yamaha 6260 | Owners Manual - Page 24
    l / h. If this unit does not work when you press oCursor, press mSETUP once and a measurement starts in 10 seconds. A loud test tone is output measurement" (page 21). • If problems occur during measurement, "WARNING (XX)" be subjected to high temperatures such on an AV component. y • If you do not
  • Yamaha 6260 | Owners Manual - Page 25
    • See page 70 for details on warning messages. • Optimization will not be performed while a warning message is displayed. We recommend that you solve the problem and perform "Auto Setup" again. 1 Check if "→" is displayed on the left of "WARNING" and press oENTER. Details of the warning message are
  • Yamaha 6260 | Owners Manual - Page 26
    program BD/DVD TV CD RADIO HDMI 1 AV 1 AV 3 TUNER Straight Straight Straight 7ch Enhancer y • When this unit is on standby, you can turn on this unit by pressing the SCENE key. • If a Yamaha DVD player that can receive SCENE control signals is connected to the REMOTE OUT jack of this unit, the
  • Yamaha 6260 | Owners Manual - Page 27
    seconds while pressing down lSCENE key whose assignment you want to change. The external component can now be controlled remotely just by selecting a scene. From now on the external component can be remotely controllable just by selecting a scene. Muting audio menu - multi-zone function Using your
  • Yamaha 6260 | Owners Manual - Page 28
    on the front panel display using oCursor k / n. • If an HDMI related error occurs, error information is displayed at the bottom of the screen Audio Decoder SIRIUS: Channel, Category, Artist / Song, Composer, Antenna, DSP Program, Audio Decoder iPod (Simple remote mode): Input, DSP Program, Audio
  • Yamaha 6260 | Owners Manual - Page 29
    unit is also equipped with a Yamaha digital sound field processing (DSP) ■ Selecting a sound field program with the remote control Perform the following operations depending on the Dolby TrueHD, DTS Express, DTS-HD Master Audio, or DTS-HD High Resolution Audio sources, this unit does not apply any
  • Yamaha 6260 | Owners Manual - Page 30
    the depth and 3D feeling of the field during play, while offering movie-like surround effects in the movie scenes in the game. For audio music sources Program Hall in Munich Hall in Vienna Chamber Cellar Club The Roxy Theatre The Bottom Line Music Video Descriptions This sound field simulates
  • Yamaha 6260 | Owners Manual - Page 31
    model only) Neural Surround processing for any sources. The Neural Surround decoder supports PCM, Dolby Digital, DTS Digital Surround, DSD and analog 2-channel input mode (see page 28) when multi-channel audio signal is input. ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 27 En
  • Yamaha 6260 | Owners Manual - Page 32
    Enjoy the sound field programs Enjoying unprocessed input sources (Straight decoding mode) In straight decoding mode, sounds are reproduced without sound field effect. 2-channel stereo sources are output from only the front left and right speakers. Multi-channel input sources are decoded straight
  • Yamaha 6260 | Owners Manual - Page 33
    a station is detected. This is useful when you want to tune in to a specific station. When you press and release the key The tuner increases or decreases the frequency in steps. Use this method when the tuner cannot receive strong signals and stations are skipped during the search. You can listen to
  • Yamaha 6260 | Owners Manual - Page 34
    station (Frequency tuning)" (see page 29). 2 Press FMEMORY (or iMEMORY). "Manual Preset" appears on the front panel display, followed soon by the preset number to , press oRETURN on the remote control or leave the tuner without any operations for about 30 seconds. Calling a preset station
  • Yamaha 6260 | Owners Manual - Page 35
    connect either a SIRIUS or XM Satellite Radio tuner (sold separately) to your satellite-ready receiver. Satellite Radio is available to residents of begin enjoying the service. Easy to follow installation and setup instructions are provided with the satellite tuners. Whichever service you choose,
  • Yamaha 6260 | Owners Manual - Page 36
    Category name Note • If you don't operate within 10 seconds, the category search mode returns to "ALL (All this unit): - the channel is out of service. - you do not subscribe to the channel. digit channel number, press the tNumeric keys on the remote control and then press tENT to confirm the input
  • Yamaha 6260 | Owners Manual - Page 37
    preset number automatically, press and hold FMEMORY (or iMEMORY) for more than 2 seconds instead of step 2. In this case, the following steps are unnecessary. • of preset XM Satellite Radio channels. 1 Press nOPTION on the remote control. The option menu is displayed on the front panel display.
  • Yamaha 6260 | Owners Manual - Page 38
    category, channel number ■ Video monitor (OSD) Press qDISPLAY on the remote control to turn on or off the information display. The following information number DSP Program Current sound field program (see page 25) Audio Decoder Current Audio Decoder (see page 27) Back to "Channel" Front Panel
  • Yamaha 6260 | Owners Manual - Page 39
    reception differs depending on the area. Refer to the instruction manuals supplied with the SiriusConnect tuner for the installation of the antenna. You can tuner and the antenna. • If "NOT SUPPORTED" appears on the front panel display, this unit does not support the connected SiriusConnect tuner
  • Yamaha 6260 | Owners Manual - Page 40
    name Note • If you don't operate within 10 seconds, the category search mode returns to "ALL (All (see page 38). - the channel is out of service. - you do not subscribe to the channel. ■ digit channel number, press the tNumeric keys on the remote control and then press tENT to confirm the input
  • Yamaha 6260 | Owners Manual - Page 41
    preset number automatically, press and hold FMEMORY (or iMEMORY) for more than 2 seconds instead of step 2. In this case, the following steps are unnecessary. • of preset SIRIUS Satellite Radio channels. 1 Press nOPTION on the remote control. The option menu is displayed on the front panel display.
  • Yamaha 6260 | Owners Manual - Page 42
    locking channels Use this feature to set the Parental Lock code number (PIN) and select the channels to be locked. 1 Press nOPTION on the remote control. The option menu is displayed on the front panel display and video monitor. 2 Press oCursor n repeatedly to select "Parental Lock" and then press
  • Yamaha 6260 | Owners Manual - Page 43
    antenna of the SiriusConnect tuner cannot receive the signals, "ACQUIRING" appears on the front panel display. • When an information is unavailable, "----" appears. ■ Video monitor (OSD) Press qDISPLAY on the remote Audio Decoder Current Audio Decoder (see page
  • Yamaha 6260 | Owners Manual - Page 44
    "Videos" to browse video files. Note • "Videos" will not be displayed when your iPod or Yamaha iPod universal dock do not support the browser function for browsing video files. Controlling iPod in simple remote mode You can perform basic iPod operations (play, stop, skip, etc.) using the supplied
  • Yamaha 6260 | Owners Manual - Page 45
    INTRODUCTION PREPARATION BASIC OPERATION Using iPod™ 4 Press oCursor k / n / l / h to select a menu item and then oENTER to start playback. Menu items of "Music" Playlists, Artists, Albums, Songs, Genres, Composers • Playlists > Songs • Artists > Albums > Songs • Albums > Songs • Songs • Genres
  • Yamaha 6260 | Owners Manual - Page 46
    on the front panel display. y • The Yamaha Bluetooth wireless audio receiver can be paired with up to eight Bluetooth components remote control, the connected Bluetooth wireless audio receiver searches and connects to the last connected Bluetooth component. If the Bluetooth wireless audio receiver
  • Yamaha 6260 | Owners Manual - Page 47
    (or hInput selection keys). 2 Press nOPTION on the remote control. The OPTION menu appears. The displayed OPTION menu . y • When oCursor or other keys do not work after completing the menu, select the input source again using Volume Trim V-AUX Volume Trim TUNER Volume Trim FM Mode Auto Preset
  • Yamaha 6260 | Owners Manual - Page 48
    on audio and input signal per second. Notes • HDMI components connected is over the limit. The connected monitor is not compatible with the video input signal. ■ FM Mode Input source: TUNER Choices: Stereo*/Mono Sets FM broadcasting receiving mode. Stereo Receives in stereo mode. Mono Receives
  • Yamaha 6260 | Owners Manual - Page 49
    source: TUNER, XM, SIRIUS When TUNER is support a multi-channel digital audio output, the video signal can be output to the video monitor while reproducing a multichannel analog audio signal. 1 Press OINPUT l / h (or hMULTI) to change the input source to "MULTI CH." 2 Press nOPTION on the remote
  • Yamaha 6260 | Owners Manual - Page 50
    "On" (see page 56). To change the parameters, set it to "Off." 1 Turn on the video monitor connected to this unit. 2 Press mSETUP on the remote control. The setup menu appears on the monitor. 3 Press oCursor k / n to select "DSP Parameter" and press oENTER. The screen changes as follows. Sound field
  • Yamaha 6260 | Owners Manual - Page 51
    INTRODUCTION PREPARATION BASIC OPERATION Dialog Lift Choices: 0* to 5 Use this feature to adjust the vertical position of the dialogues in movies. The ideal position of the dialogues is at the center of the video monitor screen. The ideal dialogue position If the dialogues are heard at the lower
  • Yamaha 6260 | Owners Manual - Page 52
    Editing surround decoders/sound field programs Source sound Early reflections Level Level Time Sound source Time Rev.Time parameter adjusts the attenuation time of the rear reverberant sound based on the time that about 1kHz reverberant sound takes for 60dB of attenuation. Reverberant sound
  • Yamaha 6260 | Owners Manual - Page 53
    INTRODUCTION PREPARATION BASIC OPERATION Rev.Level parameter adjusts the reverberation sound level. Increasing the value of Rev.Level makes the reverbration sound level higher, which allows you to create more echo. Source sound Level (dB) Rev.Level Time Parameters only usable in certain sound
  • Yamaha 6260 | Owners Manual - Page 54
    You can call the setup menu using the remote control and change the settings of various HDMI Auto Auto Delay Manual Delay Function Setup 1 HDMI Standby Through Audio Output Resolution Aspect 2 Display Dimmer FL Scroll OSD Shift 3 Volume Adaptive DRC Max Volume Init. Volume 4 Input Rename 5 Zone2
  • Yamaha 6260 | Owners Manual - Page 55
    described. 1 Press mSETUP on the remote control. The setup menu screen appears. Function Setup . 1 HDMI 2 Display 3 Volume 4 Input Rename 5 Zone2 [ ]/[ ]:Up/ Zone2/Presence/None* Selects the application for EXTRA SP terminals. Zone2 Assigns the EXTRA SP terminals for the speakers in the second zone
  • Yamaha 6260 | Owners Manual - Page 56
    Operating various settings for this unit (Setup menu) LFE/Bass Out Choices: SWFR/Front/Both* Selects speaker(s) for outputting low-frequency components of the LFE (low-frequency effect sound) channel or other channels. The output status is as follows. LFE channel signals Parameter Subwoofer Front
  • Yamaha 6260 | Owners Manual - Page 57
    that generates test tones. To turn on the oscillator, select "On" using oCursor l / h. When "On" is selected, you can adjust the settings of "2 Manual Setup" while listening to a test tone. Off Not generate test tones. On Generates test tones. Sound Setup You can set various items for sound
  • Yamaha 6260 | Owners Manual - Page 58
    and audio output. HDMI Auto Choices: Off*/On Automatically adjusts output timing of audio and video signals when a monitor that supports an function. Set the correction time in "Manual Delay." On Select this when the connected monitor supports the automatic lip-sync function. Fine adjust
  • Yamaha 6260 | Owners Manual - Page 59
    INTRODUCTION PREPARATION BASIC OPERATION 2 Display You can set items for a monitor or the front panel display. ■ Dimmer Adjustable range: -4 to 0* Sets brightness of the front panel display. As the value is lowered, the brightness of the front panel display is darkened. Note • The brightness of
  • Yamaha 6260 | Owners Manual - Page 60
    0dB / +16.5dB* (5.0 dB step) Sets the maximum volume level of Zone2, so that the volume will not be accidentally increased. For example, you can +16.5dB (0.5 dB step) Use this feature to set the volume level of Zone2 when the power of Zone2 unit is turned on. Note • If the setting of "Max Volume" is
  • Yamaha 6260 | Owners Manual - Page 61
    receiver in the second zone. • An amplifier and speakers in the second zone. y • Since there are many possible ways to connect and use this unit in a multi-zone configuration, we recommend that you consult with your nearest authorized Yamaha dealer or service center about the Zone2 connections
  • Yamaha 6260 | Owners Manual - Page 62
    on the front panel or on the remote control. The available operations are as follows: • Selecting the input source (AV5-6, AUDIO1-2, V-AUX) of Zone2. • Adjusting the volume of Zone2 (when a Zone2 speaker is connected to the EXTRA SP jack). • Tuning into FM or AM when "TUNER" is selected as the input
  • Yamaha 6260 | Owners Manual - Page 63
    of TV MUTE Mute audio of TV TV VOL Tuner Yamaha 5017 [SIRIUS] [MULTI CH] Tuner - Yamaha - 5009 - "-" indicates no assignment y • An external component that is controlled by the remote remote control codes, refer to "List of remote control codes" at the end of this manual. ■ Default remote
  • Yamaha 6260 | Owners Manual - Page 64
    Choices: ID1*/ID2 Sets a remote control ID. When using multiple Yamaha AV receivers, you can operate them with a single remote control by setting the receiver IDs to the same setting. SR PIN -XXX Choices: RESET/CANCEL Resets Parental lock cord when using SIRIUS Satellite tuner. BI AMP - XXX Choices
  • Yamaha 6260 | Owners Manual - Page 65
    APPENDIX Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service
  • Yamaha 6260 | Owners Manual - Page 66
    Troubleshooting Problem No picture. The sound suddenly goes off. Sound is heard from the speaker on one side only. Only the center speaker outputs substantial sound. No sound is output from a specific and adjust the volume (2 Manual Setup → B)Level). This kSTRAIGHT on the remote control to turn off
  • Yamaha 6260 | Owners Manual - Page 67
    INTRODUCTION PREPARATION BASIC OPERATION ADVANCED OPERATION Troubleshooting Problem Cause Remedy No sound is heard from the surround speakers. No sound is heard from the subwoofer. No sound is heard from the surround back speakers. The audio input sources cannot be played in the desired
  • Yamaha 6260 | Owners Manual - Page 68
    Troubleshooting Problem HDMI components. The connected HDMI component does not support high-bandwidth digital copyright protection (HDCP). Connect an HDMI component that supports HDCP. Tuner (FM/AM) See page - 15 Problem antenna. Tune in manually or by direct frequency tuning. See page 18 - 44 - - 29
  • Yamaha 6260 | Owners Manual - Page 69
    Troubleshooting Problem audio or program information from the XM satellite signal. This message can also occur in weak XM signal conditions. Note that this unit may not respond to some operations while this message is displayed. This message should disappear in a few seconds -Tuner is not receiving
  • Yamaha 6260 | Owners Manual - Page 70
    reassigned to a different channel number. This message may occur initially with a new XM MiniTuner or an XM Mini-Tuner that has not received XM's signal for an extended period. Consult the latest channel guide at http://www.xmradio.com/ for the current list of channels. For cases of a new XM Mini
  • Yamaha 6260 | Owners Manual - Page 71
    .com/ Phone: 1-888-539-SIRIUS (1-888-539-7474) Select another channel. Select another channel. See page 35 35 35 Remote control Problem The remote control does not work or function properly. Cause Remedy Wrong distance or angle. Direct sunlight or lighting (from an inverter type of fluorescent
  • Yamaha 6260 | Owners Manual - Page 72
    in the Yamaha iPod universal dock 17 and then place it back in the dock. Unknown iPod The iPod being used is not supported by This unit supports iPod - Bluetooth™ Problem Searching... Completed Canceled BT Connected Disconnected Cause The Bluetooth wireless audio receiver and the Bluetooth
  • Yamaha 6260 | Owners Manual - Page 73
    the nearest Yamaha dealer or service center. If a monitor such as a TV is connected to this unit via HDMI connection, sound may not be output from this unit due to the HDMI control function. In such a case, change the monitor setting, for example, change the sound output setting to an amplifier so
  • Yamaha 6260 | Owners Manual - Page 74
    Troubleshooting Error (+, -) of the displayed speaker. If they are correct, the speakers work properly even when this message is displayed. W-2:OVER 24m (80ft) The recommended that you use speakers with the same or similar specifications. Adjust the output volume of the subwoofer. W-4:CHECK PRNS
  • Yamaha 6260 | Owners Manual - Page 75
    bitrates up to 6.0 Mbps, Dolby Digital Plus can carry up to 7.1 discreet audio channels simultaneously. Supported by HDMI version 1.3 and designed for the optical disc players and AV receivers/amplifiers of the future, Dolby Digital Plus also remains fully compatible with the existing multichannel
  • Yamaha 6260 | Owners Manual - Page 76
    Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz audio simultaneously. Supported by HDMI version 1.3 and designed for the optical disc players and AV receivers/amplifiers of the future, DTS-HD Master Audio an analog audio signal, the number of times the signal is sampled per second is
  • Yamaha 6260 | Owners Manual - Page 77
    sound. Direct sound, early reflections and subsequent reverberations taken together help us to determine the subjective size and shape of the room room of your own home by using the Yamaha original sound field technology combined with various digital audio systems. ■ CINEMA DSP 3D The actually
  • Yamaha 6260 | Owners Manual - Page 78
    directly (does not decode the bitstream signals on the component). Refer to the supplied instruction manuals for details. • This unit is not compatible with the audio commentary features (for example, the special audio contents downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not
  • Yamaha 6260 | Owners Manual - Page 79
    unit following the instructions for connecting the TV to an AV amplifier. y • The HDMI control-compatible components include Panasonic VIERA Link compatible TV, DVD player/recorder and Blu-ray Disc player. • When a DVD recorder/Blu-ray recorder/HD DVD recorder that supports the HDMI control function
  • Yamaha 6260 | Owners Manual - Page 80
    Specifications AUDIO SECTION • Minimum RMS Output Power for Front, Center, Surround, Surround back [U.S.A. and Canada models] 1 kHz, 0.9% THD, 8 90 W [Other models] 1 kHz, 0.9% THD, 6 90 W • Dynamic Power (IHF) [U.S.A. and Canada models] Front Speakers 8/6/4/2 95/110/130/150 W [Other models]
  • Yamaha 6260 | Owners Manual - Page 81
    AUDIO jack 13 Audio jack 13 AUDIO L/R jack, front panel 4 AUDIO OUT jacks, rear panel 5 Audio Output, 1 HDMI, function setup .........54 Audio player connection 16 Auto Delay, 2 Lipsync, sound setup 54 Auto Preset, OPTION menu 45 Auto Setup (YPAO), troubleshooting 69 Automatic setup 19 AV
  • Yamaha 6260 | Owners Manual - Page 82
    YPAO 19 YPAO, troubleshooting 69 ■Z ZONE2 CONTROL, front panel 4 ZONE2 indicator, front panel display 6 ZONE2 ON/OFF, front panel 4 ZONE2 OUT jacks, rear panel 5 "AMAIN ZONE ON/OFF" or "gPOWER" (example) indicates the name of the parts on the front panel or the remote control. Refer to "Part
  • Yamaha 6260 | Owners Manual - Page 83
    List of remote control codes TV A.R. Systems Acme Acura ADC Admiral Advent Adventura Adyson Agashi Agazi Aiko Aim Aiwa Akai Akiba Akura Alaron Alba Albatron Alcyon Alleron Allorgan
  • Yamaha 6260 | Owners Manual - Page 84
    Fujitsu Siemens Funai Futuretech Galaxi Galaxis Gateway GBC GE Geant Casino GEC Geloso General Technic Genexxa GFM Giant Gibralter GoldHand Goldline GoldStar Goodmans Gorenje GPM GPX Gradiente Graetz Granada Grandin Gronic Grundig Grunpy Haier Halifax Hallmark Hampton Hanseatic Hantarex Hantor
  • Yamaha 6260 | Owners Manual - Page 85
    Neckermann NEI Net-TV Neufunk New Tech New World NewTech Nicamagic Nikkai Nikko Nobliko Nokia Norcent Nordic Nordmende Nordvision Novatronic Oceanic Okano Olevia ONCEAS Onwa Opera Oppo Optimus Optoma Optonica Orbit Orion Orline Osaki Oso Otto Versand Pael Palladium Palsonic Panama Panasonic
  • Yamaha 6260 | Owners Manual - Page 86
    0119, 0260, 0263, 0271, 0274, 0327 Wincom 0055, 0056 Xrypton 0274 Yamaha 0000, 0001, 0002, 0003, 0004, 0005, 0072, 0090, 0096, 0103 ASA 1077, 1078 Asha 1020 Asuka 1072, 1077, 1078, 1079, 1090 Audio Dynamics 1018 Audiosonic 1091 Audiovox 1021 Baird 1072, 1073, 1075, 1091 Bang
  • Yamaha 6260 | Owners Manual - Page 87
    Video Concepts 1018 Videon 1074 Videosonic 1020 Viewsonic 1066 Voodoo 1066 Wards 1020, 1021, 1022, 1023 Weltblick 1077 XR-1000 1022, 1023 Yamaha 1018, 1019 Yamishi 1079, 1090 Yokan 1079, 1090 Yoko 1076, 1077, 1079, 1090 Zenith 1032 ZT Group 1066 DVD 4Kus 2097 Accurian
  • Yamaha 6260 | Owners Manual - Page 88
    Brainwave 2312 Brandt 2198, 2238 Broksonic 2192, 2195 Bush 2018, 2060, 2248, 2264, 2301, 2308, 2317, 2350, 2368 California Audio Labs 2197 Cambridge Audio 2304 CAT 2306, 2307 CAVS 2146 Centrum 2307 CGV 2304, 2312 Changhong 2222 Cinetec 2313 CineVision 2191, 2215 Clatronic
  • Yamaha 6260 | Owners Manual - Page 89
    2036 DVD Recorder Aspire Astar Broksonic Go Video Hitachi Insignia Irradio JVC LG Liteon Panasonic Philips Pioneer Pye Samsung Sansui Sanyo Sony Sylvania Toshiba Yamaha 2140 2162 2192 2135 2108 2080 2103 2054, 2055, 2056, 2057 2107, 2115, 2141, 2188 2121 2037, 2038, 2039, 2041, 2042, 2043, 2089
  • Yamaha 6260 | Owners Manual - Page 90
    Viewmaster Vision Visiopass Vortex View Wittenberg Zenith Zentek 3045 3045 3051, 3054, 3055 3045 3048 3035, 3040, 3046 3044 Sattelite AB Sat AccessHD ADB AGS Akai Alba Aldes Allsat Allsonic Alltech Alpha Alpha Digital Alphastar Amitronica Amstrad Anglo Ankaro Anttron Apollo Armstrong Artec Asat
  • Yamaha 6260 | Owners Manual - Page 91
    , 4136 4084 4084 4095 4084, 4092, 4093, 4136, 4137 4088 4138 4074 4139 4074, 4088, 4090, 4131, 4133 4052, 4057, 4145 4086 CD Yamaha 5000, 5013 CD Recoder Yamaha 5001 MD Yamaha 5002, 5003, 5004 Tape Yamaha 5005, 5006 Tuner Yamaha 5007, 5008, 5009, 5010, 5014, 5015, 5016, 5017, 5018 USB
  • Yamaha 6260 | Owners Manual - Page 92
    © 2009 Yamaha Corporation All rights reserved. Printed in China WQ95420
  • Yamaha 6260 | Owners Manual - Page 93
    letters in circles and the numbers in squares correspond to those in the Owner's Manual. ■ Front panel V U DEF G H I U HTR-6260 Q MAIN ZONE ON/OFF PHONES SILENT CINEMA HDMI THROUGH ZONE2 ON/OFF ZONE2 CONTROL INFO MEMORY BD/DVD l PRESET h SCENE TV CD FM AM l CATEGORY h l TUNING
  • Yamaha 6260 | Owners Manual - Page 94
    ■ Remote control a b e h i j k l m o s t u MAIN ZONE2 TRANSMIT CODE SET POWER SOURCE 1 1 5 SLEEP POWER HDMI 2 3 4 AV 2 3 4 AUDIO 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER SIRIUS CATEGORY FM AM INFO MEMORY XM PRESET MULTI TUN./CH MOVIE ENHANCER SUR. DECODE MUSIC STEREO
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
HTR-6260
AV Receiver
OWNER’S MANUAL
U