Xerox C8 Bulletin - Powering Off and Powering On the CS Platform™
Xerox C8 - DocuPrint Color Inkjet Printer Manual
 |
UPC - 095205007008
View all Xerox C8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Xerox C8 manual content summary:
- Xerox C8 | Bulletin - Powering Off and Powering On the CS Platform™ - Page 1
Powering Off and Powering On the CS Platform™ Procedure Stand-by Power Switch Status LED On / Off Switch Figure 1 Note: Before the IOT is powered off, make sure the IOT is not in the Diagnostic Mode. 1. Power "Off" the IOT 2. Switch "Off" the CS Platform™ using the On / Off Switch. (Figure 1) 3.
-
1
 |
 |
Powering Off and Powering On the CS Platform
™
Procedure
Stand-by Power Switch
Status LED
On / Off Switch
Figure 1
Note:
Before the IOT is powered off, make sure the IOT is
not
in the Diagnostic Mode.
1.
Power “
Off
” the IOT
2.
Switch “
Off
” the CS Platform
™
using the On / Off Switch. (Figure 1)
3.
Switch “
Off
” the Stand-by Power Switch.
4.
Switch “
On
” the Stand-by Power Switch
5.
Switch “
On
” the CS Platform
™
using the On / Off Switch. The CS Platform will beep and
the Status LED should start to blink. This will take approximately 60 seconds.
6.
Power “On” the IOT. Wait for the IOT to indicate that it is “Ready to Print”, before
resuming any CS Platform
™
activity.