Whirlpool WTW6150PB Quick Reference Sheet

W11467157B

TOP LOADING WASHING MACHINE QUICK START GUIDE

OPERATING

INSTRUCTIONS

WARNING:

To reduce the risk of fire, electric shock, or injury to persons,

read the IMPORTANT SAFETY INSTRUCTIONS, located in your

appliance’s Owner’s Manual, before operating this appliance.

Step 1.

ADD HE

DETERGENT

Designed to use only HE (High

Efficiency) detergents.

NOTE:

See ADDING LAUNDRY

PRODUCTS (below) for more

information on adding HE

detergent, fabric softener, and/or

bleach.

Step 3.

PRESS POWER TO

TURN ON THE

WASHER

Step 5.

ADJUST CYCLE

SETTINGS, IF

DESIRED

Step 2.

LOAD CLOTHES

For best results, load garments in

loose heaps evenly around the

basket wall.

Step 4.

SELECT THE

DESIRED CYCLE FOR

YOUR LOAD*

Step 6.

SELECT ADDITIONAL

OPTIONS*

Step 7.

PRESS AND HOLD START/PAUSE TO BEGIN CYCLE

NOTE:

Start button must be held for 1

second to start cycle. Once the status

lights are illuminated, release the start

button.

*Not all cycles, settings or options are available with all models.

ADDING LAUNDRY PRODUCTS

IMPORTANT:

Using non-HE detergent will likely result in longer cycle

times and reduced rinsing performance. It may also result in component

malfunction and, over time, buildup of mold or mildew. HE detergents

should be low-sudsing and quick-dispersing to produce the right amount

of suds for the best performance.

ADDING HE DETERGENT AND FABRIC SOFTENER

Add both liquid HE detergent & fabric

softener (if desired) to the dispenser

drawer. Make sure to choose the

“Fabric Softener” Rinse Option when

adding Fabric Softener.

NOTE:

Follow the manufacturer’s

instructions to determine the amount of

laundry products to use.

ADDING LIQUID CHLORINE BLEACH

Add a measured

amount of liquid

chlorine bleach to the

dispenser cup. Do not

overfill, dilute, or use

more than 1 cup

(236 mL). Do not use

colorsafe bleach or oxi

products in the same

cycle with liquid

chlorine bleach.

Liquid

Chlorine Bleach

CONTROL PANEL AND FEATURES

1

3

4

2

*Appearance may vary depending on model.

1.

POWER

Press to turn on/off or to stop/cancel a cycle.

2.

CYCLE KNOB

Turn knob to select desired cycle.

3.

START/PAUSE

Press and hold the Start/Pause button for a few seconds until

all status lights are illuminated, then release to start cycle.

Press during a cycle to pause cycle and unlock lid.

NOTE:

If machine is spinning it may take longer to unlock

lid.

4.

CYCLE MODIFIERS

(Not all modifiers are available on

all cycles)

TEMP

Press to modify the cycle’s available temperatures (Tap Cold,

Cold, Cool, Warm, or Hot).

NOTE:

Pressing Temp will toggle through available

temperature options. When no lights in the temperature

column are illuminated the selected temperature is Tap

Cold.

RINSE OPTIONS

Press to modify the cycle’s available rinse options. Press once for

Fabric Softener, twice for Extra Rinse and three times to activate

both.

FABRIC SOFTENER

Select this option to let the machine know when you have

added liquid fabric softener.

EXTRA RINSE

Select this option to add a second rinse.

DEEP WATER OPTIONS

Press to modify the cycle’s available deep water options (Medium

or High). Use these options to automatically add more water to

your wash cycle. You can also use this option to reduce the

likelihood of white residue on dark clothing.

NOTE:

If the washer detects an out-of-balance condition it may

pause and attempt and re-distribute the load. During this time the

Sense and Wash status indicators will both briefly illuminate.

WARNING:

Do not wash water-resistant or water repellant-type

clothing. Failure to closely follow these instructions may result in

an abnormal vibrating and out-of-balance condition that could

result in physical injury, property damage, and/or appliance

damage.

CHOOSING THE RIGHT CYCLE

A cycle guide for your washer can be found online at

www.whirlpool.com

. The document will help

identify which cycle to choose for various load types as well as the default cycle options. For example

we recommend using the NORMAL cycle with Warm water for cottons, linens and mixed-garment

loads.

MORE WATER WHEN YOU WANT IT

AUTO SENSING AND DEEP WATER

�

The washer will adjust the water level to

the optimal amount for a High Efficiency

wash of the detected load size.

�

Use one of the Deep Water Options to

automatically add more water to your

wash cycle.

�

It is recommended to use BULKY ITEMS

cycle with Deep Water-High option for

loads where maximum water level is

desired.

�

Expect longer cycle times due to

extended fill duration when using the

Deep Water Options.

CLEANING WITH LESS WATER

The washer has been designed and

optimized to provide a thorough cleaning

using less water to conserve energy and

resources.

As the washer dampens and moves the

load, the level of the items will settle in the

basket. This is normal, and does not

indicate that more items should be added.

IMPORTANT:

You will not see a full basket

of water as with older, less efficient

washing machines. It is normal for some of

the load to be above the water line.

For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual

included with your machine.

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION

For information on any of the following items, a full cycle guide, warranty, detailed product dimensions, or for complete instructions for

use and installation, please visit

www.whirlpool.com/owners

, or in Canada

www.whirlpool.ca/owners

. This may save you the cost of

a service call.

Register

Product

Schedule

Service

How To’s & FAQ

Manuals &

Downloads

Add Service

Plan

Parts

Accessories

Model & Serial

Number Tag

location

To speak with a customer service representative or if you have additional questions, call us toll

free at

1-866-698-2538

or in Canada call

1-800-807-6777

.

You can write with any questions or concerns at:

Whirlpool Brand Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022–2692

Whirlpool Brand Appliances

Customer eXperience Centre

Unit 200-6750 Century Ave

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

IMPORTANT:

Retain this guide for future use.

WARNING

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of

oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

Whirlpool WTW6150PB Quick Reference Sheet

Whirlpool WTW6150PB Manual

Whirlpool WTW6150PB manual content summary: