Weider 214 Instruction Manual
Weider 214 Manual
 |
View all Weider 214 manuals
Add to My Manuals
Save this manual to your list of manuals |
Weider 214 manual content summary:
- Weider 214 | Instruction Manual - Page 1
problems with this product, or if you need to order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Customer Service of the product (WEIDER® 214 weight bench) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY - Weider 214 | Instruction Manual - Page 2
PART LIST/EXPLODED DRAWING are attached in the centre of this manual. Remove the PART IDENTIFICATION CHART/PART LIST/EXPLODED DRAWING before ) V. Hamstring (back of leg) W. Gastrocnemius (back of calf) O P Q R S T U V W X WEIDER is a registered trademark of ICON Health & Fitness, Inc. 2 11 - Weider 214 | Instruction Manual - Page 3
the exercise guide accompanying this manual you will find bench. 1. Read all instructions in this manual before using the weight bench. Use the weight bench only as described in this manual foot protection while exercising. 9. The weight bench is designed to support a maximum user weight of 135 kg - Weider 214 | Instruction Manual - Page 4
healthier cardiovascular system, the WEIDER® 214 weight bench will help you to achieve the specific results you want. For your benefit, read this manual carefully before using the weight bench. If you have questions after reading this manual, please call our Customer Service Department at 08457 089 - Weider 214 | Instruction Manual - Page 5
the Support Rod. 1 6 1 7 3 Locking Pin 8 ASSEMBLY Make Things Easier for Yourself This manual is designed to ensure that the weight bench Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight bench, make sure all parts are oriented as shown in - Weider 214 | Instruction Manual - Page 6
6 9. Tap a 19mm Round Inner Cap (9) into each end of the Support Rod (7). Insert the Support Rod through a set of holes in the Uprights (1). Make sure that the locking pin is on the side shown. Rotate the Support Rod to the locked position, with the locking pin wrapped around the - Weider 214 | Instruction Manual - Page 7
assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST in the centre of this manual. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it - Weider 214 | Instruction Manual - Page 8
3 1 Crossbar 4 1 Leg Lever 5 2 Backrest Tube 6 1 Backrest 7 1 Support Rod 8 1 Front Leg 9 6 19mm Round Inner Cap 10 2 Pad Tube 11 Zinc Nylon Locknut 37 1 Weight Clip # 1 User's Manual # 1 Exercise Guide # 1 Grease Pack "#" Indicates a non-illustrated part.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Model No. WEEVBE35220
Serial No.
Write the serial number in the
space above for future reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal
USER’S MANUAL
Part No. 200607 R0903A
Printed in China © 2003 ICON Health & Fitness, Inc.
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds
LS11 8JG
UK
ORDERING REPLACEMENT PARTS
If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON
Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds
LS11 8JG
UK
Tel:
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
When ordering parts, please be prepared to give the following information:
•
the MODEL NUMBER of the product (WEEVBE35220)
•
the NAME of the product (WEIDER
®
214 weight bench)
•
the SERIAL NUMBER of the product (see the front cover of this manual)
•
the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING in
the centre of this manual)
08457 089 009
www.iconeurope.com
Visit our website at