Vtech RM5754-2HD Quick Start Guide

Go to

www.vtechphones.com

to register your product for

enhanced warranty support and

latest VTech product news.

Congratulations

on purchasing your new VTech product. Before using this HD video monitor, please read

Important safety instructions

.

For support, shopping, and everything new at VTech, visit our website at

www.vtechphones.com.

In Canada, visit

www.vtechcanada.com

.

Frequency

Baby unit: 2412 - 2462 MHz

Channels

11

LCD

5’’ Color LCD

(IPS 1280x720 pixels)

Nominal effective range

Maximum power allowed by FCC and IC. Actual operating range may

vary according to environmental conditions at the time of use.

Power requirement

Parent unit/Baby unit power adapters:

VTech, VT05EUS05100

Rated output: 5V DC, 1000mA.

Parent unit battery: BP1763 (3.7V

2100mAh Lithium-ion battery)

ZhongShan Tianmao battery Co. Ltd.

Specifications are subject to change without notice.

© 2020 VTech Communications, Inc.

All rights reserved. 09/20. RM5754-XHD_QSG_V3

Technical specifications

Android

TM

and

Google Play

TM

are trademarks of Google Inc.

App Store

is a trademark of Apple Inc., registered in the U.S. and other countries.

IOS

is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

UL STD.

62368-1

CERTIFIED TO

CSA STD.

C22.2 NO.62368-1

CONFORMS TO

RM5754HD

RM5754-2HD

5-inch Smart Wi-Fi 1080p

Video Monitor

What does HD Video Monitor do?

VTech 5-inch Smart Wi-Fi 1080p Video Monitor allows you to stay close to your baby when you

are on the move or away.

This monitor is Wi-Fi enabled, which uses your home wireless network to stream live video and

audio through the HD baby unit and 5-inch color screen parent unit. It allows you to maintain a

constant connection to your baby.

You can also monitor from your smartphone and mobile tablet.

VTech 5-inch Smart Wi-Fi 1080p Video Monitor uses

MyVTech Baby 1080p

app to let you

instantly see and hear what’s happening with your baby from anywhere in the world.

The app can be downloaded from the App Store or the Google Play

TM

Store, directly from your

smartphone or mobile tablet.

Disclaimer and Limitation of Liability

VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss

resulting from the use of this user’s manual. VTech Communications, Inc. and its suppliers assume no

responsibility for any loss or claims by third parties that may arise through the use of this product.

Company: VTech Communications, Inc.

Address: 9020 SW Washington Square Road - Ste 555 Tigard, OR 97223, United States

Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada

Quick start guide

RM5754HD

RM5754-2HD

For more support information

S

m

Direct mode

The parent unit and the baby unit of your video monitor connect to each others in

Direct mode

by default, which allows you to stream live video right out of the box.

Direct mode

connection

lets you stream live video from parent unit only.

•

You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are

obstructing factors, such as internal walls, between them. Move the parent unit closer to the baby unit to

improve the signal strength. You can also set up

Router mode

to connect via your home Wi-Fi network to

improve the connection between your parent unit and baby unit.

Router mode

You can continue using your video monitor

with

Direct mode

connection, or you

can set up your monitor in

Router mode

connection.

Router mode

uses your home Wi-Fi

network to connect your video monitor.

It supports streaming live video through

parent unit and smartphone app.

We recommend that you set up your

monitor in

Router mode

to enjoy streaming

live video via your parent unit with better

connection.

If you want to stream live video remotely with your mobile device, download and install the

MyVTech Baby 1080p

mobile app. With the mobile app, your Wi-Fi router (not included)

provides Internet connectivity to your HD video monitor system. It serves as a communicating

channel between your baby unit and mobile device, allowing you to monitor and/or control

your baby unit wherever you are. For detail, see

Download app for mobile access

section in this

quick start guide.

•

Your parent unit detects the connection signal strength. If you have connected your video monitor with

your home Wi-Fi network, your parent unit automatically switches to direct or router mode - the one that

has stronger signal strength.

•

When both parent unit and app are viewing the camera simultaneously, the video quality will be

optimised to deliver the best possible viewing result.

Overview

What’s in the box

Connect, charge and power on the baby monitor

Protect your privacy and online security

x 2

x 2

Important safety

instructions

Quick start

guide

Your HD video monitor package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

How the system works

VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of

industry-recommended best practices to help keep your wireless connection private and

your devices protected when online. We recommend you carefully review and consider

complying with the following tips.

Ensure your wireless connection is secure.

•

Before installing a device, ensure your router’s wireless signal is encrypted by selecting

the “WPA2-PSK with AES” setting in your router’s wireless security menu.

Change default settings.

•

Change your wireless router’s default wireless network name (SSID) to something unique.

•

Change default passwords to unique, strong passwords. A strong password:

- Is at least 10 characters long.

- Is complex.

- Does not contain dictionary words or personal information.

- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.

Keep your devices up to date.

•

Download security patches from manufacturers as soon as they become available. This

will ensure you always have the latest security updates.

•

If the feature is available, enable automatic updates for future releases.

Disable Universal Plug and Play (UPnP) on your router.

•

UPnP enabled on a router can limit the effectiveness of your firewall by allowing other

network devices to open inbound ports without any intervention or approval from you.

A virus or other malware program could use this function to compromise security for the

entire network.

For more information on wireless connections and protecting your data, please review the

following resources from industry experts:

1.

Federal Communications Commission: Wireless Connections and Bluetooth Security Tips

–

www.fcc.gov/consumers/guides/how-protect-yourself-online

.

2.

U.S. Department of Homeland Security: Before You Connect a New Computer to the

Internet –

www.us-cert.gov/ncas/tips/ST15-003

.

3.

Federal Trade Commission: Using IP Cameras Safely –

https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely

.

4. Wi-Fi Alliance: Discover Wi-Fi Security –

http://www.wi-fi.org/discover-wi-fi/security

.

Parent unit icons

For mobile access:

MyVTech Baby 1080p

mobile app

Network

Wi-Fi

Wi-Fi router

2.4GHz 802.11 b/g/n

Internet connection

1.5 Mbps @ 720p or 2.5 Mbps @1080p upload

bandwidth per baby unit

Requirements

Main

Menu

Options

Monitoring mode

(* For

RM5754-2HD

only)

• View baby unit 1 or 2 in

Single

mode.

• View both baby units in

Patrol

mode.

• View both baby units in

Split

screen.

Nigh light

• Select color 1, 2 or 3.

• Turn off night light.

Melodies and soothing sounds

• Select play all melodies, or play

one of the five melodies and

four soothing sounds.

• You can also set the timer to

stop playing after 15, 30 or 60

minutes, or playing non-stop.

Alerts - Sound, motion and temperature

• Select the sound and motion

sensitivity level.

• Turn on/off sound and motion

detection alerts.

• Select maximum and minimum

temperature for alert range.

• Turn on/off temperature alert.

• Turn on/off

Auto Wake Up

function.

Parent unit settings

• Adjust parent unit screen

brightness.

• Turn on/off dim mode.

Baby unit settings

• Turn on/off

Night Vision

.

• Turn on/off baby unit’s status LED.

• Adjust baby unit’s speaker

volume.

• Update baby unit’s security key.

Main

Menu

Options

General settings

• Connect to home Wi-Fi network.

• Turn on/off

Parent unit Wi-Fi

Connection

.

• Connect mobile phone.

• Turn on/off

Low Battery Alert Tone

.

• Turn on/off

No Link Alert Tone

.

Baby unit overview

1

Light sensor

2

Camera lens

3

Microphone

4

Infrared LEDs

•

Allow you to see clearly in a dark surrounding.

5

Speaker

6

•

Press to turn the night light on or off.

7

LED indicator

•

Orange is steady on when the baby unit

is connecting to the parent unit in direct

mode.

•

Green is steady on when the baby unit and

parent unit are connecting to your home

Wi-Fi network via the Wi-Fi router.

•

Flashes orange slowly during video

streaming in direct mode.

•

Flashes green slowly during video

streaming via home Wi-Fi network.

8

ON

• Power on/off switch.

9

PAIR

•

Press and hold for three seconds to enter

pairing mode.

•

Reset the baby unit to factory default.

1. Press and hold

PAIR

key until you hear

a beep sound.

2. Release the

PAIR

key, and then press

the

PAIR

key again five times until you

hear another beep sound.

3. The baby unit will sound another beep

when the reset completes. Then, the

baby unit will reboot.

10

Night light

11

Temperature sensor

12

Slots for wall mounting

•

Wall mount bracket is included in your

package.

13

Power jack

1

2

3

4

5

6

7

8

9

10

11

12

13

Connect the baby monitor

•

The rechargeable battery in the parent unit is built-in.

•

Use only the power adapters supplied with this product.

•

Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets.

•

Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not

designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling,

under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.

•

Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.

Charge the parent unit battery before use

The parent unit runs on rechargeable battery or AC power. To continuously monitor your

baby, keep the parent unit connected to AC power. With the battery alone, the parent unit

can cordlessly run for a short time only.

•

Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When

the parent unit battery is fully charged, the battery icon becomes solid

.

•

The standby time varies depending on your actual use.

After the parent unit is fully charged, press

POWER

until the welcoming screen appears.

The battery icon indicates the battery status (see the following table).

Battery indicators

Battery status

Action

The screen displays

and

. The

light flashes.

The battery has very little

charge and may be

used

for only a short time.

Charge

without interruption

(about

30 minutes).

The battery icon becomes

solid

.

The battery is fully

charged.

To keep the battery charged, connect

it to AC power when not in use.

Raise the parent unit antenna for better reception

Slide the switch to

ON

to power on your baby unit.

•

When powering up, the baby unit’s status LED turns on.

It will turn off after a while and keeps off.

•

The status LED is set to off by default. If you want to

keep the LED on, press

MENU

, then go to

>

Status LED

and turn it on.

1 set for RM5754HD

2 sets for RM5754-2HD

Status icons

Direct mode

Parent unit, baby unit 1 and baby unit 2

(*For

RM5754-2HD only

) are connected to

each others directly.

Router mode

Parent unit, baby unit 1 and baby unit 2

(*For

RM5754-2HD only

) are connected to

home Wi-Fi network.

Baby unit 1 and 2 are being viewed in

Patrol

mode (*For

RM5754-2HD

only).

Baby unit 1 and 2 are being viewed in

Split

mode (*For

RM5754-2HD

only).

Night vision is turned on.

Motion alert is turned on.

Sound detection alert is turned on.

Melodies and soothing sounds are turned

on.

Night light is turned on.

Parent unit speaker is muted.

Temperature alert is turned on.

NOTE:

Camera lens and surface may get

warm during normal operation.

WARM

WARM

Parent unit overview

1

LINK LED light

• On when the parent unit is linked to the

baby unit.

• Flashes when the link to the baby unit

is lost.

2

LED light

• On when the parent unit is connected to

AC power, and the battery is charging.

• Off when the parent unit is

disconnected from AC power, or when

the parent unit is connected to AC

power and the battery is fully-charged.

• Flashes when the parent unit battery is

low and needs charging.

3

3- level sound indicator light

• Green on when low sound level is

detected by the baby unit.

• Green and amber on when moderate

sound level is detected by the baby

unit.

• Green, amber and red on when high

sound level is detected by the baby

unit.

4

TALK /

• Press and hold to talk to the baby unit.

• While in a submenu, press to exit.

5

• Press to zoom in/out.

6

Arrow keys

,

,

or

• Press to navigate leftward, upward,

rightward or downward, within the

main menu and submenus.

• While viewing zoomed image, press

to move the zoomed image leftward,

upward, rightward or downward.

7

MENU/SELECT

• Press to enter the main menu.

• While in a menu, press to choose an

item, or save a setting.

8

- VOL/ VOL +

• Increase or decrease parent unit’s

volume.

9

Microphone

10

Speaker

11

POWER / LCD ON/OFF

12

Power jack

13

RESET

• Force reboot the parent unit.

14

Antenna

15

Stand

Local access

Mobile access

Enhanced local access

2

1

3

4

5

6

7

8

9

12

13

14

15

11

10

Vtech RM5754-2HD Quick Start Guide

Vtech RM5754-2HD Manual

Vtech RM5754-2HD manual content summary: