Vtech CS6529-4B Quick Start Guide

Quick start guide

CS6529/CS6529-14/CS6529-15/CS6529-16/

CS6529-17/CS6529-19/CS6529-2/

CS6529-25/CS6529-26/CS6529-3/

CS6529-4/CS6529-4B

Introduction

This quick start guide provides you with the basic installation

and setup instructions. A limited set of features are

described in abbreviated form.

You may refer to the Abridged user’s manual provided in the

product package for installation and operation instructions,

or see the online Complete user’s manual at

www.vtechphones.com for complete installation and

operation instructions.

Telephone base and charger installation

Install the telephone base and charger as shown below.

Plug the battery connector

securely into the socket.

1.

Place the battery with the

label

THIS SIDE UP

facing

up and the wires inside the

battery compartment.

2.

Slide the battery

compartment cover towards

the center of the handset

until it clicks into place.

3.

Place the handset in the

telephone base or charger

to charge.

4.

Enter the handset menu

Press

MENU

.

Press

or

until the screen displays the desired

feature menu.

Press

SELECT

.

To return to the previous menu, press

CANCEL.

To return to idle mode, press and hold

CANCEL.

1.

2.

3.

•

•

Set date and time

Press

MENU

.

Scroll to

Set date/time

, then press

SELECT

.

Use the dialing keys (

0

-

9

) to enter the month, date and year

and then press

SELECT

.

Use the dialing keys (

0

-

9

) to enter the hour and minute.

Press

or

to select

AM

or

PM

.

Press

SELECT

.

Set number of rings

You can set the answering system to answer an incoming call

after two, three, four, five or six rings; or toll saver. With toll

saver selected, the answering system answers after two rings

when you have new messages, or after four rings when you

have no new messages.

Press

MENU

.

Scroll to

Answering sys

, then press

SELECT

.

Scroll to

Ans sys setup

, then press

SELECT

.

Scroll to

# of rings

, then press

SELECT

.

Press

or

to choose

6

,

5

,

4

,

3

,

2

or

Toll saver

,

then press

SELECT

.

Record your own announcement

You can use the preset announcement to answer calls,

or replace it with your own recorded announcement. The

announcement can be up to 90 seconds in length.

Press

MENU

.

Scroll to

Answering sys

, then press

SELECT

twice.

Press

7

to record.

Speak towards the microphone after the handset announces,

“

Record after the tone. Press

5

when you are done

.”

Press

5

when finished.

IMPORTANT!

Refer to the online Complete user’s manual for a full set of

installation and operation instructions. For manual download or

customer service, visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call

1 (800) 267-7377.

Copyright © 2015 for VTech Communications, Inc.

All rights reserved. Printed in China.

96-010377-010-100

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

Battery installation and charging

Install the battery as shown below. Once you have installed the

battery, you may be able to make and receive short calls. For best

performance, charge the handset battery continuously for at least

11 hours.

Use only the power adapters and batteries supplied with

this product.

If you subscribe to telephone service from a cable

company or a VoIP service provider, contact your cable/

VoIP service provider for more information.

•

•

Charger

Telephone base

Telephone wall jack

Electrical outlet

(not controlled

by a wall switch)

Telephone base

power adapter

A DSL filter

(not included) is

required if you

have DSL

high-speed

Internet service.

The DSL filter

must be plugged

into the telephone

wall jack.

Telephone line

cord

Electrical outlet

(not controlled

by a wall switch)

Charger adapter

IMPORTANT:

Check for a dial tone by pressing

. If you hear a dial tone, the

installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures described above are

properly done.

It may be a wiring problem. If you have changed your telephone

service to digital service from a cable company or a VoIP service

provider, the telephone line may need to be rewired to allow

all existing telephone jacks to work. Contact your cable/VoIP

service provider for more information.

•

•

Vtech CS6529-4B Quick Start Guide

Vtech CS6529-4B Manual

Vtech CS6529-4B manual content summary: