URC MRX-4IR Owners Manual

URC MRX-4IR Manual

URC MRX-4IR manual content summary:

  • URC MRX-4IR | Owners Manual - Page 1
    Owner's Manual MRX-4IR Network Base Station
  • URC MRX-4IR | Owners Manual - Page 2
    MRX-4IR Network Base Station Owners Manual ©2012 - 2013 Universal Remote Control, Inc. The information in this Owner's Manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE
  • URC MRX-4IR | Owners Manual - Page 3
    TABLE OF CONTENTS Introduction 1 Features and Benefits 1 Parts Guide 1 Front, Rear and Bottom Panel Descriptions 2 Network Installation 5 Network Discovery & Download 6 Optimizing IR Flasher Levels 7 Overview of IR Routing 8 Limited Warranty Statement 9 End User Agreement
  • URC MRX-4IR | Owners Manual - Page 4
    Size The small size of the MRX-4IR allows it to easily fit behind devices or into places where a traditional base station would not. Parts Guide The MRX-4IR includes: 1 - MRX-4IR 1 - AC Power Adapter 4 - Mounting Screws 1 - Mounting Plate 4 - IR Emitters (3.5mm plugs) 1 - Owner's Manual Page 1
  • URC MRX-4IR | Owners Manual - Page 5
    consists of 3 indicator lights and an IR Blaster. IR Blaster Power LED: The Power LED illuminates when the unit is powered. Status LED: When the MRX-4IR powers up, both the Status and Data LEDs blink. When a network connection is made, the Status LED color will vary depending upon its "connected
  • URC MRX-4IR | Owners Manual - Page 6
    MRX-4IR NETWORK BASE STATION Rear Panel The rear panel ports are: DC 12V Power: Plug in the included 12V DC 1A power supply. IR Outputs: Connect
  • URC MRX-4IR | Owners Manual - Page 7
    the bottom of the unit, and requires a stylus, or paper clip to press the button. Pressing the Reset button will cycle the MRX-4IR's power. (Unplugging the MRX-4IR's power cable and then plugging it back in, also performs the same function.) Pressing and holding the Reset button for 15 seconds, will
  • URC MRX-4IR | Owners Manual - Page 8
    !! Before proceeding, a Custom Professional is required to install and configure your MRX-4IR. The MRX-4IR is a network base station that allows full control of your components with the use of Total Control MRX Advanced System Controllers and compatible interfaces. Once installed on the network, and
  • URC MRX-4IR | Owners Manual - Page 9
    Network Discovery & Download WARNING!! Before proceeding, a Custom Professional is required to install and configure your MRX-4IR. 1. Open a new or current project. In Step 3: Add URC Devices, add an MRX-4IR to a room included in your project which represents the physical location of the unit. 2. In
  • URC MRX-4IR | Owners Manual - Page 10
    MRX-4IR , you should test them thoroughly. Put up the on screen guide and test the navigation arrows. If operation is inconsistent or sluggish flashers in a cabinet, you can have difficulty adjusting the IR Output. Program URC Accelerator to send IR commands only via a specific IR port (1-4), then
  • URC MRX-4IR | Owners Manual - Page 11
    to control an array of components: 1. When connecting a flasher from the MRX-4IR to your compo- nent make sure to notate the IR outputs being used. Program the sameport designations into URC Accelerator. 2. Assigning each component with its own individualized port number helps to control multiple
  • URC MRX-4IR | Owners Manual - Page 12
    MRX-4IR NETWORK BASE STATION Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. ("URC") warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for one (1) year from purchase when such is purchased from URC.
  • URC MRX-4IR | Owners Manual - Page 13
    MRX-4IR NETWORK BASE STATION SKILL AND CARE, OR OUTCOME OR RESULTS. WITHOUT IN ANY proof of purchase is required. For the URC equipment support and other important information, please visit URC's website available at www.universalremote.com or call the Customer Service Center at (914) 835-4484. This
  • URC MRX-4IR | Owners Manual - Page 14
    MRX-4IR NETWORK BASE STATION With the exception of URC's IR-only, broad-based consumer remotes, none of URC's PC programmable remotes or any of our Total Control® whole-house equipment are authorized for online internet sales. Buying URC's PC programmable remotes or any of our Total Control® whole-
  • URC MRX-4IR | Owners Manual - Page 15
    MRX-4IR NETWORK BASE STATION Specifications CPU : ARM 32-bit Cortex-M3(120MHz) Memory : 128Kbyte SRAM, 768Kbyte Flash Macro Capability : Up to 255 steps each IR Range(
  • URC MRX-4IR | Owners Manual - Page 16
    MRX-4IR NETWORK BASE STATION Federal Communication Commission Interference Statement This equipment has been radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
  • URC MRX-4IR | Owners Manual - Page 17
    Low Voltage Directive l Product safety: EN 60950-1 n Safety instruction for charging internal rechargeable battery of remote control Use only with EN60950 "Hereby, Universal Remote Control Inc. declares that this MRX-4IR is in compliance with the Essential requirements and other relevantprovisions
  • URC MRX-4IR | Owners Manual - Page 18
    . : 500 Mamaroneck Avenue, Harrison, NY 10528, U.S.A www.universalremote.com : Phone: (914)835-4484 Fax: (914)835-4532 : UNIVERSAL remote control : Base Station : MRX-4IR This product herewith complies with the requirements of EMC Directive (2004/108/EC) and R&TTE Directive(1995/5/EC) issued by the
  • URC MRX-4IR | Owners Manual - Page 19
  • URC MRX-4IR | Owners Manual - Page 20
    500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com OCE-0131A Rev 02
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

Owner’s Manual
MRX-4IR
Network Base Station