TP-Link TL-SC3171G User Guide
TP-Link TL-SC3171G Manual
 |
UPC - 845973054038
View all TP-Link TL-SC3171G manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-SC3171G manual content summary:
- TP-Link TL-SC3171G | User Guide - Page 1
TL-SC3171G Wireless Day/Night Surveillance Camera REV: 1.0.1 1910010431 - TP-Link TL-SC3171G | User Guide - Page 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced - TP-Link TL-SC3171G | User Guide - Page 3
This equipment has been tested and found to if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more - TP-Link TL-SC3171G | User Guide - Page 4
IP Camera via Web Browser 5 3.1 Obtain the IP Address ...5 3.2 Windows Web Browser 7 3.3 Mac Web Browser ...9 Chapter 4 Operating IP Camera IP Camera via iPhone Default...19 Chapter 6 Setting-BASIC...20 6.1 System ...20 6.1.1 Information ...20 6.1.2 Date/Time...21 6.1.3 Initialize ...22 6.2 Camera - TP-Link TL-SC3171G | User Guide - Page 5
-Point Protocol over Ethernet 31 6.3.3 DDNS (Dynamic DNS 32 6.3.4 UPnP (Universal Plug and Play 36 6.3.5 Bonjour...37 6.3.6 IP Notification ...38 6.3.7 Wireless ...40 6.3.8 Messenger ...44 6.4 Security ...49 6.4.1 Account ...50 6.4.2 HTTPS ...51 Chapter 7 Setting-Advance...53 7.1 FTP client ...53 - TP-Link TL-SC3171G | User Guide - Page 6
in your package: ¾ TL-SC3171G Wireless Day/Night Surveillance Camera ¾ Power Adapter ¾ Mounting Bracket with three screws, a Lock Ring, a Brace and a Base Plate ¾ RJ45 Cable ¾ Quick Installation Guide ¾ Resource CD, including: z This User Guide z Application Guide z Other helpful information ) Note - TP-Link TL-SC3171G | User Guide - Page 7
this IP-Camera normally. If your computer doesn't meet these requirements below, it might cause some problems. Item record video file, please install Xvid codec while installing Intelligent IP Installer. (For Windows 98, ME or 2000 server, the codec might not work properly. You'll need to download - TP-Link TL-SC3171G | User Guide - Page 8
audio. Audio Out: To support audio out with earphones or speakers for two way audio. Power Connector: For connection of 12V DC input. Power LED Indicator: Power LED will light up after completing the boot process. Reset: To successfully restore the camera to factory defaults, please keep the device - TP-Link TL-SC3171G | User Guide - Page 9
for at least 10 seconds. The CPU of the camera starts to work completely 1 minute after you release the Reset button. I/O Terminal Connector: Input/Output to support External Alarm and Sensor used for motion detection, event triggering and alarm notification, etc. Network Connector: For connection - TP-Link TL-SC3171G | User Guide - Page 10
Chapter 3 Using IP Camera via Web Browser 3.1 Obtain the IP Address 1. Insert the provided CD into your CD-ROM driver. The Setup Wizard will automatically pop up on your computer's screen as shown in the figure below. Figure 3-1 2. Choose the Intelligent IP Installer, and then the next screen - TP-Link TL-SC3171G | User Guide - Page 11
is finished, click Start > Program Files > TP-LINK >Intelligent IP Installer to start using the program. Figure 3-3 4. The following screen will then display. Click the Search button to search Network Cameras in the network; it displays Network Cameras information including IP Address. 6 - TP-Link TL-SC3171G | User Guide - Page 12
Web Browser 1. Click Link to IE button in Figure 3-4 or launch your web browser, and enter the IP address (obtain from Figure 3-4Figure 3-4) of the IP camera in the Location / Address field of your browser. ) Note: 1) For the first time login with IE, you will need to enable "Download signed ActiveX - TP-Link TL-SC3171G | User Guide - Page 13
below. Figure 3-5 ) Note: The default User name "admin" and Password "admin" are set at the factory for the administrator. You can change them in the Account Menu (Please check "SETTING → BASIC → Security → Account"). 3. The web- - TP-Link TL-SC3171G | User Guide - Page 14
the screen as the figure below shown, and enter the IP address of the IP camera (which can be obtained from Figure 3-4) in the Location / Address field of your browser. ) Note: If you only want to view the video without setting page, enter "http:///index2.htm" as your web URL. For example, you - TP-Link TL-SC3171G | User Guide - Page 15
2. Enter the default User name "admin" and password "admin" in the dialog box as shown below. Figure 3-8 ) Note: The default Name "admin" and Password "admin" are set at the factory for the administrator. You can change them in the Account Menu (Please check "SETTING → BASIC → Security → Account"). - TP-Link TL-SC3171G | User Guide - Page 16
3. The web-based management page will be display on your screen. In the leftmost column of the web-based management page are Setting, Client Setting, and Image Setup. For more details, you can refer to Section 5.2, Section 5.3 and Section 5.4. Figure 3-9 11 - TP-Link TL-SC3171G | User Guide - Page 17
Mobile Phone Streaming Viewing For 3G mobile phone viewing, type "rtsp://:/video.3gp " into your 3G Streaming Link. is the Public IP address of your IP camera; is the RTSP port of your IP camera (Default value is 554.) Example: rtsp://100.10.10.1:554/video.3gp ) Note: You can - TP-Link TL-SC3171G | User Guide - Page 18
4.2 Using IP Camera via iPhone You can use TP-LINK Web User Interface via iPhone. Please follow the setting process below. Then you can use TP-LINK Web UI via iPhone. 1. Select Safari function 2. Enter IP address in your web link. 3. Enter name and password. Default values are both admin. Then - TP-Link TL-SC3171G | User Guide - Page 19
Manual are all orange. Please note that they're from our latest firmware, which can be downloaded from our website. Web pages in our previous firmware Live View 5.1.1 Snapshot You can capture a still image shot by the camera and save it in your computer. Symbols Meaning Save Image Close click to - TP-Link TL-SC3171G | User Guide - Page 20
Meaning Pause the current video Play the video Stop the current video Record the current video 5.1.4 Audio buttons Symbols Meaning Speakers turned on Speakers from the connected IP camera(s) mean you can broadcast to the connected IP camera(s) via the Ethernet using your microphone 15 - TP-Link TL-SC3171G | User Guide - Page 21
Advance settings menus. There are four sub-menus under the BASIC menu, which includes System, Camera, Network, and Security. For more information, you can refer to Section 6.1 System, Section 6.2 Camera, Section 6.3 Network and Section 6.4 Security. There are eight sub-menus under the Advance menu - TP-Link TL-SC3171G | User Guide - Page 22
mode. ) Note: MJPEG streaming is unavailable if RTSP mode is On (Please check SETTING → BASIC → Camera → General). 5.3.2 View Size Select the desired display to Client Setting to select a suitable View Size before using the IP camera as shown in the figure below. For the PC whose resolution is less - TP-Link TL-SC3171G | User Guide - Page 23
the transferring protocol from TCP, UDP, HTTP and Multicast. ) Note: This item appears only when RSTP mode is enabled (selecting SETTING → BASIC → Camera → General). 5.3.4 Video Buffer Turn the Video Buffer function ON / OFF. The Video Buffer function makes the streaming more smoothly in unsteady - TP-Link TL-SC3171G | User Guide - Page 24
three main attributes of perceived color, which is affected by different wavelength of color. With higher value of hue, color will be much more vivid. 5.4.5 Default After the adjustment of all settings, you can still click - TP-Link TL-SC3171G | User Guide - Page 25
the submenus including System, Camera, Network, and Security. 6.1 System Click System to display the submenus including Information, Date/Time, and Initialize. 6.1.1 Information The Information page provides the basic information of the product which includes Product name, Firmware version and Web - TP-Link TL-SC3171G | User Guide - Page 26
the current date and time of this IP Camera. z Synchronize with PC: Select this mode to keep the date and time of this IP Camera the same with the monitoring PC. z Manual setting: Select this mode to adjust manually the date and time of this IP Camera. z Synchronize with NTP: Specify the NTP server - TP-Link TL-SC3171G | User Guide - Page 27
to specified location. ¾ Restore setting: Download the saved setting data of this IP Camera. Click Browse... and select the saved file. Click OK and this IP Camera is adjusted according to the loaded data and then restarted. ¾ Firmware upgrade: Upgrade the device software. Click Browse... and select - TP-Link TL-SC3171G | User Guide - Page 28
IP Camera power or disconnect the network until the upgrading is completed. ¾ Upload language pack: Upgrade the device language pack. Click Browse... and select the file for upgrading. A confirmation dialogue will appear. Click OK to start upgrading. The upgrade is applied immediately. The default - TP-Link TL-SC3171G | User Guide - Page 29
to remotely control a streaming video server. RTSP is supports by most of the media clients such as user-defined text. Also, you can change the background color. z Privacy Mask: You can cover a specific area of the video image. 6.2.2 MPEG4 A. Computer View If RTSP is On (see Setting →Basic → Camera - TP-Link TL-SC3171G | User Guide - Page 30
users will be requested to type in username and password when viewing through RTSP. ¾ Multicast Streaming (If it is ON) z Multicast address: Specify the multicast server address , 1536, and 2048 kbps. If RTSP is Off (see Setting →Basic → Camera → General), the screen will display as shown below. 25 - TP-Link TL-SC3171G | User Guide - Page 31
(see Setting →Basic → Camera → General), the screen will display as shown below. ¾ Viewer Authentication: If the viewer authentication is On, the users will be requested to type in username and password when viewing through RTSP. ¾ Multicast Streaming (If it is On) z Multicast Address: Specify the - TP-Link TL-SC3171G | User Guide - Page 32
to 65534. It is set to 10000 and 11000 by default. z Time-To-Live: Set the maximum TTL(Transistor-Transistor , 128, 256bps. If RTSP is Off (see Setting →Basic → Camera → General), the screen will display as shown below. 6.2.3 MJPEG If RTSP is On (see Setting →Basic → Camera → General), the screen - TP-Link TL-SC3171G | User Guide - Page 33
If RTSP is Off (see Setting →Basic → Camera → General), the screen will display as shown below. ¾ Image Size: Specify the image size when the network camera transmits. You can choose among 640 x 480, 320 including Information, PPPoE, DDNS, UPnP, Bonjour, IP Notification, Wireless and Messenger.. 28 - TP-Link TL-SC3171G | User Guide - Page 34
6.3.1 Information The page of Information displays the MAC address of the device. ¾ Obtain an IP address automatically (DHCP): (If a DHCP server is installed on the network) Select this, the IP will be assigned by the DHCP server. ¾ Obtain DNS server address automatically: Select this to obtain the - TP-Link TL-SC3171G | User Guide - Page 35
IP address: Select this when the fixed IP address is set. z IP address: Enter the IP address of the device. z Subnet mask: Enter the subnet mask. z Default gateway: Enter the default gateway. ¾ Use the following DNS server address: Select this when you set the fixed IP address as the IP address - TP-Link TL-SC3171G | User Guide - Page 36
function at the same time. ¾ IP address: The IP address obtained when the IP camera connecting with network at PPPoE. ¾ User ID: Enter the user ID for authentication necessary for PPPoE connections. Type it up to 64 characters. ¾ Password: Enter the password for authentication necessary for PPPoE - TP-Link TL-SC3171G | User Guide - Page 37
you can get the IP address of the camera by IP Notification function. For more details, please refer to Section 6.3.6 IP Notification. 4) If the IP Notification function is not configured to report the IP address of the camera, you can reset the camera to its factory default settings by pressing the - TP-Link TL-SC3171G | User Guide - Page 38
from the list. ¾ User ID: Enter the user ID for authentication necessary for DDNS connections. Type it up to 64 characters. ¾ Password: Enter the password for authentication necessary for DDNS connections. Type it up to 32 characters. ¾ Re-type password: Re-type the password to confirm. ¾ Host - TP-Link TL-SC3171G | User Guide - Page 39
2. Input all information and follow step by step with DynDNS. . 3. Log in with new account and click Account → My Hosts → Add Host Services. 34 - TP-Link TL-SC3171G | User Guide - Page 40
4. Type domain in the Hostname field and select sub-domain. 5. After typing in information, check your DDNS service. 35 - TP-Link TL-SC3171G | User Guide - Page 41
6. Type your DDNS User ID, Password and Host name in Setting → Basic → Network → DDNS. After completing setting, reboot IP Camera. 6.3.4 UPnP (Universal Plug and Play) Choose menu "Network→UPnP", and needed. UPnP devices can be automatically discovered by the UPnP service application on the LAN. 36 - TP-Link TL-SC3171G | User Guide - Page 42
inside user. 6.3.5 Bonjour Bonjour, also known as zero-configuration networking, enables automatic discovery of computers, devices, and services on IP networks. Bonjour uses industry standard IP protocols to allow devices to automatically discover each other without the need to enter IP addresses or - TP-Link TL-SC3171G | User Guide - Page 43
.com/support/downloads/bonjourforwindows.html 6.3.6 IP Notification Once IP Notification is set to "On", the camera will automatically send an e-mail notification to tell users its updated network parameters if the network settings about IP address, network connection type, HTTP port or wireless - TP-Link TL-SC3171G | User Guide - Page 44
updated network information of the camera. ¾ SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address of the SMTP server. ¾ SMTP Server Port: You can set port number from 1~65535 according to your mail server. The default value is - TP-Link TL-SC3171G | User Guide - Page 45
. ¾ Message: Type the text of the E-mail up to 384 characters. Default value provides network information including IP, Port, MAC, Model, Firmware Version and Web Version. 6.3.7 Wireless Choose Network → Wireless, you can configure the wireless function for the camera in the figure below. 40 - TP-Link TL-SC3171G | User Guide - Page 46
cable network connection. Please follow the setting process below step by step: 1. Connect IP Camera with Ethernet connection. 2. Go to SETTING → BASIC → Network → Wireless, and choose option "On". You will see the wireless setting page. 3. Then click Refresh. All access points (AP) around you will - TP-Link TL-SC3171G | User Guide - Page 47
4. Select the AP you wish to connect. 5. Enter password in Passphrase field if you need. If you don't know the setting of the wireless AP, please ask your network administrator. 42 - TP-Link TL-SC3171G | User Guide - Page 48
6. Choose the option of Obtain an IP address automatically (DHCP) or Use the following IP address: 43 - TP-Link TL-SC3171G | User Guide - Page 49
OK. 8. Please unplug the Ethernet cable connecting the TL-SC3171G and the Router (or the PC), and log into the IP camera with its wireless address. 6.3.8 Messenger (Supports up to Windows Live Messenger version 8089) If the firmware of your IP Camera has been updated to LM.1.6.16.03P5, then the - TP-Link TL-SC3171G | User Guide - Page 50
password: Type the password again. ¾ Alias: Give an alias for the account of your IP Camera. The figure above takes "TL-SC3171G" for example. ¾ Port range: Enter the port range used. ¾ IP Notification: When this feature is enabled, the IP camera would notify "friends" on MSN about its IP address - TP-Link TL-SC3171G | User Guide - Page 51
a Modem Router to access the Internet, you should set your IP Camera as the virtual server with port range 20000-21000 on the Messenger" page. Enable Messenger and then set the Login Account, Password, Alias, Port range, IP Notification, Privacy and Allow list parameters as the above figure shows. - TP-Link TL-SC3171G | User Guide - Page 52
when you install IntelligentIPInstallerSetup(TPLink)-1.1.16.09.exe. ▲ You can download the IntelligentIPInstallerSetup(TPLink)-1.1.16.09.exe here: http://www.tp-link.com/download/ipcamera/Intelligent_IP_Installer.rar 3. Log into your MSN account. 4. Add the camera's MSN account as a contact - TP-Link TL-SC3171G | User Guide - Page 53
5. Check its status. Normally it should be online. 6. Click the camera icon and select View a contact's webcam to view the video. 48 - TP-Link TL-SC3171G | User Guide - Page 54
7. Wait for a moment, and you will see the video captured by your IP Camera. 6.4 Security Click Security to display the submenus including Account and HTTPS. 49 - TP-Link TL-SC3171G | User Guide - Page 55
The device default account and password setting is "admin / admin". That means everyone who knows IP address can access the device including all configuration. Therefore, it is necessary to assign a password if the device is intended to be accessed by others. ¾ User name: Set a user name between - TP-Link TL-SC3171G | User Guide - Page 56
Authentication is not required to access the camera. Click Off and select one (among Admin, Operator and Viewer) from the pull-down list as default, then all users can view directly the video with the default permission without entering username and password. * If you want to have a higher authority - TP-Link TL-SC3171G | User Guide - Page 57
) Note: 1) When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio. 2) When enable HTTPS with RTSP off mode, the IP Camera will protect all setting including video and audio. 52 - TP-Link TL-SC3171G | User Guide - Page 58
and sending images to an FTP server. By using FTP client function, you can send the image and video file which has been shot and recorded linked with the built-in motion detection function to FTP server. FTP client setting menu is composed of three items, General, Alarm sending and Periodical - TP-Link TL-SC3171G | User Guide - Page 59
the FTP server name to upload still images up to 64 characters, or the IP address of the FTP server. ¾ User name: Type the user name for the FTP server. ¾ Password: Type the password for the FTP server. ¾ Retype password: To confirm the password, type the same characters as you have typed in the - TP-Link TL-SC3171G | User Guide - Page 60
¾ Remote Path: Type the path to the destination in FTP server up to 64 characters. ¾ Image File Name: Type the file name you want to assign to the images when sending to the FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for naming. ¾ Suffix: Select a suffix - TP-Link TL-SC3171G | User Guide - Page 61
) Note: 1) You can set motion detection on motion detection page (Please go to "Setting → Advance →Motion detection → Setting"). For more details, you can check Section 7.7. 2) Motion Detection works only when the MPEG4 function is On and the Cropping is set to Off. z Alarm Input: Select the - TP-Link TL-SC3171G | User Guide - Page 62
7.5. 7.1.3 Periodical sending You can set to send an image file to FTP server periodically by selecting On to send the image file to FTP server linked with setting period. 57 - TP-Link TL-SC3171G | User Guide - Page 63
¾ Remote Path: Type the path to storage location of FTP server which you have authorized. ¾ Image file name: Type the file name of the image sent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score). ¾ Suffix: Select a suffix to be added to the file name sent by SMTP. z None: The - TP-Link TL-SC3171G | User Guide - Page 64
want to send an image via e-mail. By using Mail (SMTP) function, you can send a mail with attached image and video which has been shot linked with the built-in motion detection function. The image file can also be sent periodically. E-Mail (SMTP) setting menu is composed of three items, General - TP-Link TL-SC3171G | User Guide - Page 65
Notification"). ¾ SMTP server name: Type the SMTP server name up to 64 characters, or the IP address of the SMTP server. ¾ SMTP Server Port: You can set port number from 1~65535 according to your mail server. The default value is 25. ¾ Security setting: Check SSL box if the mail server you use has - TP-Link TL-SC3171G | User Guide - Page 66
name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account. z User name, Password: Type the user name and Password of the user who has the mail account. This setting is - TP-Link TL-SC3171G | User Guide - Page 67
detection by the external sensor input or by the built-in motion detection function. Select On to send the image and file to SMTP server linked with the alarm detection. ¾ Alarm sending: Select On to set to send mail with connection to the alarm detection. ¾ File attachment: Set whether an image - TP-Link TL-SC3171G | User Guide - Page 68
¾ Alarm z Motion Detection: Click it for using Motion Detection function as a sensor. You can set motion detection function on the motion detection page. 63 - TP-Link TL-SC3171G | User Guide - Page 69
) Note: 1) You can set motion detection on motion detection page (Please go to "Setting → Advance →Motion detection → Setting"). For more details, you can check Section 7.7. 2) Motion Detection works only when the MPEG4 function is On and the Cropping is set to Off. z Alarm input: Select the - TP-Link TL-SC3171G | User Guide - Page 70
7.5. 7.2.3 Periodical sending You can set to send an image file by SMTP server periodically by selecting On to send the image file by SMTP server linked with setting period. 65 - TP-Link TL-SC3171G | User Guide - Page 71
¾ Image file name: Type the file name of the image sent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score). ¾ Suffix: Select a suffix to be added to the file name sent by SMTP. z None: The name of the sent file will be the Image file name. z Date Time: The date & time suffix is - TP-Link TL-SC3171G | User Guide - Page 72
sending images to an HTTP server. By using HTTP client function, you can send the image file and audio file which has been shot and recorded linked with the built-in motion detection function to HTTP server. HTTP client setting menu is composed of two items, General and Alarm sending. 67 - TP-Link TL-SC3171G | User Guide - Page 73
should be the same as CGI. 2. The example above is for reference only. For more details, please refer to SDK in the subdirectory of the IP camera product on our website http://www.tp-link.com. 68 - TP-Link TL-SC3171G | User Guide - Page 74
function. Select On to send the image and audio file to HTTP server linked with the alarm detection. Alarm sending: Select On to set to send command in the form of Message = PTZ down. If your target device didn't support the parameter of message, you can't see the message. So you can just take the message - TP-Link TL-SC3171G | User Guide - Page 75
from your target device. For example, move=down. 9 Message: message will show up in the form of Message = PTZ down. If your target device didn't support the parameter of message, you can't see the message. So you can just take the message as a note. For example: PTZ down. 70 - TP-Link TL-SC3171G | User Guide - Page 76
, the Alarm output setting menu appears. You can set in this menu to control the alarm out of I / O port on the rear of the device linked to the alarm detection and the timer. 71 - TP-Link TL-SC3171G | User Guide - Page 77
7.4.1 Setting Alarm output: To activate the Alarm output function, select On. When you do not use the Alarm output function, select Off. ¾ Digital output: Select High signal output and Low signal output as your alarm. ¾ Trigger condition: Select the mode of the Alarm output function. You can choose - TP-Link TL-SC3171G | User Guide - Page 78
) Note: 1. You can set motion detection on motion detection page (Please go to "Setting → Advance →Motion detection → Setting"). For more details, you can check Section 7.7. 2. Motion Detection works only when the MPEG4 function is On and the Cropping is set to Off. z Alarm Input: Select the - TP-Link TL-SC3171G | User Guide - Page 79
) Note: You can set the alarm input function at alarm input page (Please go "Setting →Advance →Alarm input → Setting"). For more details, you can check Section 7.6. ¾ Alarm duration: There are up to 60 second options to choose for alarm duration interval. ¾ Effective period: Set the period when the - TP-Link TL-SC3171G | User Guide - Page 80
- Periodical z e-Mail (SMTP) -Alarm z e-Mail (SMTP) -Periodical z HTTP event -Alarm ¾ Mon (Monday) to Sun (Sunday): The time period on the right of the checked day is the effective period of the schedule. ¾ Start time/End time: Specify the Start time and the End time. ¾ Use the same time schedule - TP-Link TL-SC3171G | User Guide - Page 81
time of the other days than Mon (Monday) alarm input of I / O port on the rear of the device linked to FTP, SMTP, and HTTP sending function. 7.6.1 Setting ¾ Sensor input of the camera I / O port. z Trigger condition: Select High signal output and Low signal output as your alarm. z Camera move: Pull - TP-Link TL-SC3171G | User Guide - Page 82
to set for different detecting zones. Each one has Threshold and Sensitivity inputs which you can adjust to specific zone sequentially. Motion Detection function can support to FTP, SMTP and Alarm output for capturing and sending images or starting alarm output. 77 - TP-Link TL-SC3171G | User Guide - Page 83
the image different. The higher sensitivity it is and the more frequently it scans. The default value is 50 and the value range is 0~100. The larger the value, the The System Log function allows users to review any changes and events happened. The system begins logging automatically after started. - TP-Link TL-SC3171G | User Guide - Page 84
be shown in system log. In this case, please send the file "backup" to TP-LINK (you can save it from Setting > Basic > System > Initialize > Backup setting data), and also provide the router spec you're using, we will analyze and solve the problem as soon as possible. E-mail: [email protected] 79 - TP-Link TL-SC3171G | User Guide - Page 85
chapter provides tables that help you to optimize your IP camera with your network environment. Base on your network upload environment to choose the best Image-Quality setting. For example, if the network environment is ADSL 256Kb(upload) / 2Mb(download), the most fluent Image-Quality needs to set - TP-Link TL-SC3171G | User Guide - Page 86
320*240 512 30 550 30 320*240 512 15 600 16 160*120 1024 30 950 30 160*120 1024 15 750 16 160*120 512 30 500 30 160*120 512 15 50 16 160*120 128 30 130 30 160*120 128 15 140 16 A.3 MJPEG @ 15fps / kbps Quality Excellent Detailed Good Standard Medium 640*480 - TP-Link TL-SC3171G | User Guide - Page 87
TABLE This chapter provides tables that help you set your recording storage system. Please refer to the following table to find out the capability for recording into your hard disk. B.1 MPEG4 Storage Requirement GB / channel / day @ 30fps Quality 640*480 320*240 160*120 Excellent 10 - TP-Link TL-SC3171G | User Guide - Page 88
B.3 MPEG4 Storage Requirement GB / channel / day Image-Size Bitrate Setting Frame-Rate Setting 640*480 2048 30 640*480 2048 15 640*480 1536 30 640*480 1536 15 640*480 - TP-Link TL-SC3171G | User Guide - Page 89
/manual/jsp Q3.If the image is blurry, what can I do? Please adjust the IP Camera's focus by rotating the Lens. Q4. If I forgot the IP address and port of my IP Camera. What should I do? Please download the Intelligent IP Installer Setup from our web site, or run the CD firstly. This software
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
 |
 |
TL-SC3171G
Wireless Day/Night Surveillance Camera
REV: 1.0.1
1910010431