TP-Link TL-PA2010KIT TL-PA2010KIT V1 Quick Install Guide 7106503975
TP-Link TL-PA2010KIT Manual
 |
View all TP-Link TL-PA2010KIT manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-PA2010KIT manual content summary:
- TP-Link TL-PA2010KIT | TL-PA2010KIT V1 Quick Install Guide 7106503975 - Page 1
Quick Installation Guide AV200 Nano Powerline Adapter MODEL NO. TL-PA2010 Package Contents pair Powerline Adapter * AV200 Nano Powerline Adapter TL-PA2010 QIG Resource CD Ethernet Cable * The provided power plug may di er from the picture due to di erent regional power speci cations. Here we - TP-Link TL-PA2010KIT | TL-PA2010KIT V1 Quick Install Guide 7106503975 - Page 2
adapters. 2. Air switch may lead to failed communication among PLC devices; check whether there are air switches hindering communication. Technical Support For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide
-
1 -
2
 |
 |
Quick Installation Guide
AV200 Nano Powerline Adapter
Package Contents
Resource CD
Ethernet Cable
TL-PA2010
QIG
AV200 Nano Powerline Adapter
Warning on Final Location
Powerline Adapter
7106503975
* The provided power plug may differ from the picture due to different
regional power specifications. Here we take the EU version as an example.
*
MODEL NO.
TL-PA2010
LED and Button Descriptions
1
NOTE:
It's strongly recommended that you plug the adapter directly into the
wall socket, for some power strips have surge protector which can filter data.
Network Installation
2
To add another adapter
After taking the steps above, y
ou can surf the Internet
.
Plug an additional adapter into the wall socket, and the connection will be
established automatically within 60 seconds.
NOTE:
1.
2.
To surf the Internet, please make sure that your network is properly
connected to the Internet.
If the adapters fail to automatically link to each other, you can
establish a private group by using the pair button. To set up a private
group, please go to
Appendix Using the Pair Button
for detailed
instructions.
*
Five minutes after the device connected to the adapter is turned off, the adapter will
automatically switch to power-saving mode.
Item
Status
Description
Power LED
Powerline LED
Ethernet LED
Solid
Solid
Solid
Blinking
Blinking
Blinking
Off
Off
Off
The adapter is on.
The adapter is off.
The adapter is in power-saving mode or in pairing
procedure.
The adapter is connected to a powerline network.
The adapter is transferring data.
The adapter isn’t connected to any powerline network
or is in power-saving mode. *
The Ethernet port is connected, but there is no data
being transferred.
The Ethernet port is transferring data.
The Ethernet port isn’t connected.
Item
Pair Button
Description
Pair button is used to secure a powerline network. To secure
your network, please refer to
Appendix: Using the Pair Button
.
Power LED
Powerline LED
Pair Button
Ethernet LED
pair
200Mbps
Wall Socket
Wall Socket
200Mbps