TP-Link RE350 RE350UN V1 Quick Install Guide

Quick

Installation Guide

RE350

©2016 TP-LINK

7106506258

REV1.0.1

Applicable Model:

LED Explanation

Button Explanation

2.4GHz/5GHz

On:

The extender is connected to the

2.4GHz/5GHz wireless network of your host

network.

Off:

No connection.

POWER

On:

The extender is on.

Blinking:

The extender is initializing.

Off:

The extender is off.

Solid blue:


router, and is in a good location.

Solid red:


router, but is too far away from the router.

Blinking:

WPS connection is in process.

Off:

No active connection.

(WPS)

Power button

:

To turn on or off the extender, press the Power button.

LED button

:

To turn all LEDs on or off, press the LED button.

or

Connect to the extender

Power on

Configure

Both extended networks share the same Wi-Fi passwords as those of your host networks,

but may have different SSIDs (network names) if you have customized them during the configuration.

Enjoy!

Relocate

Using a Web Browser

Method ONE

If your router does not support 5GHz wireless

network, please click

Skip

to continue.

Select your router's 2.4GHz or 5GHz host

network and enter the password, then click

Next

.

http://tplinkrepeater.net

admin

admin

Login

Launch a web browser and type

http://tplinkrepeater.net

in the address

field. Use

admin

(all lowercase) for both

Username and Password to log in.

If the log in window does not pop up,

please refer to the

FAQ > Q1

.

3

4

5

Create a new username and password for

log in the web management page, then

click

Confirm

.

You can customize the Extended 2.4GHz

and 5GHz SSIDs or keep the host network

SSIDs (default), then click

Next

.

1

2

Next

Please select 2.4GHz Host network or skip this network.

SSID

ID

Signal

MAC Address

Security

Your router network name

30:B5:C1:33:99:76

Host 2.4GHz Password:

TP-LINK_123456

23:B5:C0:30:90:06

Exit

Other...

Rescan

Skip

2.4GHz Host Network

5GHz Host Network

Wireless Settings

Summary

12345678

1

2

Extended 2.4GHz SSID:

Your network name

Copy Host SSID

Hide SSID broadcast

Note: The extended 2.4GHz password is the same as your Host password.

Extended 5GHz SSID:

Your network name_5G

Copy Host SSID

Hide SSID broadcast

Note: The extended 5GHz password is the same as your Host password.

Back

Next

2.4GHz Host Network

5GHz Host Network

Wireless Settings

Summary

Plug the extender into an electrical

outlet near your router.

Verify your wireless settings and click

Finish

.

The corresponding LEDs (

/

)

should turn solid on.

1. Unplug the Ethernet cable

from your computer (if any).

2. Click the

Wireless

Network Connection

icon

on your taskbar.

3. Click the

refresh

icon

and connect to the

extender’s network:

TP-LINK_Extender_2.4GHz

or _5GHz

.

Connections are available

Not connected

Wireless Network Connection

Connect automatically

Connect


√

Wait until the Power LED

changes to solid blue.

Red

Too far away

Blue

Ideal location

Extended Network

Host Network

Host Router

Extender

Clients

Plug the extender into an electrical outlet between your router

(Host Network) and the Wi-Fi “dead” zone. The location you

choose must be within the range of your existing host network.

Wait until the

LED is lit and solid blue. If not, relocate it closer

to the router to achieve a good (or better) signal quality.

1

2

1. Unplug the Ethernet cable from your computer (if any).

2. Click the Wi-Fi icon in the top right corner of the

screen, and connect to the extender’s network:

TP-LINK_Extender_2.4GHz or _5GHz

.

For Mac OS X Users

Wi-Fi: On

Turn Wi-Fi Off

TP-LINK_Router

Join Other Network...

Create Network...

Open Network Preferences...


For Windows Users

TP-Link RE350 RE350UN V1 Quick Install Guide

TP-Link RE350 Manual

TP-Link RE350 manual content summary: