TP-Link RE210 RE210(EU) V1 UG

TP-Link RE210 Manual

TP-Link RE210 manual content summary:

  • TP-Link RE210 | RE210(EU) V1 UG - Page 1
    RE210 AC750 WiFi Range Extender REV1.0.0 1910011140
  • TP-Link RE210 | RE210(EU) V1 UG - Page 2
    COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced
  • TP-Link RE210 | RE210(EU) V1 UG - Page 3
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • TP-Link RE210 | RE210(EU) V1 UG - Page 4
    Italy Luxembourg None None If used outside of own premises, general authorization is required General authorization required for network and service supply(not for spectrum) Norway Implemented Russian Federation None This subsection does not apply for the geographical area within a radius
  • TP-Link RE210 | RE210(EU) V1 UG - Page 5
    This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Classe B respecte
  • TP-Link RE210 | RE210(EU) V1 UG - Page 6
    power source.  Don't disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us.  Avoid water and wet locations. This product can be used in the following countries: AT BG BY CA CZ DE DK EE
  • TP-Link RE210 | RE210(EU) V1 UG - Page 7
    TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AC750 WiFi Range Extender Model No.: RE210 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the
  • TP-Link RE210 | RE210(EU) V1 UG - Page 8
    LED On/Off...22 4.6 System Tools 23 4.6.1 Firmware Upgrade 23 4.6.2 Factory Defaults 24 4.6.3 Backup & Restore 24 4.6.4 Reboot ...25 4.6.5 Password ...26 4.6.6 System Log ...26 Appendix A: Factory Defaults 28 Appendix B: Troubleshooting 29 Appendix C: Specifications 31 Appendix D: Glossary
  • TP-Link RE210 | RE210(EU) V1 UG - Page 9
    RE210 AC750 WiFi Range Extender User Guide Package Contents The following items should be found in your package:  RE210 AC750 WiFi Range Extender  Ethernet Cable  Quick Installation Guide  Resource CD for RE210 AC750 WiFi Range Extender, including:  This User Guide  Note: Make sure that the
  • TP-Link RE210 | RE210(EU) V1 UG - Page 10
    this Guide to get the full information of the RE210 AC750 WiFi Range Extender. 1.2 Main Features  Complies with IEEE 802.11ac  Provides multiple encryption security Types including: 64/128/152-bit WEP and WPA-PSK/WPA2-PSK  Supports Built-in DHCP server  Supports Firmware Upgrade  Supports Web
  • TP-Link RE210 | RE210(EU) V1 UG - Page 11
    RE210 AC750 WiFi Range Extender User Guide  LED Explanation: Name Status Indication Flashing green The Range Extender is establishing a secure connection or being configured via web page. Solid green The Range Extender has established a secure connection, and the signal strength is adequate.
  • TP-Link RE210 | RE210(EU) V1 UG - Page 12
    RE210 AC750 WiFi Range Extender User Guide Chapter 2 Hardware Installation 2.1 Before You Begin Please read this User Guide carefully before installing and using the equipment. The operating distance range of your wireless connection can vary significantly depending on the physical position of the
  • TP-Link RE210 | RE210(EU) V1 UG - Page 13
    RE210 AC750 WiFi Range Extender User Guide  Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0 or above.  Operating temperature of the Range Extender should be 0℃~40℃ (32℉~104℉).  Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing).
  • TP-Link RE210 | RE210(EU) V1 UG - Page 14
    RE210 AC750 WiFi Range Extender User Guide Chapter 3 Quick Installation Guide This chapter will guide you to configure your PC to communicate with the Range Extender and to configure and manage the RE210 AC750 WiFi Range Extender easily with a Web-based utility. With a Web-based utility, it is easy
  • TP-Link RE210 | RE210(EU) V1 UG - Page 15
    RE210 AC750 WiFi Range Extender User Guide 2. After successful login, there will pop up the Quick Setup Wizard page. Click Next to get the quick setup started.  Note: Figure 3-3 Quick Setup Start If you want to go through the Quick Setup right away, you can click Exit and enter the main menu of
  • TP-Link RE210 | RE210(EU) V1 UG - Page 16
    RE210 AC750 WiFi Range Extender User Guide 5. A list of available 2.4GHz wireless network will appear. Check the box before the SSID of your desired network, and then click Next. Figure 3-6 Quick Setup - Available Wireless Networks  Note: 1. If you could not find your wireless network name (SSID)
  • TP-Link RE210 | RE210(EU) V1 UG - Page 17
    RE210 AC750 WiFi Range Extender User Guide 7. A list of available 5GHz wireless network will appear. Check the box before the SSID of your desired network, and then click Next. Figure 3-8 Quick Setup - Available Wireless Networks  Note: 1. If you could not find your wireless network name (SSID) in
  • TP-Link RE210 | RE210(EU) V1 UG - Page 18
    RE210 AC750 WiFi Range Extender User Guide 9. Double-check your wireless setting and network setting, when Figure 3-10 appears. If verified, click Finish to complete the Quick Setup. If there is anything wrong, click Back to return to the previous pages and reconfigure it.  Note: Figure 3-10
  • TP-Link RE210 | RE210(EU) V1 UG - Page 19
    RE210 AC750 WiFi Range Extender User Guide Chapter 4 Configure the Device This Chapter describes how to configure your Range Extender via the web-based management page. The RE210 AC750 WiFi Range Extender is easy to configure and manage with the Web-based (Internet Explorer, Netscape® Navigator,
  • TP-Link RE210 | RE210(EU) V1 UG - Page 20
    RE210 AC750 WiFi Range Extender User Guide Figure 4-1 Status  Firmware Version - This field displays the current firmware version of the Range Extender.  Hardware Version - This field displays the current hardware version of the Range Extender.  Connection Status to Existing Network (2.4GHz or
  • TP-Link RE210 | RE210(EU) V1 UG - Page 21
    RE210 AC750 WiFi Range Extender User Guide  Connection Status - It shows whether your device has been connected to a wireless network currently. "Connected" means the range extender have connected to a wireless network, while if it shows "disconnected", you can click "connect" to connect.  Range
  • TP-Link RE210 | RE210(EU) V1 UG - Page 22
    RE210 AC750 WiFi Range Extender User Guide 4.3.1 LAN Selecting Network > LAN will enable you to configure the IP parameters of Network on this page. Figure 4-3 LAN - Dynamic IP Figure 4-4 LAN - Static IP  MAC Address - The physical address of the LAN port, as seen from the LAN. The value cannot be
  • TP-Link RE210 | RE210(EU) V1 UG - Page 23
    RE210 AC750 WiFi Range Extender User Guide 2. If you are not familiar with the setting items in this page, it's strongly recommended to keep the provided default values, otherwise may result in lower wireless network performance or even can't work. 3. If you choose Static IP, the domain name log in
  • TP-Link RE210 | RE210(EU) V1 UG - Page 24
    RE210 AC750 WiFi Range Extender User Guide Figure 4-7 DHCP Settings - Off  DHCP Server - Selecting the radio button before Auto/On/Off will disable/enable the DHCP server on your Range Extender. The default setting is Auto. If you disable the Server, you must have another DHCP server within your
  • TP-Link RE210 | RE210(EU) V1 UG - Page 25
    RE210 AC750 WiFi Range Extender User Guide 4.3.3 DHCP Client List Selecting Network > DHCP Client List will enable you to view the Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the device (Figure 4-8). Figure 4-8 DHCP Clients List  ID - Here displays the
  • TP-Link RE210 | RE210(EU) V1 UG - Page 26
    RE210 AC750 WiFi Range Extender User Guide get a connection to the internet (show in Figure 4-10). Figure 4-10 Connect to Existing Network Click the Next button to continue, for detailed steps, please refer to Chapter 3 Quick Installation Guide . Click the Exit button to quit. 4.4.2 Extender
  • TP-Link RE210 | RE210(EU) V1 UG - Page 27
    RE210 AC750 WiFi Range Extender User Guide Figure 4-12 Wireless MAC Filtering To filter wireless users by MAC Address, click Enable. The default entry To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The
  • TP-Link RE210 | RE210(EU) V1 UG - Page 28
    RE210 AC750 WiFi Range Extender User Guide Click the Delete All button to delete all entries function. 2. Select the radio button "Allow the stations specified by any enabled entries in the list to access" for Filtering Rules. 3. Delete all or disable all entries if there are any entries already. 4.
  • TP-Link RE210 | RE210(EU) V1 UG - Page 29
    RE210 AC750 WiFi Range Extender User Guide  Beacon Interval - Specifies a value between 40-1000 milliseconds. The beacons are the packets sent by the device to synchronize a wireless network. Beacon Interval value determines the time interval of the beacons. The default value is 100.  RTS
  • TP-Link RE210 | RE210(EU) V1 UG - Page 30
    RE210 AC750 WiFi Range Extender User Guide Figure 4-16 Wireless Statistics  MAC Address - Shows the connected wireless On/Off The LED On/Off option will allow you to turn on or off the LED status of your Range Extender (shown in Figure 4-17). Figure 4-17 LED On/Off  LED Status - Shows if the LED
  • TP-Link RE210 | RE210(EU) V1 UG - Page 31
    RE210 AC750 WiFi Range Extender User Guide 4.6 System Tools System Tools option helps you to optimize the configuration of your device. You can upgrade the Range Extender to the latest version of firmware as well as backup or restore the Range Extender's configuration files. It's suggested that you
  • TP-Link RE210 | RE210(EU) V1 UG - Page 32
    RE210 AC750 WiFi Range Extender User Guide 1. Download a more recent firmware upgrade file from the TP-LINK website (http://www.tp-link.com). 2. Enter the path name or click Browse... to select the downloaded file on the computer into the File blank. 3. Click Upgrade.  Note: Do not
  • TP-Link RE210 | RE210(EU) V1 UG - Page 33
    RE210 AC750 WiFi Range Extender User Guide To restore the device's configuration, follow these instructions , which include: • Change LAN IP Address (System will reboot automatically). firmware of the device (system will reboot automatically). • Restore the device's settings to factory defaults
  • TP-Link RE210 | RE210(EU) V1 UG - Page 34
    RE210 AC750 WiFi Range Extender User Guide 4.6.5 Password Selecting System Tools > Password allows you to change the factory default user name and password of the device on the screen shown in Figure 4-23. Figure 4-23 Password It is strongly recommended that you change the factory default user name
  • TP-Link RE210 | RE210(EU) V1 UG - Page 35
    RE210 AC750 WiFi Range Extender User Guide  Log Type - By selecting the log type, only logs of this type the logs in a txt file. Click the Mail Log button to send an email of current logs manually according to the address and validation information set in Mail Settings. The result will be shown in
  • TP-Link RE210 | RE210(EU) V1 UG - Page 36
    RE210 AC750 WiFi Range Extender User Guide Appendix A: Factory Defaults Item Common Default Settings Username Password IP Address Subnet Mask Domain Wireless SSID Wireless Security Wireless MAC Address Filtering Default Value admin admin 192.168.0.254 255.255.255.0 http://tplinkrepeater.net TP-
  • TP-Link RE210 | RE210(EU) V1 UG - Page 37
    RE210 AC750 WiFi Range Extender User Guide Appendix B: Troubleshooting T1. How do I restore my Range Extender's configuration to its factory default settings? There are TWO methods available to restore the factory defaults. Method 1: With the Range Extender RE210 powered on, press the Reset button
  • TP-Link RE210 | RE210(EU) V1 UG - Page 38
    RE210 AC750 WiFi Range Extender User Guide 2) Try to obtain an IP address and gateway; if succeed, open your web-browser, enter the default domain http://tplinkrepeater.net in the address field and get logged in. If you are unable to log in, please Reset the device, and then use the default IP
  • TP-Link RE210 | RE210(EU) V1 UG - Page 39
    RE210 AC750 WiFi Range Extender User Guide Appendix C: Specifications General Standards and Protocols IEEE 802.3, 802.3u, 802.11ac, 802.11n, 802.11b and 802.11g, TCP/IP, DHCP Safety & Emission CE Ports One 10/100/1000M Auto-Negotiation LAN RJ45 port Wireless Frequency Band 2.4GHz & 5GHz
  • TP-Link RE210 | RE210(EU) V1 UG - Page 40
    security.  Access Point (Range Extender) - A wireless LAN transceiver or "base station" that can connect a wired LAN to one or many wireless devices. Access points can also bridge to each other.  DNS (Domain Name System) - An Internet Service that translates the names of websites into IP addresses
  • TP-Link RE210 | RE210(EU) V1 UG - Page 41
    RE210 AC750 WiFi Range Extender User Guide  Wi- in a local area.  WPA (Wi-Fi Protected Access) - WPA is a security technology for wireless networks that the benefit of easier administration and use. This is similar to 802.1x support and requires a RADIUS server in order to implement. The Wi-Fi
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41

RE210
AC750 WiFi Range Extender
REV1.0.0
1910011140