TP-Link MC210CS MC200CM User Guide
TP-Link MC210CS Manual
 |
UPC - 845973030445
View all TP-Link MC210CS manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link MC210CS manual content summary:
- TP-Link MC210CS | MC200CM User Guide - Page 1
User Guide MC200CM MC210CS MC220L Gigabit Ethernet Media Converter - TP-Link MC210CS | MC200CM User Guide - Page 2
respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2011 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved - TP-Link MC210CS | MC200CM User Guide - Page 3
1 2. Features 2 3. Appearance Indication 3 3.1 LED Indicators 3 3.2 Switch 4 4. Installation Guides 5 4.1 Gigabit Ethernet Media Converter 5 4.2 Configuration 7 4.3 Installation Procedure 8 4.4 Install Media Converter into MC1400 9 5. Troubleshooting 10 6. Appendix: Specifications 11 i - TP-Link MC210CS | MC200CM User Guide - Page 4
have is what you ordered. The Converter includes: ¾ One Converter ¾ One AC-DC Power Adapter (DC9V/600mA) ¾ One User Guide 1. Introduction MC200CM, MC210CS and MC220L are Gigabit Ethernet Media Converters. The FX port of MC220L supports hot-swappable. The converter mediates between a 1000Base-TX - TP-Link MC210CS | MC200CM User Guide - Page 5
for TX port. ¾ Extend fiber distance up to 0.55km for multi-mode fiber and 15km for single-mode fiber. Please check the table in page 3 for the accurate transmission distance of each model. ¾ Easy-to-view LED indicators provide status to monitor network activity easily. ¾ External power supply. 2 - TP-Link MC210CS | MC200CM User Guide - Page 6
hot-swappable(only for MC220L). Connectors and Network Cables Supported The connectors and network cables supported by the converter are listed as follows. ¾ Connectors: RJ-45, SC, LC. ¾ Network Cables: Cat.5 Twisted-Pair(below abbreviated as TP), 9/125um Single-mode fiber, 62.5/125,50/125um - TP-Link MC210CS | MC200CM User Guide - Page 7
a valid link for TP Port. There's no valid link for TP Port. The converter is receiving data from TP port. The converter is not receiving data from TP port. Note: The TP port mentioned in this User Guide Manual stands for the TX port without any explanations. 3.2 Switch Force AUTO ¾ FORCE: The - TP-Link MC210CS | MC200CM User Guide - Page 8
as TL- SL2210WEB or TL-SL2428WEB, the converter must be set to Auto- Negotiation mode. We suggest leaving the switches on AUTO. Please reset the converter after configuring the switches. Then the change would take effect. 4. Installation Guides 4.1 Gigabit Ethernet Media Converter: ¾ The SC fiber - TP-Link MC210CS | MC200CM User Guide - Page 9
Note: Either two MC200CM or two MC210CS could cooperate. MC220L can be plugged in with two kinds of SFP modules, single-mode or multi-mode. Plug the SFP module into MC220L Transmits and receives data between two MC220L Note: Two MC220L with the same SFP module could cooperate. 6 - TP-Link MC210CS | MC200CM User Guide - Page 10
fiber. Model No. MC220L connect with MC200CM MC210CS Transmission Media SFP module 850nm, Multi-mode 1310nm, Single-mode 4.2 Configuration In order to achieve the aim of effectively expanding a Gigabit Ethernet network, please take the following examples for reference: 1. Place two converters - TP-Link MC210CS | MC200CM User Guide - Page 11
connection between 2 Media Converters, please refer to connection diagram in 4.1 ---- two MC200CM, two MC210CS, two MC220L or one MC220L with another MC200CM/MC210CS. 2. Another effective application is to place one converter directly between a 1000Base-TX network and a fiber optic (FX) device - TP-Link MC210CS | MC200CM User Guide - Page 12
2. Connection of two Converters or a Converter and a 1000Base- FX Device: Use a SC fiber cable to connect the two Converters' SC connectors or the SC connecters of a Converter and a 1000Base-FX Device. 3. Turn on the power. 4.4 Install Media Converter into MC1400 Tweak out the two screws located on - TP-Link MC210CS | MC200CM User Guide - Page 13
power lead is connected correctly or not. 2. LINK LED (TP port) is off: Please confirm that there is no open circuit with cable and make sure that the connection type of the device is 1000M. 3. LINK LED (FX port) is off: 1) Check the fiber mode and fiber type to make sure that they match the Gigabit - TP-Link MC210CS | MC200CM User Guide - Page 14
6. Appendix: Specifications Standards and Protocols Media Interface Max. Distance Power Temperature Humidity MC200CM IEEE802.3ab, IEEE 802.3z, IEEE 802.3x SC, RJ45 Cat.5: 100m Multi-mode Fiber: 0.55km External Power Adapter Operation: 0℃~40℃ Storage: -40℃~70℃ Operation: 10%~90% non-condensing - TP-Link MC210CS | MC200CM User Guide - Page 15
Standards and Protocols Media Interface Max. Distance Power Temperature Humidity MC220L IEEE802.3ab, IEEE 802.3z, IEEE 802.3x LC, RJ45 Cat.5: 100m Multi/Single-mode Fiber: 0.55km/10km External Power Adapter Operation: 0℃~40℃ Storage: -40℃~70℃ Operation: 10%~90% non-condensing Storage: 5%~90% non- - TP-Link MC210CS | MC200CM User Guide - Page 16
7106503685
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
User Guide
MC200CM
MC210CS
MC220L
Gigabit Ethernet Media Converter