TP-Link Archer VR600v Archer VR600vEU V2 Quick Installation Guide
TP-Link Archer VR600v Manual
View all TP-Link Archer VR600v manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer VR600v manual content summary:
- TP-Link Archer VR600v | Archer VR600vEU V2 Quick Installation Guide - Page 1
LINE LINE Quick Installation Guide AC1600 Wireless Gigabit VoIP VDSL/ADSL Modem Router VR600v Package Content Power On/Off Reset WPS WLAN DECT Modem Router Antenna PHONE MODEM DSL Splitter RJ11 Cable Ethernet Cable Power Adapter 1. Set up the Modem Router Power Adapter 1 Attach the - TP-Link Archer VR600v | Archer VR600vEU V2 Quick Installation Guide - Page 2
this guide to reconfigure the modem router. A4. Contact your ISP (internet service provider) to check the status of your DSL line. A5. If the problem persists, contact our Technical Support. Q4. What should I do if I forget my password? For the web management page: A1. If you are using a TP-Link ID
Quick Installation Guide
1. Set up the Modem Router
AC1600 Wireless Gigabit VoIP VDSL/ADSL Modem Router
VR600v
2. Connect the Phone
Open the registration page on your cordless phone. Press and hold the DECT
button on the modem router for about 3 seconds until the Phone LED
flashes.
A
B
Enter the PIN (Default: 0000) on the cordless phone if required.
Analog Phone
DECT Cordless Phone
DECT
Connect your analog phones to
RJ11 ports on the modem router's back
panel. You may connect up to two.
Flashing
RJ-11
DECT
Within 1 minute
Press for about 3 seconds
Ethernet Cable
Package Content
Antenna
Power Adapter
Modem Router
RJ11 Cable
DSL
Phone2
Phone1
Modem Router
Connect the modem router
to the DSL splitter.
For traditional landline phone service
Power Adapter
2
Connect the DSL splitter
to the phone jack.
1
DSL Splitter
Phone Jack
PHONE
MODEM
LINE
Push in to turn on the
modem router.
1
3
Attach the antennas.
DSL Splitter
PHONE
MODEM
LINE