TP-Link Archer TX3000E Archer TX3000EUN V1 Quick Installation Guide
TP-Link Archer TX3000E Manual
 |
View all TP-Link Archer TX3000E manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer TX3000E manual content summary:
- TP-Link Archer TX3000E | Archer TX3000EUN V1 Quick Installation Guide - Page 1
d. Locate an available F_USB connector and carefully plug the Bluetooth USB cable into it. Note: If the Bluetooth USB cable is not correctly connected to the motherboard, Bluetooth function won't work even after driver installation. Adapter Bluetooth USB cable USB USB To continue, flip the page - TP-Link Archer TX3000E | Archer TX3000EUN V1 Quick Installation Guide - Page 2
driver at https://www.tp-link.com/support/download/ b. Install the Wi-Fi and Bluetooth drivers. ① Wi-Fi: Click and follow the onscreen instructions to complete the Wi-Fi installation. ② Bluetooth: Click and follow the onscreen instructions to complete the Bluetooth installation. Wi-Fi Bluetooth
-
1 -
2
 |
 |
Note:
If the bracket is not suitable for your computer, detach it from
the adapter's board and replace it with the low-profile bracket.
Note:
If the Bluetooth USB cable is not correctly connected to the
motherboard, Bluetooth function won’t work even after driver
installation.
1
Connect to a Computer
a.
Turn off your computer, unplug the power
cable then remove the case panel.
c.
Locate an available
PCIE X1
slot and carefully
insert the adapter.
d.
Locate an available
F_USB
connector and
carefully plug the Bluetooth USB cable into it.
b.
Connect the provided Bluetooth USB cable to
the adapter.
WLAN Bluetooth
PCI Express Adapter
Quick Installation Guide
Images may differ from your actual product.
To continue, flip the page over.
USB
Bluetooth USB cable
Adapter
USB