TP-Link Archer C80 Archer C80US V1 Quick Installation Guide

Flip the page over to complete network setup.

If your internet comes from an Ethernet outlet, connect the router’s

WAN

port to it, then follow Step 4 and Step 5.

If you want to configure this new router as an access point to extend your network, refer to the

Access Point Mode

section on the back page.

Connect the Hardware

Modem

Power adapter

Power adapter

Router

Connect the power adapter to

the router and turn it on.

Note:

If the 2.4 GHz LED and 5 GHz LED are off, press and hold the

WPS/Wi-Fi button on the back for more than 5 seconds. Both the LEDs

should turn solid.

Check for the following LEDs to confirm the

hardware connection, then refer to the next

section to set up the internet.

Power on the modem, and

then wait about

2 minutes

for it to restart.

Unplug your modem,

and remove

the backup battery if it has one.

Connect the

powered-off

modem

to the router’s

WAN

port with an

Ethernet cable.

* Images may differ from actual products.

Quick Installation Guide

AC1900 MU-MIMO Wi-Fi Router

WAN

WAN

POWER

POWER

Power

On

Internet

On

2.4GHz

On

5GHz

On

On / Off