TP-Link Archer C6 Archer C6US V2 Quick Installation Guide

Quick Installation Guide

Wireless Dual Band Router

* Images may differ from actual products.

If your internet comes from an Ethernet outlet, connect the router’s

Internet

port to it, then follow Step 4 and Step 5.

If you want to configure this new router as an access point to extend your network, refer to the

Access Point Mode

section on the back page.

Connect the Hardware

Flip the page over to complete network setup.

Connect the power adapter to

the router and turn it on.

Note:

If the 2.4 GHz LED and 5 GHz LED are off, press and hold the

WPS/Wi-Fi On/Off button on the back for more than 3 seconds. Both the

LEDs should turn on.

Power

On

Internet

On

2.4 GHz

On

5 GHz

On

Check for the following LEDs to confirm the

hardware connection, then refer to the next

section to set up the internet.

Modem

Power adapter

Router

Unplug your modem,

and remove

the backup battery if it has one.

Connect the

powered-off

modem

to the router’s

Internet

port with an

Ethernet cable.

Power on the modem, and

then wait about

2 minutes

for it to restart.

Internet

Power

Power adapter

Power On / Off

Set up with videos:

Scan the QR code or visit

to search for the setup video of your product.