TP-Link Archer C2 Archer C2 V1 Quick Install Guide
TP-Link Archer C2 Manual
 |
View all TP-Link Archer C2 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer C2 manual content summary:
- TP-Link Archer C2 | Archer C2 V1 Quick Install Guide - Page 1
Quick Installation Guide AC750 Wireless Dual Band Gigabit Router 7106505275 REV3.0.0 Connecting the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router's Internet port, - TP-Link Archer C2 | Archer C2 V1 Quick Install Guide - Page 2
then follow the instruction on screen to complete the initial setup. Quick Setup-WAN Connection Type router. A Insert the TP-LINK Resource CD into the CD-ROM drive. B Select Archer C2 and click Easy Setup your Internet Service Provider. A2. Log in to the Web Management page of the router, and go
-
1 -
2
 |
 |
Modem
Power adapter
Power adapter
Router
Turn on the router.
4
1
3
2
Internet
Quick Installation Guide
AC750 Wireless Dual Band Gigabit Router
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, then follow steps 4 and 5 to
complete the hardware connection.
7106505275
REV3.0.0
Verify that the hardware
connection is correct by
checking these LEDs.
5
Power
On
Note: If the 2.4G
/
5G LED
is off,
please press the Wireless button on
the rear panel for 2 seconds, then
check the LEDs again in a few seconds.
Connecting the Hardware
2.4G/5G
On
On
Internet
Turn on the modem and
then wait about
2 minutes
for it to restart.
Connect the modem to the
Internet port on your router
with an Ethernet cable.
Turn off the modem,
and remove the backup
battery if it has one.