TP-Link Archer C1200 Archer C1200EU V1 Quick Install Guide
TP-Link Archer C1200 Manual
 |
View all TP-Link Archer C1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer C1200 manual content summary:
- TP-Link Archer C1200 | Archer C1200EU V1 Quick Install Guide - Page 1
Quick Installation Guide AC1200 Wireless Dual Band Gigabit Router Connect the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router's Internet port, and then follow Step 4 - TP-Link Archer C1200 | Archer C1200EU V1 Quick Install Guide - Page 2
Type, please click Auto Detect. Moreover, the TP-LINK router is equipped with various features, such as Guest Network, Parental Controls, Access Control, etc. For details, please refer to the User Manual at www.tp-link.com. Tether App TP-LINK Tether app provides a simple, intuitive way to
-
1 -
2
 |
 |
Quick Installation Guide
AC1200 Wireless Dual Band Gigabit Router
Connect the Hardware
Modem
Power adapter
Power adapter
Router
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, and then follow Step 4 and 5 to
complete the hardware connection.
Turn off the modem, and remove
the backup battery if it has one.
1
2
Connect the modem to the Internet
port on your router with an Ethernet cable.
Turn on the modem, and then
wait about
2 minutes
for it to restart.
3
Verify that the following LEDs are on
and solid before continuing with the
configuration.
5
Power
On
On
Internet
2.4G
On
5G
On
Note: If the 2.4G LED
and 5G LED
are off, please
press the WPS/Wi-Fi On/Off button for 2 seconds and
check the LEDs again in a few seconds later.
For optimum performance,
orient the antennas as
shown in the drawing.
Internet
Turn on the router.
4