TP-Link Archer AX73 Archer AX73UN V1 User Guide

TP-Link Archer AX73 Manual

Get TP-Link Archer AX73 PDF manuals and user guides View all TP-Link Archer AX73 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link Archer AX73 manual content summary:

  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 1
    User Guide AX5400 Wi-Fi 6 Router Archer AX73 © 2020 TP-Link 1910012856 REV1.0.0
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 2
    Setup Wizard 14 4. 2. Quick Setup Via TP-Link Tether App 14 4. 3. Manually Set Up Your Internet Connection 15 4. 4. Set Up the Router as an Access Point 18 4. 5. Set Up an IPv6 Internet Connection 18 Chapter 5. TP-Link Cloud Service 22 5. 1. Register a TP-Link ID 23 5. 2. Change Your TP-Link
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 3
    6. 3. 2.Connect via the Router's PIN 31 6. 3. 3.Push the WPS Button 31 6. 4. Advanced Wireless Settings 32 Chapter 7. Guest Network 34 7. 1. Create a Network for Guests 35 7. 2. Customize Guest Network Options 36
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 4
    Change the LAN Settings 77 14. 2. Configure to Support IPTV Service 77 14. 3. Specify DHCP Server Settings 79 14. 4. Set Up a Dynamic DNS Service Account 80 14. 5. Create Static Routes 81 Chapter 15. Manage the Router 84 15. 1. Upgrade the Firmware 85 15. 1. 1.Auto Update 85 15. 1. 2.Online
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 5
    found at Download Center at https://www.tp-link.com/support/download/. The Quick Installation Guide can be found where you find this guide or inside the package of the router. Specifications can be found on the product page at https://www.tp-link.com. TP-Link Community is provided for you to discuss
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 6
    as a result of network conditions, client limitations, and environmental factors. *Use of WPA3 requires clients to also support the corresponding feature. *This router may not support all the mandatory features as ratified in Draft 3.0 of IEEE 802.11ax specification. *Further software upgrades for
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 7
    Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections: • Product Overview • Appearance
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 8
    About Your Router 1. 1. Product Overview TP-Link AX router, with next-generation 802.11ax Wi-Fi Technology, achieves WiFi performance at up successfully. The system is starting up or the firmware is being upgraded. Do not disconnect or power off your router. Power is off. The 2.4 GHz wireless band
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 9
    band is enabled. Off The 5 GHz wireless band is disabled. Green On Internet service is available. Orange On The router's Internet port is connected, but the internet service is not available. Off The router's Internet port is unplugged. On At least one powered-on device is connected to
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 10
    Port Description Press this WPS button, and immediately press the WPS button on your client device to start the WPS process. The LED of the router should change from blinking to solid on, indicating successful WPS connection. Press and hold the Wi-Fi button for more than 2 seconds to turn on
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 11
    Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Router • Connect Your Router
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 12
    need around 5mm based, and the length of the screw need to be at least 20mm to withstand the weight of the product. 2. 2. Connect Your Router Before you start: 1 ) Turn off your modem, if any, and remove the backup battery if it has one. 2 ) Place the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 13
    Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your Connection Wi-Fi TP-Link_XXXX TP-Link_XXXX_5G CHOOSE A NETWORK... OR TP-Link_XXXX Connect automatically Connect
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 14
    to your router through this method. Note: • WPS is not supported by iOS devices. • The WPS function cannot be configured if the wireless function of the router is disabled. two minutes, press the WPS button on your router. WLAN On TP-Link MyHome David HomeNetwork TP-Link_Home TP-Link_Router Test 10
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 15
    Chapter 3 Log In to Your Router
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 16
    Mozilla Firefox or Apple Safari. Follow the steps below to log in to your router. 1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode the FAQ Section. • If you have registered a TP-Link ID and bound your cloud router to it, the login password you created here will be invalid. Please
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 17
    , you can also set up an IPv6 connection if your ISP provides IPv6 service. It contains the following sections: • Use Quick Setup Wizard • Quick Setup Via TP-Link Tether App • Manually Set Up Your Internet Connection • Set Up the Router as an Access Point • Set Up an IPv6 Internet Connection
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 18
    go to Advanced > Quick Setup for configuration to connect your router to the internet. Then follow the step-by-step instructions to connect your router to the internet. 3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS, and more.), log in with your TP-Link ID or click
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 19
    don't have a TP-Link ID, create one first. 3. Tap the + button and select Router > Wireless Router. Follow the steps to complete the setup and connect to the internet. 4. Connect your devices to the newly configured wireless networks of the router and enjoy the internet! 4. 3. Manually Set Up Your
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 20
    Chapter 4 Set Up Internet Connection 2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields. 3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable modems. 16
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 21
    page, please go to Advanced > Network > Internet to complete the configuration. • If you still cannot access the internet, refer to the FAQ section for further instructions. 17
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 22
    network to a wireless one. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Operation Mode, select Access Point and click Save. The router will reboot and switch to Access Point mode. 3. After rebooting, connect the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 23
    ) Dynamic IP(SLAAC/DHCPv6): Click Advanced to input further information if your ISP requires. Click Save and then click Renew. 3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6 server. Click Advanced to input further information if your ISP requires. Click Save and then
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 24
    the username and password for the IPv6 connection. 4 ) 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type (Manually Set Up Your Internet Connection). Click Advanced to input further information if your ISP requires. Click Save and then click Connect. 5 ) Pass
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 25
    Chapter 4 Set Up Internet Connection 5. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by your ISP, and click Save. 6. Click Status to check whether you have successfully set up an IPv6 connection. Tips: Visit the FAQ section
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 26
    Cloud will notify you when an important firmware upgrade is available. Surely you can also manage multiple TP-Link Cloud devices with a single TP-Link ID. This chapter introduces how to register a new TP-Link ID, bind or unbind TP-Link IDs to manage your router, and the Tether app with which you
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 27
    Quick Setup process, you can: 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > TP-Link ID or click TP-Link ID on the very top of the page. 3. Click Sign Up and follow the instructions to register a TP-Link ID. 4. After activating your TP-Link
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 28
    Chapter 5 TP-Link Cloud Service • To change your password: 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save. 5. 3. Manage the User TP-Link IDs The TP-Link ID used to log in to the router for the first time will be automatically bound as the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 29
    Chapter 5 TP-Link Cloud Service from the same router as Users. All accounts can monitor and manage the router locally or remotely, but user accounts cannot: • Reset the router to its factory default settings either on the web management page or in the Tether app. • Add/remove other TP-Link IDs to/
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 30
    Chapter 5 TP-Link Cloud Service 5. 4. Manage the Router via the TP-Link Tether App The Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the Apple App Store or Google Play store and search "TP-Link Tether" or simply scan the QR code to download and install the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 31
    Chapter 6 Wireless Settings This chapter guides you on how to configure the wireless settings. It contains the following sections: • Specify Wireless Settings • Schedule Your Wireless Function • Use WPS for Wireless Connection • Advanced Wireless Settings
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 32
    log in with your TP-Link ID or the password you set for the router. 2. Go to support OFDMA, can you fully enjoy the benefits. It is disabled by default. 1. Go to Advanced > Wireless > Wireless Settings. 2. Enable OFDMA. • To enable or disable TWT: TWT (Target Wake Time) allows 802.11ax routers
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 33
    by default. If you want to disable the wireless function of the router, just untick the Enable checkbox of each wireless network. In this case you scan for local wireless networks on your wireless device and you need to manually join the network. • To change the security option: 1. Go to Advanced
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 34
    WPS for Wireless Connection Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected Wi-Fi connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Make sure the Wi-Fi of your router is on and go to Advanced
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 35
    PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is printed on the label of the router. 6. 3. 3. Push the WPS Button Click Start on the screen or directly press the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 36
    Settings Check advanced wireless settings for your device. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Additional Settings. 3. Configure advanced wireless settings. • WMM - WMM function can guarantee the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 37
    wireless network. The default value is 100 milliseconds. • RTS Threshold- Enter a value between 1 and 2346 to determine the packet size of data transmission through the router. By default, the RTS (Request to Send) Threshold size is 2346. If the packet size is greater than the preset threshold, the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 38
    Chapter 7 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network options to ensure network
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 39
    Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Guest Network Customize the SSID. Don't select Hide SSID unless you want your guests to manually input the SSID for guest network access. 3 ) Select the Security type
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 40
    Chapter 7 Guest Network 7. 2. Customize Guest Network Options 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless >Guest Network. Locate the Guest Permissions section. 3. Customize guest network options according to
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 41
    use the USB ports to share files and media from the USB storage devices over your home network locally, or remotely through the internet. The router supports USB external flash drives and hard drives. It contains the following sections: • Access the USB Storage Device • Media Sharing • Time Machine
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 42
    and then access files stored there locally or remotely. Tips: • If you use USB hubs, make sure no more than 4 devices are connected to the router. • If the USB storage device requires using bundled external power, make sure the external power has been connected. • If you use a USB hard drive, make
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 43
    Chapter 8 USB Settings • Method 2: Open the Windows Explorer (or go to Computer) and type the server address \\tplinkwifi.net or ftp://tplinkwifi.net in the address bar, then press Enter. Windows computer 1 ) Select Go > Connect to Server. 2 ) Type the server address smb://tplinkwifi.net. 3 )
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 44
    the internet. Follow the steps below to configure remote access settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > USB > USB Storage Device. 3. Tick the Internet FTP checkbox, and then click Save. 4. Refer to the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 45
    Tips: Click Set Up a Dynamic DNS Service Account to learn how to set up a domain name for you router. 8. 1. 3. Customize the Access Settings By on the router's web management page. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 46
    Chapter 8 USB Settings 2. Now you can access the USB storage device by visiting \\MyShare (for Windows) or smb://MyShare (for Mac). • To Only Share Specific Content Focus on the File Sharing section. Specify sharing folders that you want to share and click Save. • To Set Up Authentication for
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 47
    Windows credential mechanism may cause the following problems: • If the sharing password is TP-Link ID or the password you set for the router. 2. Go to Advanced > USB > USB Storage Device. 3. Enable Media Sharing. 4. When your USB storage device is inserted into the router, your DLNA-supported
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 48
    an example. Windows Computer Tablet • Use a third-party DLNA-supported player. 8. 3. Time Machine Time Machine backs up all files on your Mac computer to a USB storage device connected to your router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 49
    Chapter 8 3. Tick the checkbox to enable Time Machine. 4. Click Select to select a location for Time Machine backups. 5. Set the Size Limit for Backups. Note: 0 means no limit for the space. 6. Click Save. USB Settings 45
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 50
    9 HomeShield Customize your home network with enhanced security using a kit of features built in TP-Link HomeShield. Whether protecting your sensitive data or limiting the access of kids and guests, TP-Link HomeShield provides you the tools you need to fully manage your network. It contains the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 51
    9. 1. Network Security TP-Link HomeShield provides many tools to service 1. Scan the QR code or get the Tether app from the Apple App Store or Google Play. OR 2. Launch the Tether app and log in with your TP-Link ID. If you don't have an account, create one first. 3. Log in to your router
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 52
    Tether to enjoy the HomeShield service 1. Scan the QR code or get the Tether app from the Apple App Store or Google Play. OR 2. Launch the Tether app and log in with your TP-Link ID. If you don't have an account, create one first. 3. Log in to your router and tap the HomeShield
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 53
    Chapter 9 HomeShield 2. Launch the Tether app and log in with your TP-Link ID. If you don't have an account, create one first. 3. Log in to your router and tap the HomeShield tab to use this feature. 49
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 54
    Chapter 10 OneMesh with Seamless Roaming This chapter introduces the TP-Link OneMeshTM feature. It contains the following sections: • Set Up a OneMesh Network • Manage Devices in the OneMesh Network
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 55
    Chapter 10 OneMesh with Seamless Roaming TP-Link OneMesh router and TP-Link OneMesh extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh's seamless coverage. INTERNET SAME Network Name & Password
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 56
    Roaming 3. Connect a OneMesh extender to this router by following the setup instructions in the extender's manual. The extender will be listed on the router's OneMesh page. Note: To check full list of TP-Link OneMesh devices, visit https://www.tp-link.com/onemesh/compatibility. 4. If you have set
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 57
    's web page. • To view mesh devices and connected clients in the network: 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Network Map. 3. Click to view all mesh devices, and click to view all connected clients. • To manage a OneMesh
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 58
    Chapter 10 OneMesh with Seamless Roaming 4. Manage the OneMesh device as needed. You can: • Change device information. • Click Manage Device to redirect to the web management page of this device. • Click Leave OneMesh to delete this device from the OneMesh network. 54
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 59
    Chapter 11 Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 60
    based on the protocol. This function is enabled by default. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > Firewall. It's recommended to keep the default settings. 11. 2. Access Control Access Control is used
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 61
    Chapter 11 Network Security 2 ) Click and select devices you want to be blocked and Click ADD. 3 ) The Operation Succeeded message will appear on the screen, which means the selected devices have been successfully added to the blacklist. To allow specific device(s): 1 ) Select Whitelist and
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 62
    message will appear on the screen, which means the selected devices have been successfully added to the whitelist. • Add unconnected devices 1 ) Click Add Manually. 2 ) Enter the Device Name and MAC Address of the device you want to be allowed and click ADD. 3 ) The Operation Succeeded message will
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 63
    to: Prevent ARP spoofing and ARP attacks. How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > IP & MAC Binding. 3. Enable IP & MAC Binding. 4. Bind your device(s) according to your need. To
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 64
    Chapter 11 To bind the unconnected device: 1 ) Click in the Binding List section. Network Security 2 ) Enter the MAC Address and IP Address that you want to bind. 3 ) Click SAVE. Done! Now you don't need to worry about ARP spoofing and ARP attacks! 60
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 65
    the problem that an external host cannot initiatively communicate with a specified device on the local network. With the forwarding feature the router can on the local network, thus realizing some special functions. The TP-Link router supports four forwarding rules. If two or more rules are set,
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 66
    services use different service ports. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > NAT Forwarding > Port Forwarding.
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 67
    want to use is not in the common services list, you can enter the corresponding parameters manually. You should verify the port number that the service needs. • You can add multiple port forwarding rules if you want to provide several services in a router. Please note that the External Port should
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 68
    register a domain name for the WAN referring to Set Up a Dynamic DNS Service Account. Then users on the internet can use http:// domain name to visit TP-Link ID or the password you set for the router. 2. Go to Advanced > NAT Forwarding > Port Triggering and click . 3. Click VIEW COMMON SERVICES
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 69
    application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the external ports the application uses first and enter them into External a team with other players. To solve this problem, set your PC as a DMZ host with all ports open. 65
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 70
    . 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > NAT Forwarding > DMZ and tick in this router. • Only the application supporting UPnP protocol can use this feature. • UPnP feature needs the support of operating system
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 71
    without a hitch. INTERNET If necessary, you can follow the steps to change the status of UPnP. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your needs. 67
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 72
    way through internet when you are out of home. The router offers two ways to setup VPN connection: OpenVPN and PPTP (Point to Point Tunneling its speed is faster, it's compatible with most operating systems and also supports mobile devices. Its security is poor and your packets may be cracked easily
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 73
    tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > OpenVPN, and tick the Enable box of OpenVPN. Note: • Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 74
    should enable PPTP VPN Server on your router, and configure the PPTP connection on the remote device. Please follow the steps below to set up a PPTP VPN connection. Step 1. Set up PPTP VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 75
    Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time with internet. 3. In the Client IP Address field, enter the range of IP addresses (up to 10) that can be leased to the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 76
    Chapter 13 VPN Server 3 ) Click ADD. Step 2. Configure PPTP VPN Connection on Your Remote Device The remote device can use the Windows built-in PPTP software or a third-party PPTP software to connect to PPTP Server. Here we use the Windows built-in PPTP software as an example. 1. Go to Start >
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 77
    Chapter 13 VPN Server 4. Select Use my Internet connection (VPN). 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 73
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 78
    Chapter 13 VPN Server 6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect. 7. The PPTP VPN connection is created and ready to use. 74
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 79
    Chapter 13 VPN Server 75
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 80
    14 Customize Your Network Settings This chapter guides you on how to configure advanced network features. It contains the following sections: • Change the LAN Settings • Configure to Support IPTV Service • Specify DHCP Server Settings • Set Up a Dynamic DNS Service Account • Create Static Routes
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 81
    . 2. Configure to Support IPTV Service I want to: Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP). How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 82
    your router now. You can connect your set-top box to any of the router's Ethernet port. If IGMP is not the technology your ISP applies to provide IPTV service: 1 If not, select the LAN type to determine which port is used to support IPTV service. 4 ) Click SAVE. 5 ) Connect the set-top box to the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 83
    for specified client devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > DHCP Server. • To specify the IP address that the router assigns: 1. Tick the Enable checkbox. 2. Enter the starting and ending IP
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 84
    and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > Dynamic DNS. 3. Select the DDNS Service Provider: TP-Link, NO-IP or DynDNS. It is recommended to select TP-Link so that you can enjoy TP-Link's superior DDNS service. Otherwise, please select NO-IP
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 85
    account. 14. 5. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. 81
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 86
    ' LAN IP addresses to two different IP addresses on the same subnet. Disable Router B's DHCP function. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A. 3. Go to Advanced > Network > Routing. 4. Click Add and finish the settings according to
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 87
    by the port (WAN/LAN) that sends out data packets. In the example, the data are sent to the gateway through the LAN port of Router A, so LAN/ WLAN should be selected. Description: Enter a description for this static routing entry. 5. Click SAVE. 6. Check the Routing Table below. If you can find
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 88
    This chapter will show you the configuration for managing and maintaining your router. It contains the following sections: • Upgrade the Firmware • Backup and Restore Configuration Settings • Change the Login Password • Password Recovery • Local Management • Remote Management • System Log • Test
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 89
    page if there's any update firmware available for your router. Also, the latest firmware will be released at the TP-Link official website www.tp-link.com, and you can download it from the Support page for free. Note: • Backup your router configuration before firmware upgrade. • Do NOT turn off
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 90
    page with the username and password you set for the router. You will see the Firmware Upgrade page. 15. 1. 3. Local Upgrade 1. Download the latest firmware file for the router from www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 91
    , if necessary you can erase the current settings and reset the router to the default factory settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Backup & Restore. • To backup configuration settings
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 92
    the web management page, the account management feature will be disabled. To manage the TP-Link ID, go to Advanced > TP-Link ID. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > System > Administration and focus on the Change Password section
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 93
    This feature allows you to recover the login password you set for you router in case you forget it. Note: If you are using a TP-Link ID to log in to the web management page, the Password Recovery feature , click Forgot Password? on the login page and follow the instructions to set a new password. 89
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 94
    the number of client devices on your LAN from accessing the router by using the MAC address-based authentication. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Administration and complete the settings In Local
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 95
    enter the MAC address of the device manually. 4. Specify a Description for this entry. 5. Click SAVE. 15. 6. Remote Management This feature allows you to control remote devices' authority to manage the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 96
    :port number (such as http://113.116.60.229:1024) to manage the router. Tips: • You can find the WAN IP address of the router on Network Map > Internet. • The router's WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 97
    , you can save the system log and send it to the technical support for troubleshooting. • To save the system log locally: 1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > System Log. 3. Choose the type and level of
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 98
    if the system logs could be sent to my mailbox at 8 a.m. every day. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Log. 3. In the Save Log section, click MAIL LOG. 4. Enter the information required: 94
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 99
    the recipient's email address, which can be the same as or different from the sender's email address. 7 ) Select Mail Log Automatically. Tips: The router will send the system log to the designated email address if this option is enabled. 8 ) Frequency: This determines how often the recipient will
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 100
    Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Diagnostics. 3. the connectivity; • Ping is used to test the connectivity between the router and the tested host, and measure the round-trip time. • Traceroute is used
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 101
    . You can choose the way to obtain the system time as needed. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Time & Language. • To get time from the internet: 1. Enable 24-Hour Time if you want the time
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 102
    Chapter 15 Manage the Router 5. (Optional) In the NTP Server II field, enter the IP The time of your computer will then be displayed and click SAVE. • To manually set the date and time: 1. In the Set Time field, select Manually. 2. Set the current Date (In MM/DD/YYYY format). 3. Set the current
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 103
    The Scheduled Reboot feature cleans the cache to enhance the running performance of the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Reboot. 3. Tick the Enable box of Reboot Schedule. 4. Specify the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 104
    Mode feature to specify a time period during which the LED is off. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > LED Control. 3. Enable Night Mode. 4. Specify the LED off time, and the LED will be off during
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 105
    I do if I forget my web management password? • If you are using a TP-Link ID to log in, or you have enabled the Password Recovery feature of the router, click Forgot password on the login page and then follow the instructions to reset it. • Alternatively, press and hold the Reset button of the
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 106
    4 ) Click LAN settings and deselect the following three options and click OK. 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 102
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 107
    contact the technical support. Note: You'll need to reconfigure the router to surf the internet once the router is reset. Q4. What should I do if I can't access the internet even though the configuration is finished? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 108
    it gets a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. • Reset the router to factory default settings and reconfigure the router. • Upgrade the firmware of the router. • Check the TCP/IP settings on the particular device if
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 109
    of the router. Note: Most TP-Link routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, which may conflict with the IP range of your existing ADSL modem/router. If so, the router is not able to communicate with your modem and you can't access the internet. To resolve this problem, we
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 110
    log in with your TP-Link ID or the password you set for the router. 3 ) Go to Advanced > Network > Internet. 4 ) Select your Internet Connection Type and fill in other parameters. 5 ) Click Save. 6 ) Restart the modem and the router again. • Please upgrade the firmware of the router. If you've tried
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 111
    or blocked somehow. 2 ) Click Troubleshoot and windows might be able to fix the problem by itself. • On Windows XP TP-Link Utility, for example). 3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window. 4 ) Expand Services and Applications > Services
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 112
    Key. 3 ) If it continues to show note of Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless router. Note: Wireless Password/Network Security Key is case sensitive. • Windows unable to connect to XXXX / Can not join this network / Taking longer than
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 113
    AX5400 Wi-Fi 6 Router Model Number: Archer AX73 Component Name I.T.E. Power Supply Model NBS30D120250VU Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link the instructions, may
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 114
    co-located or operating in conjunction with any other antenna or transmitter." We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 115
    changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 116
    ) 5150 MHz -5250 MHz (23dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential 2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 117
    Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 118
    Korea Warning Statements: NCC Notice & BSMI Notice: 注意！ 4.7.9.1 4.7.9.2 AX5400 Wi-Fi 6 Router Equipment name Archer AX73 Type designation (Type) 單元 Ｕnit 鉛 Lead (Pb) PCB ○ 外殼 ○ Restricted substances and its chemical symbols 汞 Mercury (Hg) 鎘
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 119
    • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended • Do
  • TP-Link Archer AX73 | Archer AX73UN V1 User Guide - Page 120
    Symbol Explanation Polarity of output terminals Energy efficiency Marking Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
© 2020 TP-Link
1910012856
REV1.0.0
User Guide
AX5400 Wi-Fi 6 Router
Archer AX73