TP-Link Archer AX6000 Archer AX6000US V1 User Guide

TP-Link Archer AX6000 Manual

Get TP-Link Archer AX6000 PDF manuals and user guides View all TP-Link Archer AX6000 manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link Archer AX6000 manual content summary:

  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 1
    User Guide AX6000 Next-Gen Wi-Fi Router Archer AX6000 REV1.1.0 1910012697
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 2
    2. Quick Setup Via TP-Link Tether App 13 4. 3. Manually Set Up Your Internet Connection 14 4. 4. Set Up the Router as an Access Point 18 4. 5. Set Up an IPv6 Internet Connection 19 Chapter 5. TP-Link Cloud Service 23 5. 1. Register a TP-Link ID 24 5. 2. Change Your TP-Link ID Information 24
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 3
    Your Network Settings 67 12. 1. Change the LAN Settings 68 12. 2. Set Up Link Aggregation 68 12. 3. Configure to Support IPTV Service 69 12. 4. Specify DHCP Server Settings 70 12. 5. Set Up a Dynamic DNS Service Account 71 12. 6. Create Static Routes 73 12. 7. Specify Wireless Settings 75 12
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 4
    . 4. Test Your Internet Speed 84 13. 5. Upgrade the Firmware 85 13. 5. 1.Online Upgrade 86 13. 5. 2.Manual Upgrade 86 13. 5. 3.Restore Interrupted Upgrade After Power Failure 87 13. 6. Backup and Restore Configuration Settings 87 13. 7. Set the Router to Reboot Regularly 89 13. 8. Change the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 5
    The latest software, management app and utility can be found at Download Center at https://www.tp-link.com/us/support/download/. The Quick Installation Guide can be found where you find this guide or inside the package of the router. Specifications can be found on the product page at https://www
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 6
    TP-Link Community is provided for you to discuss our products and share knowledge at https://www.tp-link.com/us/support/download/. Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support/. 2
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 7
    Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections: • Product Overview • Appearance
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 8
    1 Get to Know About Your Router 1. 1. Product Overview Archer AX6000, TP-Link's first router with next-generation 802.11ax Wi-Fi system is starting up or the router is being reset. The firmware is being upgraded or WPS connection is being established. The router is connected to the internet, but
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 9
    For connecting to a DSL/Cable modem, or an Ethernet jack. LAN Ports (1-8) For connecting your PC or other wired devices to the router. Power Port For connecting the router to power socket via the provided power adapter. Reset Button Use a pin to press and hold the button until the LED begins
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 10
    Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Router • Connect Your Router
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 11
    and power cord are safely placed out of the way so they do not create a tripping hazard. • The router can be placed on a shelf or desktop. • Keep the router away from devices with strong electromagnetic interference, such as Bluetooth devices, cordless phones and microwaves. 2. 2. Connect Your
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 12
    -Fi TP-Link_XXXX TP-Link_XXXX_5G CHOOSE A NETWORK... OR TP-Link_XXXX Connect automatically Connect TP-Link_XXXX_5G Other... • Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, and most USB network cards, can be connected to your router through
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 13
    Chapter 2 Connect the Hardware 2 ) Within two minutes, press the WPS button on your router. WLAN On TP-Link MyHome David HomeNetwork TP-Link_Home TP-Link_Router Test close to 9
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 14
    Chapter 3 Log In to Your Router
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 15
    Mozilla Firefox or Apple Safari. Follow the steps below to log in to your router. 1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode the FAQ Section. • If you have registered a TP-Link ID and bound your cloud router to it, the login password you created here will be invalid. Please
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 16
    , you can also set up an IPv6 connection if your ISP provides IPv6 service. It contains the following sections: • Use Quick Setup Wizard • Quick Setup Via TP-Link Tether App • Manually Set Up Your Internet Connection • Set Up the Router as an Access Point • Set Up an IPv6 Internet Connection
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 17
    service from TP-Link (remote management, TP-Link DDNS, and more.), log in with your TP-Link ID or click Resigter Now to get one. Then follow the instructions to bind the cloud router to your TP-Link ID. Note: • To learn more about the TP-Link Cloud service, please refer to the TP-Link Cloud Service
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 18
    the Tether app, tap the + button and select Archer AX6000. Follow the steps to complete the setup and connect to the internet. 4. Connect your devices to the newly configured wireless networks of the router and enjoy the internet! 4. 3. Manually Set Up Your Internet Connection In this part, you
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 19
    Chapter 4 Set Up Internet Connection 2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields. 3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable modems. 15
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 20
    Chapter 4 Set Up Internet Connection 4 ) If you choose L2TP, enter the username and password and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen. 5 ) If you choose PPTP, enter the username and password,
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 21
    take 1-2 minutes to make the settings valid. Tips: • If your internet connection type is BigPond Cable, please go to Advanced > Network > Internet to set your router. • If you use Dynamic IP and PPPoE and you are provided with any other parameters that are not required on the page, please go to
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 22
    wired network to a wireless one. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Operation Mode, select Access Point and click Save. The router will reboot and switch to Access Point mode. 3. After rebooting, connect the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 23
    NAT Forwarding, are not supported in the Access Point mode. • Functions, such as Guest Network, are the same as those in the Router mode. 4. 5. Set 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > IPv6. 3. Enable IPv6 and
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 24
    if your ISP requires. Click Save and then click Renew. 3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6 server. Click Advanced to input further information if session with IPv4 connection checkbox and manually enter the username and password for the IPv6 connection. 20
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 25
    Chapter 4 Set Up Internet Connection 4 ) 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type (Manually Set Up Your Internet Connection). Click Advanced to input further information if your ISP requires. Click Save and then click Connect. 5 ) Pass-Through (
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 26
    Chapter 4 Set Up Internet Connection 5. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by your ISP, and click Save. Tips: Find Help on the web management page to know more about items. 6. Click Status to check whether you
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 27
    Cloud will notify you when an important firmware upgrade is avaliable. Surely you can also manage multiple TP-Link Cloud devices with a single TP-Link ID. This chapter introduces how to register a new TP-Link ID, bind or unbind TP-Link IDs to manage your router, and the Tether app with which you
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 28
    5 TP-Link Cloud Service 5. 1. Register a TP-Link ID If you have skipped the registration during the Quick Setup process, you can: 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Basic > TP-Link Cloud. 3. Click Register Now and follow the instructions
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 29
    Chapter 5 TP-Link Cloud Service • To change your password: 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save. 5. 3. Manage the User TP-Link IDs The TP-Link ID used to log in to the router for the first time will be automatically bound as the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 30
    5 TP-Link Cloud Service • Add/remove other TP-Link IDs to/from the router. 5. 3. 1. Add TP-Link ID to Manage the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID. 2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section. 3. Click , enter another TP-Link ID
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 31
    Chapter 5 TP-Link Cloud Service 5. 4. Manage the Router via the TP-Link Tether App The Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the Apple App Store or Google Play store and search "TP-Link Tether" or simply scan the QR code to download and install the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 32
    Chapter 6 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network options to ensure network
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 33
    Chapter 6 Guest Network 6. 1. Create a Network for Guests 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Guest Network. Locate the Wireless section. 3. Create a guest network as needed. 1 ) Enable 2.4GHz Wireless network
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 34
    Chapter 6 Guest Network 6. 2. Customize Guest Network Options 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Guest Network. Locate the Settings section. 3. Customize guest network options according to your needs. • Allow
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 35
    use the USB ports to share files and media from the USB storage devices over your home network locally, or remotely through the internet. The router supports USB external flash drives and hard drives. It contains the following sections: • Access the USB Storage Device • Media Sharing • Time Machine
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 36
    and then access files stored there locally or remotely. Tips: • If you use USB hubs, make sure no more than 4 devices are connected to the router. • If the USB storage device requires using bundled external power, make sure the external power has been connected. • If you use a USB hard drive, make
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 37
    Chapter 7 USB Settings • Method 2: Open the Windows Explorer (or go to Computer) and type the server address \\tplinkwifi.net or ftp://tplinkwifi.net in the address bar, then press Enter. Windows computer 1 ) Select Go > Connect to Server. 2 ) Type the server address smb://tplinkwifi.net. 3 )
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 38
    internet. Follow the steps below to configure remote access settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > USB Sharing > USB Storage Device > Access Address page. 3. Tick the FTP (via Internet) checkbox, and then
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 39
    Tips: Click Set Up a Dynamic DNS Service Account to learn how to set up a domain name for you router. 7. 1. 3. Customize the Access Settings By address on the router's web management page. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 40
    Save. All folders are shared by default. Tips: The Share icon appears in the Devices Settings section when more than 5 volumes are connected to the router. You can click the Share icon to disable volumes you don't need to share. • To Set up Authentication for Data Security You can set up
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 41
    Windows credential mechanism may cause the following problems: • If the sharing password is on the USB storage device directly from DLNA-supported devices, such as your computer, tablet and into the router, your DLNA-supported devices (such as your computer and pad) connected to the router can detect
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 42
    an example. Windows Computer Tablet • Use a third-party DLNA-supported player. 7. 3. Time Machine Time Machine backs up all files on your Mac computer to a USB storage device connected to your router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 43
    Chapter 7 4. Click Select to select a location for Time Machine backups. 5. Set the Size Limit for Backups. Note: 0 means no limit for the space. 6. Click Save. USB Settings 39
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 44
    Chapter 8 HomeCare - Parental Controls, QoS, Antivirus TP-Link HomeCareTM powered by Trend MicroTM provides a kit of features to help you create a personalized network that caters for the whole family. You can ensure appropriate
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 45
    School Nights (Sunday to Thursday). How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Basic > HomeCare > Parental Controls or Advanced > Parental Controls. 3. Click to create a profile for a family member. 4. Add
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 46
    Chapter 8 HomeCare - Parental Controls, QoS, Antivirus Note: Only devices that have previously been connected to your router's network are listed here. If you are unable to find the device you want to add, connect it to your network and then try again. 4 )
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 47
    child has visited and how much time they have spent online recently. How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 43
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 48
    create a profile. Refer to Scenario 1: Setting Up Access Restrictions for detailed instructions. 4. Use the drop-down menu to view the websites visited and time your child's online activities. 8. 2. QoS QoS (Quality of Service) allows you to prioritize the internet traffic of specific online
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 49
    that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Basic > HomeCare > QoS or Advanced > to run a test to get the value or manually enter the bandwidth provided by your internet service provider. 4. In the Application Priority tab,
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 50
    your computer for the next 2 hours. 8. 3. Antivirus Your router supports built-in Antivirus powered by Trend MicroTM. It provides malicious content access your router's Antivirus settings: 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 51
    Chapter 8 HomeCare - Parental Controls, QoS, Antivirus 3. Choose the protection types you want to enable. It is recommended to keep them all enabled to ensure the best protection for your network. 4. Click to view threats that have been detected and resolved. 47
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 52
    Chapter 9 Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can block or
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 53
    my network (via wired or wireless). How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > Access Control. 3. Enable Access Control. 4. Select the access mode to either block (recommended) or allow
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 54
    Chapter 9 1 ) Select Blacklist and click Save. Network Security 2 ) Select the device(s) to be blocked in the Online Devices table by ticking the checkbox(es). 3 ) Click Block above the Online Devices table. The selected devices will be added to Devices in Blacklist automatically. To allow
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 55
    to: Prevent ARP spoofing and ARP attacks. How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > IP & MAC Binding. 3. Enable ARP Binding. 4. Bind your device(s) according to your need. To bind the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 56
    Chapter 9 Network Security 2 ) Enter the MAC address and IP address that you want to bind. Enter a Description for this binding entry. 3 ) Tick the Enable This Entry checkbox and click OK. Done! Now you don't need to worry about ARP spoofing and ARP attacks! 52
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 57
    the problem that an external host cannot initiatively communicate with a specified device on the local network. With the forwarding feature the router can on the local network, thus realizing some special functions. The TP-Link router supports four forwarding rules. If two or more rules are set,
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 58
    192.168.0.100. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > NAT Forwarding > Virtual Servers. 4. Click Add. Click View Existing Services and select HTTP. The External Port, Internal Port and Protocol will be automatically
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 59
    Service Type, you can enter the corresponding parameters manually. You should verify the port number that the service needs. • You can add multiple virtual server rules if you want to provide several services in a router with your TP-Link ID or the password you set for the router. 2. Go to Advanced >
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 60
    • The triggering ports can not be overlapped. • If the application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the external ports the application uses first and enter them into External Port field according to the format the page
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 61
    players. To solve this problem, set your PC as a DMZ host with all ports open. How can I do that? 1. Assign a static IP address to your PC, for example 192.168.0.100. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 62
    Xbox online games without a hitch. LAN WAN Internet XBOX Router If necessary, you can follow the steps to change the status of UPnP. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > NAT Forwarding > UPnP and toggle on
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 63
    a secured way through internet when you are out of home. The router offers two ways to setup VPN connection: OpenVPN and PPTP (Point to and its speed is faster, it's compatible with most operating systems and also supports mobile devices. Its security is poor and your packets may be cracked easily,
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 64
    http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > OpenVPN, and select Enable VPN Server. Note: • Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 65
    device. Please follow the steps below to set up a PPTP VPN connection. Step 1. Set up PPTP VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > PPTP VPN, and select Enable VPN Server. 61
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 66
    Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time with internet. 3. In the Client IP Address filed, enter the range of IP addresses (up to 10) that can be leased to the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 67
    Chapter 11 VPN Server 1 ) Click Add. 2 ) Enter the Username and Password to authenticate devices to the PPTP VPN Server. 3 ) Click OK. Step 2. Configure PPTP VPN Connection on Your Remote Device The remote device can use the Windows built-in PPTP software or a third-party PPTP software to connect
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 68
    Chapter 11 VPN Server 4. Select Use my Internet connection (VPN). 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 64
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 69
    Chapter 11 VPN Server 6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect. 7. The PPTP VPN connection is created and ready to use. 65
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 70
    Chapter 11 VPN Server 66
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 71
    Network Settings This chapter guides you on how to configure advanced network features. It contains the following sections: • Change the LAN Settings • Set Up Link Aggregation • Configure to Support IPTV Service • Specify DHCP Server Settings • Set Up a Dynamic DNS Service Account • Create Static
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 72
    network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > LAN. 3. Type in a new IP Address appropriate to your needs. And leave the Subnet Mask as the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 73
    12. 3. Configure to Support IPTV Service I want to: Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP). How can I do that? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 74
    . If not, select the LAN type to determine which port is used to support IPTV service. 4 ) Click Save. 5 ) Connect the set-top box to the with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > DHCP Server. • To specify the IP address that the router assigns:
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 75
    and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > Dynamic DNS. 3. Select the DDNS Service Provider (TP-Link, NO-IP or DynDNS). It is recommended to select TP-Link so that you can enjoy TP-Link's superior DDNS service. Otherwise, please select NO-IP
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 76
    Chapter 12 Customize Your Network Settings Note: To enjoy TP-Link's DDNS service, you have to log in with a TP-Link ID. If you have not logged in with one, click Log in. 4. Click Register in the Domain Name List if you have chosen TP-Link, and enter the Domain Name as needed. If you have chosen NO
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 77
    6. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. I want to: Visit
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 78
    ' LAN IP addresses to two different IP addresses on the same subnet. Disable Router B's DHCP function. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A. 3. Go to Network > Advanced Routing. 4. Click Add and finish the settings according to the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 79
    settings according to your needs. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. • To enable or disable the wireless function: 1. Go to Basic > Wireless. local wireless networks on your wireless device and you need to manually join the network. 75
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 80
    Chapter 12 Customize Your Network Settings • To use the smart connect function The smart connect function lets you to enjoy a more high-speed network by assigning your devices to best wireless bands based on actual conditions to balance network demands. 1. Go to Advanced > Wireless > Wireless
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 81
    Setup (WPS) provides an easier approach to set up a security-protected Wi-Fi connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Make sure the Wi-Fi of your router is on and go to Advanced > Wireless > WPS. 3. Enable WPS. 77
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 82
    Note: PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is printed on the label of the router. 12. 8. 3. Connect via the Client's PIN Enter the PIN of your device and
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 83
    specific time when you do not need the wireless connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Wireless Schedule. 3. Enable the Wireless Off Time Schedule feature. 4. Click Add to specify a wireless
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 84
    will show you the configuration for managing and maintaining your router. It contains the following sections: • Set Up System Time • Control LEDs • Test the Network Connectivity • Test Your Internet Speed • Upgrade the Firmware • Backup and Restore Configuration Settings • Change the Administrator
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 85
    system time as needed. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Time Settings. • To get time from Internet time and click Save. • To manually set the date and time: 1. In the Set Time field, select
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 86
    turn off the LEDs either from the web management page or by pressing the LED button. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > LED Control. 3. Tick the Night Mode checkbox. 82
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 87
    and the host or other network devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Diagnostics. 3. Enter the information with the help of page tips: 1 ) Choose Ping or Traceroute as the diagnostic tool
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 88
    provider and gives practical advice about the activities you can enjoy. • To test your internet speed: 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Basic > Network Map and click . 3. If it is the first time you run a test, the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 89
    will inform you through the web management page if there's any update firmware available for your router. Also, the latest firmware will be released at the TP-Link official website www.tp-link.com, and you can download it from the Support page for free. Note: • Make sure you remove all attached USB
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 90
    page with the username and password you set for the router. You will see the Firmware Upgrade page. 13. 5. 2. Manual Upgrade 1. Download the latest firmware file for the router from www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 91
    in your computer. If not, try another way to connect your computer to the Internet and download the latest firmware file from www.tp-link.com. 2. Connect your computer to the router with an Ethernet cable. 3. Visit 192.168.0.1 and you will see the following upgrade page. 4. Click Browse and select
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 92
    minutes for the restoring and rebooting. Note: During the restoring process, do not turn off or reset the router. • To reset the router except your login password and bound TP-Link ID: 1. Click Restore under the Factory Default Restore session. 2. Wait a few minutes for the resetting and rebooting
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 93
    the web management page, the account management feature will be disabled. To manage the TP-Link ID, go to Basic > TP-Link Cloud. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > System Tools > Administration and focus on the Account Management
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 94
    new password for future logins. 13. 9. Password Recovery This feature allows you to recover the login password you set for you router in case you forget it. Note: If you are using a TP-Link ID to log in to the web management page, the Password Recovery feature will be disabled. To manage the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 95
    page and follow the instructions to set a new password. 13. 10. Local Management This feature allows you to limit the number of client devices on your LAN from accessing the router by using the MAC address-based authentication. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 96
    of the device manually. 4. Specify a Description for this entry. 5. Tick the Enable This Entry checkbox. 6. Click OK. 13. 11. Remote Management This feature allows you to control remote devices' authority to manage the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 97
    , you can save the system log and send it to the technical support for troubleshooting. • To save the system log locally: 1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Log. 3. Choose the type and level
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 98
    would be great if the system logs could be sent to my mailbox at 8 a.m. every day. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Log. 3. Click Mail Settings. 4. Enter the information required: 94
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 99
    to login the sender's email address. 7 ) Select Enable Auto Mail. Tips: The router will send the system log to the designated email address if this option is enabled. 8 log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Traffic Statistics.
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 100
    Chapter 13 Manage the Router 3. Toggle on Traffic monitor, and then you can monitor the traffic the case. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Parameters. Focus on 2.4GHz/5GHz Wireless
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 101
    , but still able to access the internet, enable AP Isolation feature. • Zero-Wait DFS - Zero-Wait DFS (Dynamic Frequency Selection) allows the router to immediately reselect a new channel once radar signal is detected on a channel allocated to radar devices to ensure lag-free network experience. It
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 102
    an access point to extend the wireless network coverage. The access point should also support WDS Bridging feature. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Parameters. Focus on 2.4GHz/5GHz WDS
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 103
    protects the local network by hiding IP addresses of the devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Parameters. Focus on NAT section. 3. NAT feature is enable by dafault and it's highly
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 104
    Chapter 14 Work with Alexa This chapter will show you how to configure your router to work with Alexa.
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 105
    Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Smart Life Assistant. 3. Follow the on-screen instructions on the Alexa section to set up smart control of your router. ≡ Or download TP-Link Tether app, open it and tap the icon
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 106
    I do if I forget my web management password? • If you are using a TP-Link ID to log in, or you have enabled the Password Recovery feature of the router, click Forgot password on the login page and then follow the instructions to reset it. • Alternatively, press and hold the Reset button of the
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 107
    4 ) Click LAN settings and deselect the following three options and click OK. 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 103
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 108
    contact the technical support. Note: You'll need to reconfigure the router to surf the internet once the router is reset. Q4. What should I do if I can't access the internet even though the configuration is finished? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 109
    recognize any DNS server addresses. Please manually configure the DNS server. 1 ) Go to Advanced > Network > DHCP Server. 2 ) Enter 8.8.8.8 as Primary DNS, click Save. Tips: 8.8.8.8 is a safe and public DNS server operated by Google. • Restart the modem and the router. 1 ) Power off your modem and
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 110
    the modem is proper. • Clone the MAC address of your computer. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2 ) Go to Advanced > Network > Internet and focus on the MAC Clone section. 3 ) Choose an option as needed (enter the MAC address
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 111
    of the router. Note: Most TP-Link routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, which may conflict with the IP range of your existing ADSL modem/router. If so, the router is not able to communicate with your modem and you can't access the internet. To resolve this problem, we
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 112
    router again. • Please upgrade the firmware of the router. If you've tried every method above but still cannot access the internet, please contact the technical support somehow. 2 ) Click Troubleshoot and windows might be able to fix the problem by itself. • On TP-Link Utility, for example). 108
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 113
    click on Start button and make sure the Service status is Started. And then click OK. your wireless router/modem. • Make sure your computer/device is still in the range of your router/modem. connect, please follow the steps below: • Authenticating problem/password mismatch: 1 ) Sometimes you will be
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 114
    Key. 3 ) If it continues to show note of Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless router. Note: Wireless Password/Network Security Key is case sensitive. • Windows unable to connect to XXXX / Can not join this network / Taking longer than
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 115
    COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 116
    AX6000 Next-Gen Wi-Fi Router Model Number: Archer AX6000 Component Name I.T.E. Power Model S050FU1200400 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link the instructions, may
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 117
    co-located or operating in conjunction with any other antenna or transmitter." We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 118
    changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 119
    (23dBm) 5470 MHz -5725 MHz (30dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 120
    1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement é
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 121
    NCC Notice & BSMI Notice: 注意！ 4.7.9.1 4.7.9.2 Pb Cd Hg 六價鉻 CrVI PBB PBDE PCB ○○ ○ ○ ○ ○ 外殼 ○○ ○ ○ ○ ○ ○ ○ ○ 備考1. 超出0.1 wt 0.01 wt 備考2 備考3 117
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 122
    Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended • Do not use the device
  • TP-Link Archer AX6000 | Archer AX6000US V1 User Guide - Page 123
    Explanations of the symbols on the product label Symbol Explanation DC voltage Indoor use only AC voltage Class II equipment Polarity of output terminals Energy efficiency Marking RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
REV1.1.0
1910012697
User Guide
AX6000 Next-Gen Wi-Fi Router
Archer AX6000