TP-Link Archer AX50 Archer AX50US V1 Quick Installation Guide
TP-Link Archer AX50 Manual
 |
View all TP-Link Archer AX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer AX50 manual content summary:
- TP-Link Archer AX50 | Archer AX50US V1 Quick Installation Guide - Page 1
a password to log in. Note: If the login window does not appear, please refer to Q1 of Need Help? in this guide. http://tplinkwifi.net Password Confirm Password Let's Get Started 3. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service. - TP-Link Archer AX50 | Archer AX50US V1 Quick Installation Guide - Page 2
the login page and then follow the instructions to reset it. Alternatively, press and hold the Reset button on the back until all LEDs turn on. Then visit http://tplinkwifi.net to create a new login password. ©2020 TP-Link 7106508709 REV1.0.3 Quick Installation Guide AX3000 Gigabit Wi-Fi 6 Router
-
1 -
2
 |
 |
Connect the Hardware
Set Up the Network
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
Scan for Tether
Tether
or
Choose your device type
Archer AX11000
Archer C5400X
Range Extender
Router
Archer AX6000
Method TWO: Via a Web Browser
The default wireless network names (SSIDs) and password
are printed on the label at the bottom of the router.
1. Connect your device to the router wirelessly
or with an Ethernet cable.
2. Launch a web browser, and enter
http://tplinkwifi.net
or
in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.
Note: If the login window does not appear, please refer to
Q1
of
Need Help?
in this guide.
2. Open the Tether app and log in with your
TP-Link ID.
3. Tap the
button in the Tether app and
select
Router
>
Wireless Router
. Follow
the steps to complete the setup and
connect to the internet.
Note: If you don’t have an account, create one first.
http://tplinkwifi.net
Let’s Get Started
Confirm Password
Password
Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the WPS/Wi-Fi button on the back for more
than 2 seconds. Both the LEDs should turn solid on.
Power
On
Internet
On
2.4GHz
On
5GHz
On
If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL /
Cable / Satellite modem, connect the Ethernet cable to the router’s WAN port, and then follow steps 3
and 4 to complete the hardware connection.
*Image may differ from actual product.
Unplug the power
to turn off your modem, if any, and remove
the backup battery if it has one.
Place the router horizontally and orient the antennas vertically.
Modem
Unplug the power
Power on the modem, and then wait
about
2 minutes
for it to restart.
2
Connect the power adapter to
the router and turn on the router.
3
Verify that the hardware connection is correct by checking the following LEDs.
4
Set up with videos:
Scan QR code or visit
rt/setup-video/#wi-fi-routers
1
2
Model: Archer AX3000
AX3000 Gigabit Wi-Fi Router
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Internet
Connect the
powered-off
modem to the router’s
WAN
port with an Ethernet cable.
1