TP-Link Archer AX10 Archer AX1500US V1&V1.2 Quick Installation Guide
TP-Link Archer AX10 Manual
 |
View all TP-Link Archer AX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer AX10 manual content summary:
- TP-Link Archer AX10 | Archer AX1500US V1&V1.2 Quick Installation Guide - Page 1
tp-link.com/support/ type Router Range Extender Archer AX11000 Archer C5400X Archer AX6000 Method TWO: guide. http://tplinkwifi.net New Password: Confirm Password: Let's Get Started 3. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service - TP-Link Archer AX10 | Archer AX1500US V1&V1.2 Quick Installation Guide - Page 2
TP-Link Cloud devices, all from a single TP-Link ID. To communicate with TP-Link users or engineers, visit https://community.tp-link.com to join TP-Link Community. For technical support, replacement services, user guides and more, please visit https://www.tp-link.com/support Email techwriter@tp-link
-
1 -
2
 |
 |
New Password:
Let’s Get Started
Confirm Password:
http://tplinkwifi.net
Connect the Hardware
Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the WPS/Wi-Fi button on the back for more
than 2 seconds, then release the button. Both the LEDs should turn solid on.
Power
On
Internet
On
2.4GHz
On
5GHz
On
If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL /
Cable / Satellite modem, connect the Ethernet cable to the router’s WAN port, and then follow steps 3
and 4 to complete the hardware connection.
*Image may differ from actual product.
Unplug the power
to turn off your modem, if any, and remove
the backup battery if it has one.
Place the router horizontally and orient the antennas vertically.
Modem
Unplug the power
Power on the modem, and then wait
about
2 minutes
for it to restart.
2
Connect the power adapter to
the router and turn on the router.
3
Verify that the hardware connection is correct by checking the following LEDs.
4
Set up with videos:
Scan QR code or visit
https://
www.tp-link.com/support/setup-video/#wi-fi-routers
1
Internet
Connect the
powered-off
modem to the router’s
WAN
port with an Ethernet cable.
1
Set Up the Network
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
Scan for Tether
Tether
or
Choose your device type
Archer AX11000
Archer C5400X
Range Extender
Router
Archer AX6000
Method TWO: Via a Web Browser
The default wireless network names (SSIDs) and password
are printed on the label at the bottom of the router.
1. Connect your device to the router wirelessly
or with an Ethernet cable.
2. Open the Tether app and log in with your
TP-Link ID.
3. Tap the
button in the Tether app and
select
Router
>
Wireless Router
. Follow
the steps to complete the setup and
connect to the internet.
Note: If you don’t have an account, create one first.
2
Model: Archer AX3000
AX3000 Gigabit Wi-Fi Router
Wireless Password/PIN
:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
2. Launch a web browser, and enter
http://tplinkwifi.net
or
in
the address bar. Create a password to log in.
Note: If the login window does not appear, please refer to
Q1
of
Need Help?
in this guide.
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.