TP-Link AV1200 TL-PA8010P KIT(US) V1 User Guide
TP-Link AV1200 Manual
 |
View all TP-Link AV1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link AV1200 manual content summary:
- TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 1
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter REV1.0.0 1910011141 - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 2
part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2014 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 3
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 4
to completely shut off power is to disconnect the product or the power adapter from the power source. Don't disassemble the product, or make the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. This product can be - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 5
TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AV1200 Gigabit Passthrough Powerline Adapter Model No.: TL-PA8010P Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 6
Add Device...15 4.3 Advanced...16 4.4 System...17 4.4.1 Upgrade Firmware 17 4.4.2 Reset Device 18 4.4.3 Set All Devices' Network Name 19 Chapter 5 Advanced Feature: How to Use the Pair Button......... 20 5.1 Set Up a Secure Powerline Network 20 5.2 Reset ...20 Appendix A: Troubleshooting 21 - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 7
powerline adapter supports built-in 128-bit AES encryption and Quality of Service (QoS) features. The new powerline adapter TL-PA8010P from TP-LINK provides extra convenience and better performance for your home network with its integrated electrical socket and mains filer. The common problem of - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 8
guide stands for TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter without any explanation. 1.4 LED Indicator The LED indicator displays information about the device's status. Item Power LED Status On/Off Blinking Indication The powerline adapter is on or off. Blinking every second: Pairing - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 9
AV1200 Gigabit Passthrough Powerline Adapter Item Powerline LED Ethernet LED Status Yellow-green Red Off Indication Powerline network is in good condition. Powerline network is in poor condition. We recommend trying another wall socket. The powerline adapter is not connected to any powerline - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 10
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter Note: 1. If the pair button is pressed for about 8 seconds, the powerline adapter will leave the network which it has joined and its new network name assumes a random value. The Powerline LED turns off when it disconnects from the powerline - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 11
AV1200 Gigabit Passthrough Powerline Adapter Chapter 2 Connecting Mechanism 2.1 Introduction The powerline adapter supports up to 1200Mbps data rate. With this high speed connection rate, this powerline adapter house. Note that powerline adapters work in pairs. One powerline adapter is connected to - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 12
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter 2.3 Hardware Connection - Computer For those computers you wish to be networked by powerline adapter, each of the computers must be properly connected with a powerline adapter through an Ethernet (RJ45) cable. Following are the steps to - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 13
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter 2.4 Hardware Connection - Internet This section describes how to connect the powerline adapter into your existing ADSL broadband connection via ADSL Ethernet port. Follow the procedures described below to connect the powerline adapter to your - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 14
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter Chapter 3 Installing Management Utility Please verify that no other powerline adapter or any Encryption Management Utilities are installed before installing the provided software. If other Powerline Utilities are installed, uninstall them and - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 15
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter 9 - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 16
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter 10 - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 17
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter Step 3: After the installation, a shortcut to the "PowerLine Utility" application icon is provided on the windows desktop. 11 - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 18
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter Chapter 4 Using the Management Utility After you'd successfully installed the powerline adapter hardware and Management Utility software, you can set up or configure the devices according to your need. This PowerLine Utility enables the users - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 19
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter MAC Address: Displays the MAC address of the powerline adapter connected to the current computer where this management utility is running. Network Name: Displays the network name of the current network or you can give a name for the network - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 20
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter 4.2 Network The Network tab window shows information of all the powerline devices found on the current logical network. Furthermore, here you can change the device name of the listed powerline devices as well as add another device to the - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 21
AV1200 Gigabit Passthrough Powerline Adapter network name of this device on the System configuration page. To change the name of a powerline be found on the back of the powerline device. (3) Click the Save button all powerline devices you and password. Note that the powerline device must be present on - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 22
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter 4.3 Advanced The third tab window labeled "Advanced" is for Quality of Service. With the proper configuration, the limit bandwidth can be took full advantage. QoS requirements are different for various data types such as streaming video or - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 23
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter Simple adapter. On this tab window, you can upgrade the firmware to the latest version, reset the adapter's settings to the factory defaults and configure all adapters' network names. 4.4.1 Upgrade Firmware Click the Upgrade Firmware - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 24
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter NVM: None-volatile memory. It is used for upgrading the firmware. PIB: resetting the PLC. To upgrade the device's firmware, follow these instructions: 1. Download PIB file and firmware upgrade file from the TP-LINK website (www.tp-link - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 25
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter 4.4.3 Set All Devices' Network Name The Set All Devices' the Set Network Name button to apply the setting. Note: Every powerline adapter on your home network MUST have the same Network Password for connectivity to be established throughout your home - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 26
PA8010P AV1200 Gigabit Passthrough Powerline Adapter Chapter 5 Advanced Feature: How to Use the Pair Button 5.1 Set Up a Secure Powerline Network The Homeplug AV standard uses 128-bit AES (Advanced Encryption Standard) to safely transmit data between powerline adapters. For the powerline adapters to - TP-Link AV1200 | TL-PA8010P KIT(US) V1 User Guide - Page 27
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter Appendix A: Troubleshooting The Troubleshooting provides answers to common problems regarding the powerline adapter. 1. The Power LED does not light up. Ans. Check the following: a) Make sure that the powerline adapter is properly plugged
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
 |
 |
TL-PA8010P
AV1200 Gigabit Passthrough Powerline Adapter
REV1.0.0
1910011141