TP-Link AV1000 TL-PA7020P KIT V1 User Guide

TP-Link AV1000 Manual

TP-Link AV1000 manual content summary:

  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 1
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter REV1.0.0 1910011148
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 2
    part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2014 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 3
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 4
    to completely shut off power is to disconnect the product or the power adapter from the power source.  Don't disassemble the product, or make the risk of electric shock and voiding the limited warranty. If you need service, please contact us.  Avoid water and wet locations. This product can be
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 5
    : Product Description: AV1000 2-port Gigabit Passthrough Powerline Adapter Model No.: TL-PA7020P Trademark: TP-LINK We declare under declaration: Yang Hongliang Product Manager of International Business Date of issue: 2014 TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 6
    Connecting Mechanism 5 2.1 Introduction...5 2.2 Connection Instruction 5 2.3 Hardware Connection - Computer 6 Firmware 16 4.4.2 Reset Device 17 Chapter 5 Advanced Feature: How to Use the Pair Button......... 18 5.1 Set Up a Secure Powerline Network 18 5.2 Reset ...18 Appendix A: Troubleshooting
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 7
    this powerline adapter supports built-in 128-bit AES encryption and Quality of Service (QoS) features. The new powerline adapter TL-PA7020P from TP-LINK provides extra convenience and better performance for your home network with its integrated electrical socket and mains filter. The common problem
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 8
    product from the mains and refer the product to qualified service personnel for the following conditions:  If liquid has been spilled powerline adapter or AV1000 2-port Gigabit Passthrough Powerline Adapter mentioned in this guide stands for TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 9
    AV1000 2-port Gigabit Passthrough Powerline Adapter Item Powerline LED Ethernet LED Status On Off On Off Indication The powerline adapter is connected to a powerline network. The powerline adapter is not connected to any powerline network or is in Power-Saving Mode. At least one Ethernet port
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 10
    AV1000 2-port Gigabit Passthrough Powerline Adapter  Note: 1. If the pair button is pressed for about 8 seconds, the powerline adapter will leave the network which it has joined and its new network name assumes a random value. The Powerline LED turns off when it disconnects from the powerline
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 11
    AV1000 2-port Gigabit Passthrough Powerline Adapter Chapter 2 Connecting Mechanism 2.1 Introduction The powerline adapter supports up to 1000Mbps data rate. With this high speed connection rate, this powerline adapter . Note that powerline adapters work in pairs. One powerline adapter is connected to
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 12
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter 2.3 Hardware Connection - Computer For those computers you wish to be networked by powerline adapters, each of the computers must be properly connected with a powerline adapter through an Ethernet (RJ45) cable. Following are the steps
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 13
    -PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter 2.4 Hardware Connection - Internet This section describes how to connect the powerline adapter into your existing ADSL broadband connection via ADSL Ethernet port. Follow the procedures described below to connect the powerline adapter to
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 14
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter Chapter 3 Installing Management Utility Please verify that no other powerline adapter or any Encryption Management Utilities are installed before installing the provided software. If other Powerline Utilities are installed, uninstall
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 15
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter 9
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 16
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter 10
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 17
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter Step 3: After the installation, a shortcut to the "PowerLine Utility" application icon is provided on the windows desktop. 11
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 18
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter Chapter 4 Using the Management Utility After you had successfully installed the powerline adapter hardware and Management Utility software, you can set up or configure the devices according to your need. This PowerLine Utility enables
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 19
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter 4.1 Status The Status tab shows information of the powerline adapter connected to the current computer where the Management Utility is running. On this page, you can also set its network name.  MAC Address: Displays the
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 20
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter 4.2 Network The Network tab window shows information of all the powerline devices found on the current logical network.  Type: Displays the type of the powerline device found in the network.  Name: Displays the name of the powerline
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 21
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter  Simple Application Mapping: The group allows you to choose what type of traffic with the highest user priority you will use your local HomePlug device
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 22
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter 4.4 System The System tab window is for some basic settings of the adapter. On this tab window, you can upgrade the firmware to the latest version and reset the adapter's settings to the factory defaults. 4.4.1 Upgrade Firmware Click the
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 23
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter If you want to upgrade the version of firmware for the device, please select appropriate GGL file. The GGL file is posted at www.tp-link.com and can be downloaded for free.  Note: The parameter information of GGL will restore to the
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 24
    AV1000 2-port Gigabit Passthrough Powerline Adapter Chapter 5 Advanced Feature: How to Use the Pair Button 5.1 Set Up a Secure Powerline Network The Homeplug AV standard uses 128-bit AES (Advanced Encryption Standard) to safely transmit data between powerline adapters. For the powerline adapters
  • TP-Link AV1000 | TL-PA7020P KIT V1 User Guide - Page 25
    TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter Appendix A: Troubleshooting The Troubleshooting provides answers to common problems regarding the powerline adapter. 1. The Power LED does not light up. Ans. Check the following: 1. Make sure that the powerline adapter is properly
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

TL-PA7020P
AV1000 2-port Gigabit Passthrough Powerline Adapter
REV1.0.0
1910011148