Synology SA3600 Hardware Installation Guide
Synology SA3600 Manual
 |
View all Synology SA3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Synology SA3600 manual content summary:
- Synology SA3600 | Hardware Installation Guide - Page 1
Synology NAS SA3600 Hardware Installation Guide - Synology SA3600 | Hardware Installation Guide - Page 2
Kits 15 Expansion Unit Deployment and Topology 18 Start up Your Synology NAS 19 LED Indicator Table 20 Chapter 3: System Maintenance Replace System Fan 21 Replace Power Supply Unit (PSU) 23 Initial Troubleshooting Guide 23 Chapter 4: Install DSM on Synology NAS Install DSM with Web - Synology SA3600 | Hardware Installation Guide - Page 3
server consisting of both system hardware and the software operating system, DiskStation Manager (DSM). This manual will guide you through all configuration aspects of your SA3600, including the hardware components, setup procedures, system maintenance, and initial troubleshooting instructions - Synology SA3600 | Hardware Installation Guide - Page 4
" status so that DiskStation Manager (DSM) can be reinstalled. 1 For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit. 2 For more information about Synology Expansion Unit supported by your Synology NAS, please visit www - Synology SA3600 | Hardware Installation Guide - Page 5
Hardware Specification Item Compatible Drive Type Maximum Raw Capacity External Device Port LAN Port PCIe Slot Size (H x W x D) (mm) Weight (kg) Supported Client File System Supported RAID Type Agency Certification HDD Hibernation Scheduled Power On/Off Wake on LAN SA3600 3.5"/2.5" SAS/SATA x 12 • - Synology SA3600 | Hardware Installation Guide - Page 6
Name RX1217sas Picture Description 12-bay rackmount type expansion unit, compatible with 3.5"/2.5" SAS/ SATA drives RX2417sas Note: Your Synology NAS supports up to seven expansion units. 24-bay rackmount type expansion unit, compatible with 2.5" SAS/ SATA drives 6 Chapter 1: Before You Start - Synology SA3600 | Hardware Installation Guide - Page 7
• Rail Kit Model Name RKS1317 • Spare Part Model Name Disk Tray (Type R7) FAN 80*80*32_6 PSU 500W-RP Module_2 PSU 500W-RP SET_2 Picture Picture Description Sliding rail solutions Description 3.5"/2.5" drive tray System fan module Redundant PSU module Redundant PSU set (cage x 1, PSU module x 2) 7 - Synology SA3600 | Hardware Installation Guide - Page 8
Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product - Synology SA3600 | Hardware Installation Guide - Page 9
for Component Installation Please prepare below tools and parts before setting up your Synology NAS: • A screwdriver • At least one 3.5" or 2.5" SAS/SATA drive (please visit www.synology.com/compatibility for compatible drive models) Warning: If you install a drive that contains data, the system - Synology SA3600 | Hardware Installation Guide - Page 10
3 Insert the loaded drive tray into the empty drive bay. Note: Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly. 4 Push the handle inward to secure the drive tray. 5 Push the switch on the drive tray handle to the left to lock the drive tray. 6 - Synology SA3600 | Hardware Installation Guide - Page 11
Modules You must install genuine Synology memory module(s) to ensure system compatibility and reliability. Be sure your SA3600. To install the RAM module: 1 Shut down your SA3600. Disconnect all cables connected to your SA3600 to prevent any possible damage. 2 Remove the screw on the back of SA3600. - Synology SA3600 | Hardware Installation Guide - Page 12
3 Insert the new memory module in the slot: a Push the retaining clips on the slot out to the sides. b Align the notch on the gold edge of the module with the notch in the memory slot. c Push down on the memory module with firm and even pressure. The retaining clips will snap into position as the - Synology SA3600 | Hardware Installation Guide - Page 13
out of the slot. 4 Follow step 4 of the To install the RAM module section to put back the top cover. Install PCle Add-in Cards SA3600 provides two PCIe slots for optional add-in card expansion, allowing network interface cards to be installed. To install the network interface cards: 1 Shut down your - Synology SA3600 | Hardware Installation Guide - Page 14
c Align the card's connector with the expansion slot, and insert the card into the slot. Note: Make newly inserted card. 4 Repeat step 3 to install the other network interface card for your SA3600. 5 Put back the rear top cover by following step 4 of the To install the RAM module section. 14 - Synology SA3600 | Hardware Installation Guide - Page 15
example to illustrate how to install or remove the rail kits. For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit. To install the rail kit: 1 To install the rail kit to the rack a Attach the rear end of the - Synology SA3600 | Hardware Installation Guide - Page 16
3 Align the fixing holes of the inner rail to the side of the chassis and slide backward to attach the inner rail. 4 With the help of another person, carefully align the inner rail to the outer rail assembly. 5 Pull and hold the front latch of the inner rail to unlock the inner rail, and push the - Synology SA3600 | Hardware Installation Guide - Page 17
To remove the rail kit: 1 To remove the chassis from the rack, hold the rail kit release tabs on the ear holders and pull out the chassis from the rack. 2 With the help of another person, carefully remove the chassis from the rack. Then, slide forward to remove the inner rail from the chassis. 17 - Synology SA3600 | Hardware Installation Guide - Page 18
and Topology SA3600 supports RX1217sas (12-bay) and RX2417sas (24-bay) expansion units, providing seamless storage expansion whenever needed. This section will guide you through how to connect the expansion units to your Synology NAS. To connect RX1217sas/RX2417sas with SA3600: 1 Connect one - Synology SA3600 | Hardware Installation Guide - Page 19
will automatically power on if they are correctly connected, and the expansion unit ID will be displayed accordingly after a few seconds (if DSM is correctly installed in the Synology NAS server). Start up Your Synology NAS To start up your SA3600: 1 Connect one end of each power cord to the power - Synology SA3600 | Hardware Installation Guide - Page 20
NAS or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology Technical Support - Synology SA3600 | Hardware Installation Guide - Page 21
System Maintenance Replace System Fan If a system fan malfunctions, please see the instructions below to open the case of SA3600 and replace the malfunctioning fan. 1 Press the small buttons located on the sides of the SA3600. Chapter 3 2 Lift to remove the fan cover. 21 - Synology SA3600 | Hardware Installation Guide - Page 22
3 Fans are numbered as indicated below. 4 Find the malfunctioning fan. Lift the fan upward to remove it. 5 Prepare a new fan, and slide it into the SA3600. Make sure the fan is aligned properly as illustrated below. 22 Chapter 3: System Maintenance - Synology SA3600 | Hardware Installation Guide - Page 23
Troubleshooting Guide We have selected several helpful articles on frequently asked questions to help you do initial troubleshooting on your Synology NAS: • General • What can I do to troubleshoot NAS connection problems? • What is the width of my Synology NAS server? • Why does my Synology NAS - Synology SA3600 | Hardware Installation Guide - Page 24
for and find the Synology NAS within the local network. The status of the SA3600 should be Not Installed. 5 Click Connect to start the setup process and follow the onscreen instructions. Note: 1. The Synology NAS must be connected to the Internet to install DSM with Web Assistant. 2. Suggested - Synology SA3600 | Hardware Installation Guide - Page 25
providing any services hosted by Synology NAS server to any third services or other items provided by anyone other than Synology; or (z) your failure to comply with this EULA. Section 10. Support. During the period specified in the Section 9, Synology will make available to you the support services - Synology SA3600 | Hardware Installation Guide - Page 26
and remedies as it may have at law or equity for any actual or threatened breach of any provision of this EULA relating to Synology's intellectual property rights. Section 19. Attorneys' Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this - Synology SA3600 | Hardware Installation Guide - Page 27
been damaged by service (including upgrades and expansions) performed by anyone who is not a representative of Synology or any Synology Authorized Service Provider; (c) (j) Any compatibility issues occurred when installing hardware products, software, or components not supported by Synology. (k) - Synology SA3600 | Hardware Installation Guide - Page 28
Synology, Synology will, at Synology's option: (a) use commercially reasonable efforts to repair the Product, (b) provide technical support www.synology.com/knowledgebase/DSM/tutorial/ Synology may at its own discretion apply the Synology Replacement Service to certain Products, through which Synology - Synology SA3600 | Hardware Installation Guide - Page 29
or any successor thereto does not apply. 5.5 Dispute Resolution. Any dispute, controversy or claim arising out of or relating to this Warranty, the Product or services provided by Synology with respect to the Product or the relationship between Customers residing within the United States and - Synology SA3600 | Hardware Installation Guide - Page 30
FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired - Synology SA3600 | Hardware Installation Guide - Page 31
A VCCI 一 A
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
 |
 |
Synology NAS SA3600
Hardware Installation Guide