Synology RS422 Hardware Installation Guide
Synology RS422 Manual
 |
View all Synology RS422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Synology RS422 manual content summary:
- Synology RS422 | Hardware Installation Guide - Page 1
Synology NAS RS422+ Hardware Installation Guide - Synology RS422 | Hardware Installation Guide - Page 2
of Contents Chapter 1: Before You Start Package Contents 3 Synology RS422+ at a Glance 4 System Modes and LED Indicators 5 Other LED Indicators 7 Hardware Specification 8 Spare Parts 9 Optional Accessories 9 Safety Instructions 10 Chapter 2: Hardware Setup Tools and Parts for - Synology RS422 | Hardware Installation Guide - Page 3
Before You Start Synology NAS RS422+ is an enterprise server consisting of both system hardware and the software operating system, DiskStation Manager (DSM). This manual will guide you through all configuration aspects of your RS422+, including the hardware components, setup procedures, and system - Synology RS422 | Hardware Installation Guide - Page 4
Synology RS422+ at a Glance No. Article Name Location 1 POWERS Indicator 2 Power Button 3 ALERT Synology NAS to "Not Installed" status so that DiskStation Manager (DSM) can be reinstalled. For detailed information on how to reset your Synology NAS, please refer to this article. Supports - Synology RS422 | Hardware Installation Guide - Page 5
run operations in DSM. DSM is not ready for use. This could either be: • Synology NAS is powered on, but DSM is not properly installed. • Synology NAS is currently powering on and initializing services necessary for DSM to fully function. • The attached UPS device has insufficient power; DSM stops - Synology RS422 | Hardware Installation Guide - Page 6
ready > DSM is ready for use • Enter hibernation then wake up from hibernation: DSM is ready for use > Hibernation > DSM is ready for use • Shutdown Synology NAS: DSM is ready for use > Shutting down > Powered off • Power failure with UPS attached: DSM is ready for use > DSM not ready (due to power - Synology RS422 | Hardware Installation Guide - Page 7
NAS or re-insert the drives, then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact Synology Technical Support for help - Synology RS422 | Hardware Installation Guide - Page 8
D) (mm) Weight (kg) Supported Client File System Supported RAID Type Agency Certification HDD Hibernation Scheduled Power On/Off Wake on LAN RS422+ 2.5"/3.5" SATA x 4 USB 3.2 without notice. Please refer to www.synology.com for the latest information. 1 Support for exFAT can be enabled by - Synology RS422 | Hardware Installation Guide - Page 9
(Type R8) 3.5"/2.5" Drive Tray With Lock FAN 40*20_3 System Fan 40*40*20 mm PSU 100W_3 PSU 100W Open Frame Optional Accessories With Synology accessories, you can customize your Synology NAS to fit different business environments without worrying about compatibility and stability. Visit www - Synology RS422 | Hardware Installation Guide - Page 10
Safety Instructions Keep away from direct sunlight and away from chemicals. Ensure a stable environment with no abrupt changes fan. This product must be installed by qualified personnel in a restricted access location (like dedicated equipment rooms, service closets). 10 Chapter 1: Before You Start - Synology RS422 | Hardware Installation Guide - Page 11
kit (please see the Optional Accessories section to find out the suitable rail kit for cabinet installation) Warning: We suggest mounting your Synology NAS on a cabinet before installing any drives since the heavy weight will increase the installation difficulty. Install Rack Mounts 1 Fix the two - Synology RS422 | Hardware Installation Guide - Page 12
2 Install drives: • For 3.5" drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four spots indicated below to secure the drive in place. • For 2.5" drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four - Synology RS422 | Hardware Installation Guide - Page 13
allows you to install network upgrade module for LAN port expansion. To install a network upgrade module 1 Shut down your Synology NAS. Disconnect all cables from your Synology NAS to prevent possible damage. 2 Remove the two screws on the PCIe expansion shield to remove the shield. 3 Insert the - Synology RS422 | Hardware Installation Guide - Page 14
or hub. 2 Connect one end of the AC power cord to the power port of your Synology NAS. Connect the other end to a power outlet. 3 Press the power button to turn on your Synology NAS. Congratulations! Your Synology NAS is now online and detectable from a network computer. 14 Chapter 2: Hardware Setup - Synology RS422 | Hardware Installation Guide - Page 15
. It will search for and find the Synology NAS within the local network. The status of your RS422+ should be Not Installed. RDSS242824221+2R+P+ 5 Click Connect to start the setup process and follow the onscreen instructions. Note: • The Synology NAS must be connected to the Internet to install - Synology RS422 | Hardware Installation Guide - Page 16
from providing any services hosted by Synology NAS server to any services or other items provided by anyone other than Synology; or (z) your failure to comply with this EULA. Section 10. Support. During the period specified in the Section 9, Synology will make available to you the support services - Synology RS422 | Hardware Installation Guide - Page 17
and remedies as it may have at law or equity for any actual or threatened breach of any provision of this EULA relating to Synology's intellectual property rights. Section 19. Attorneys' Fees. In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies under this - Synology RS422 | Hardware Installation Guide - Page 18
SYNOLOGY'S WARRANTY SUPPORTS ARE NOT AVAILABLE IN EVERY COUNTRY, AND THAT SYNOLOGY MAY REFUSE TO PROVIDE THIS LIMITED WARRANTY SUPPORTS TO YOU IF YOU REQUEST SUCH SUPPORTS 2 (a) of the applicable Product registered with EW201/EW202 optional service will be extended by two years. You may see the - Synology RS422 | Hardware Installation Guide - Page 19
the warranty support does not apply to rescue of the data stored in Synology Product or its backup. Customer shall make a backup copy of the stored data before it returns the Product to Synology, Synology may weed up all information or data in the Product while it performs the warranty services and - Synology RS422 | Hardware Installation Guide - Page 20
or any successor thereto does not apply. 5.5 Dispute Resolution. Any dispute, controversy or claim arising out of or relating to this Warranty, the Product or services provided by Synology with respect to the Product or the relationship between Customers residing within the United States and - Synology RS422 | Hardware Installation Guide - Page 21
remain in full force and effect. 5.9 Entire Agreement. This Warranty constitutes the entire agreement, and supersedes any and all prior agreements, between Synology and Customer related to the subject matter hereof. No amendment, modification or waiver of any of the provisions of this Warranty will - Synology RS422 | Hardware Installation Guide - Page 22
FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired - Synology RS422 | Hardware Installation Guide - Page 23
A VCCI 一 A
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
 |
 |
Synology NAS RS422+
Hardware Installation Guide