Sony SRXT105 User Manual (SXRD-operation)
Sony SRXT105 Manual
 |
View all Sony SRXT105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony SRXT105 manual content summary:
- Sony SRXT105 | User Manual (SXRD-operation) - Page 1
4-115-585-11 (2) Data Projector Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. SRX-T110 SRX-T105 © 2008 Sony Corporation - Sony SRXT105 | User Manual (SXRD-operation) - Page 2
if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service - Sony SRXT105 | User Manual (SXRD-operation) - Page 3
via the Ethernet 17 Connecting the Computer via the RS-232C 18 Starting the SRX Controller 18 Starting the SRX Controller 18 Changing the Connection Mode 19 Connecting the Projector 20 Connecting a Computer Equipped with a DVI-D Connector 20 Connecting with a Computer Equipped with an - Sony SRXT105 | User Manual (SXRD-operation) - Page 4
Computer for Controlling the Projector 23 Projecting a 4K Signal in Single-screen Mode 25 Chapter 4 Adjustments and Settings Using the SRX Controller Displaying the Control Lamp Life 34 Maintenance 34 Troubleshooting 35 Error Messages 36 Specifications 38 Index 42 4 Table of Contents - Sony SRXT105 | User Manual (SXRD-operation) - Page 5
AC, 50/60 Hz (SRXT110), or 100 - 240 V AC, 50/60 Hz (SRX-T105). • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by your Sony Have at least four people carry and handle the projector, to avoid accidents or injury. • Avoid - Sony SRXT105 | User Manual (SXRD-operation) - Page 6
liquid crystal display, such "stuck" pixels may appear spontaneously. These problems are not a malfunction. On illumination • To obtain the best about 10 minutes while the STATUS LAMP indicator flashes green. Caution The projector is equipped with ventilation holes (intake) at the front, upper side - Sony SRXT105 | User Manual (SXRD-operation) - Page 7
SRX-T110 and 5,500 lumens for the SRX-T105, assuring excellent uniformity on the entire screen. High resolution Sony's new, unique three SXRD selectable according to the optional input board.) Color space feature The projector supports four standards of color tonal reproduction range, sRGB(ITU-R BT. - Sony SRXT105 | User Manual (SXRD-operation) - Page 8
if it is installed on an uneven surface. e Lens cover f Lens mount part When attaching the optional lens, consult your Sony dealer. g Carrying handle Use to carry the projector. There is another handle on the rear side. h Front/right side ventilation holes (intake) a Cooling unit A cooling fan and - Sony SRXT105 | User Manual (SXRD-operation) - Page 9
. The Password menu can be displayed only when an authorized administrator starts the SRX Controller on the computer for controlling the projector. For details on the SETTING window and the SERVICE window, refer to the Installation Manual for Dealers. Help menu Shows the version information of the - Sony SRXT105 | User Manual (SXRD-operation) - Page 10
. Clicking "STANDBY" opens the confirmation dialog. Clicking "OK" makes the projector enter standby mode. The indicator flashes green. Even in standby mode, the . For details on each window, see "Adjustments and Settings Using the SRX Controller" on page 26. SCREEN CONTROL window 1 23 4 5 a - Sony SRXT105 | User Manual (SXRD-operation) - Page 11
infrared beam between the Remote Commander and the projector. Direct the Remote Commander toward one of the remote control detectors at the in the Control Function Menu window of the SRX Controller. You can recall the data set or adjusted with the SRX Controller. You cannot recall settings registered in - Sony SRXT105 | User Manual (SXRD-operation) - Page 12
Chapter 1 Overview Select the input signal with one of the INPUT SEL A/B/C/ D buttons (5), then select the screen with one of these buttons. Example: When you want to project the signal input from the INPUT B board on Screen 3 (lower left screen), press the INPUT SEL B button, then press the SCREEN - Sony SRXT105 | User Manual (SXRD-operation) - Page 13
blocked. Situation that may block the ventilation holes for exhaust A sudden change of temperature may produce moisture condensation, causing damage to the projector. Take care with heaters or air-conditioners. Very dusty If you put something beside the ventilation holes for exhaust on the side - Sony SRXT105 | User Manual (SXRD-operation) - Page 14
holes (exhaust/intake), see "Location and Function of Controls" on page 8. Using the Adjusters When the projector installation location is not horizontal, rotate the adjusters using a spanner so that the projector is placed horizontally. There are an adjuster on the right and one on the left. 14 - Sony SRXT105 | User Manual (SXRD-operation) - Page 15
"Installation Manual for Dealers". Screen 320 mm (12 5/8 inches) Projection distance Vertical positioning (side view) Install the projector so that with the center of the screen. Screen Center of lens Installing the SRX Controller 1 Insert the supplied installation disc into the CD-ROM drive of - Sony SRXT105 | User Manual (SXRD-operation) - Page 16
2 Preparations After a while, the Welcome page of the SRX Controller appears. When you want to install it in the currently of the destination folder in which to install the SRX Controller appears. 5 Click "Finish". 16 Installing the SRX Controller in a Computer for Controlling the Projector - Sony SRXT105 | User Manual (SXRD-operation) - Page 17
been completed, click to check "Launch SRX Controller for SRX-T series", then click "Finish". The icon is displayed in the desktop window. Connecting a Computer for Controlling the Projector Connect a computer for controlling the projector to the projector via the ETHERNET connector or the RS232C - Sony SRXT105 | User Manual (SXRD-operation) - Page 18
instructions for this port. Note If the power of the projector remains on for a long period of time without the ethernet cable connected, the message "Sony Data Projector computer does not access the projector, start "Windows Firewall" from "Control Panel", and then add "SRX Controller" to the list - Sony SRXT105 | User Manual (SXRD-operation) - Page 19
Mode" on page 19. Help Select "Version" from the "Help" menu to display the version information of the SRX Controller. b Projector detect window Information on all of the projectors connected to a network is displayed. The following information is shown: Alert: Shows whether there is any warning - Sony SRXT105 | User Manual (SXRD-operation) - Page 20
board, consult your Sony dealer. Refer also to the instruction manuals of the equipment Instructions of LKRI005. Notes • According to the input signal type, set "Signal Mode" on "Input Source" in the PICTURE CONTROL window of the SRX board attachment part on the projector, and connect with a computer - Sony SRXT105 | User Manual (SXRD-operation) - Page 21
GBR to HD-SDI output SRW-5000 HD DIGITAL VIDEO CASSETTE RECORDER HDCAM recorder/player, etc. Note When the LKRI-003 is attached to the projector, select the type of signal with "Signal Mode" of "Input Source" in the PICTURE CONTROL window. For Single-link input, select "YPbPr" or "YPbPr FULL - Sony SRXT105 | User Manual (SXRD-operation) - Page 22
the supplied Remote Commander or a computer in which the supplied SRX Controller is installed to project the picture on the screen. Using different input source in each screen. 4 Turn on the equipment connected to the projector. 5 Press the INPUT SEL button to select the input source. A: Selects the - Sony SRXT105 | User Manual (SXRD-operation) - Page 23
" indications do not appear when you select "OSD OFF" in the Control Function Menu window of the computer. Using the Computer for Controlling the Projector 1 STATUS LAMP indicator 3 57 4 To cut off the picture Press the MUTING button. To restore the picture, press the MUTING button again. To - Sony SRXT105 | User Manual (SXRD-operation) - Page 24
standby mode. 2 Start your computer and double-click the icon of the SRX Controller in the desktop window. The Program Launcher screen appears. 3 Select the projector you want to operate by double- clicking the projector. The T100 Controller starts and the Control Function Menu window appears. Note - Sony SRXT105 | User Manual (SXRD-operation) - Page 25
inside of the projector has been cooled down sufficiently and may damage the unit. Projecting a 4K Signal in Singlescreen Mode 4K signals separately input input signal from the optional LKRI-001 may not be able to project a 4K signal as one image. • "PROGRESSIVE DISPLAY MODE" is effective when the - Sony SRXT105 | User Manual (SXRD-operation) - Page 26
the Control Function Menu Window When you install the supplied SRX Controller in a computer, you can operate the picture the SRX Controller in the desktop window of the computer. The Program Launcher screen appears. 2 Select the projector you want to operate by double- clicking the projector. The - Sony SRXT105 | User Manual (SXRD-operation) - Page 27
and Settings Using the SRX Controller Board Shows the input board installed in the relative input board slot of the projector. Input Source Signal is Limited Range compliance. When the 10-bit signal based on Sony's unique specification is input, select "10bit Twin Full" or "10bit Single Full" - Sony SRXT105 | User Manual (SXRD-operation) - Page 28
Chapter 4 Adjustments and Settings Using the SRX Controller compliance, or "10bit Twin Limited" or "10bit Single of 0 to 1023 are converted to the video levels of 0 to 100% to display an image on the projector. In this case, inhibition codes included in a 10-bit HD-SDI signal (data area 0 to 3, and - Sony SRXT105 | User Manual (SXRD-operation) - Page 29
the SRX Controller COLOR board installed in the relative input board slot of the projector. Adobe RGB: Select when projecting Adobe RGB compatible computer source using the Minimum D-Cinema Color Gamut defined by the DCI Specifications Book/Version 1.0. CIE XYZ: Select when projecting an XYZ signal - Sony SRXT105 | User Manual (SXRD-operation) - Page 30
Chapter 4 Adjustments and Settings Using the SRX Controller 6500K: White (0.3127, 0.3290 -preset values. Dot Phase: Adjusts the phase of the SXRD panels and the input signal. Adjust the value to obtain This is not a malfunction of the projector. Adjust the picture position correctly with "Frame - Sony SRXT105 | User Manual (SXRD-operation) - Page 31
SRX 1080 pixels signal as a 4096 (3840) × 2160 pixels 4K image or to project a 1400 × 1050 pixels (SXGA+) is automatically turned on. When you use the projector for a long period of time, click the alternately at the interval of the specified hours. Manual Lamp Select Mode You can specify the lamp - Sony SRXT105 | User Manual (SXRD-operation) - Page 32
Chapter 4 Adjustments and Settings Using the SRX Controller TEST PATTERN Displays a built-in test pattern on the screen for adjusting the picture with no signal input from external equipment. Click the radio - Sony SRXT105 | User Manual (SXRD-operation) - Page 33
window. Signal Adjust Input signal Item Component Video GBR Computer HD-SDI DVI-D 4K Contrast z z z z z z Brightness z z z z z z cannot be set Frame Adjust Input signal Item Component Video GBR Computer HD-SDI DVI-D 4K Dot Phase - - z - - - H Size - - z - - - Sony SRXT105 | User Manual (SXRD-operation) - Page 34
T110: Approx. 800 hours SRX-T105: Approx. 1,000 hours The "Lamp A" and "Lamp B" bar indicators in the Control Function Menu window become red when the time for replacement is coming near. The percentage indicates the time used before the recommended time for replacement. Use them as a guide. Be sure - Sony SRXT105 | User Manual (SXRD-operation) - Page 35
5 Others Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following guide. If the problem still persists, consult your Sony dealer. Power Symptom Power is not turned on. Cause The main power is turned off. The projector and - Sony SRXT105 | User Manual (SXRD-operation) - Page 36
. 10 16V POWER SUPPLY ALERT The projector has failed to supply 16V power. 11 PR-284_1 DETACHED The PR-284 board is not attached correctly on the top row. 12 SXRD PANEL TEMPERATURE The temperature of the panels is too high. ALERT 13 LAMP_A FAN ALERT Trouble with the sirocco fan for Lamp - Sony SRXT105 | User Manual (SXRD-operation) - Page 37
Meaning The internal line of the projector does not function properly. The internal line of the projector does not function properly. The time for replacement. Failure of the lens position adjustment to the registered setting. Trouble with the fan for PS converter, or the harness is disconnected or - Sony SRXT105 | User Manual (SXRD-operation) - Page 38
Chapter 5 Others Specifications Optical characteristics Projection system SXRD (Silicon X-tal Reflective Display) 3 panel prism color integration system SXRD 8,847,360 pixels (4096 × 2160 × 3) Lens Optional Light output SRX-T110: 11,000 lm ± 20% (factory preset value) SRX-T105: 5,500 lm - Sony SRXT105 | User Manual (SXRD-operation) - Page 39
Instructions (SRX-T110/ T105) (1) Operating Instructions (LKRI-005) (1) Operating Instructions (CD-ROM: SRXT110/T105) (1) Installation Manual for Dealers (CDROM) (1) Optional accessories Projection lamp house LKRX-B110 (for SRX-T110) LKRX-B105 (for SRX-T105) Projection lamp LKRX-110 (for SRX-T110 - Sony SRXT105 | User Manual (SXRD-operation) - Page 40
67.50 60.00 74.038 60.00 54.00 48.00 67.50 60.00 Aspect ratio 4:3 16:9 16:9 16:9 16:9 16:9 4:3 16:9 40 Specifications - Sony SRXT105 | User Manual (SXRD-operation) - Page 41
mode Type of signal VIDEO60 VIDEO50 XGA SXGA1 SXGA2 SXGA+ UXGA a) WUXGA a) 720p HD 2K 4K Single screen Horizontal size Vertical size Dual screen Horizontal size Vertical size 2880 2880 2849 2560 2560 2800 a part of the displayed image may be invisible. Chapter 5 Others 41 Specifications - Sony SRXT105 | User Manual (SXRD-operation) - Page 42
the computer for controlling the projector 23 Using the Remote Commander 22 Projecting a 4K Signal in Single-screen Specifications 38 SQUEEZE 31 SRX Controller Installing 15 Program Launcher screen 19 Starting 18 STATUS MESSAGE window 8, 36 Supplied accessories 39 T TEST PATTERN 32 Troubleshooting - Sony SRXT105 | User Manual (SXRD-operation) - Page 43
Sony Corporation
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
 |
 |
4-115-585-
11
(2)
Data Projector
Operating Instructions
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
SRX-T110
SRX-T105
© 2008 Sony Corporation