Sony PCGA-UVC10 Operating Instructions
Sony PCGA-UVC10 Manual
 |
View all Sony PCGA-UVC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony PCGA-UVC10 manual content summary:
- Sony PCGA-UVC10 | Operating Instructions - Page 1
4-668-843-11(1) Visual Communication Camera Operating Instructions PCGA-UVC10 2002 Sony Corporation - Sony PCGA-UVC10 | Operating Instructions - Page 2
product or for the Sony Service Center nearest you, call 1-888-476-6972 in the United States or 1-800-961-7669 in Canada. The number below is for FCC related matters only. Declaration of Conformity Trade Name: SONY Model No.: PCGA-UVC10 Responsible Party: Sony Electronics Inc. Address: 680 - Sony PCGA-UVC10 | Operating Instructions - Page 3
this manual, Microsoft® Windows® XP Home Edition and Microsoft® Windows® XP Professional are referred to as Windows XP. Table of Contents Before Using This Product 4 Introduction 4 Checking the Accessories 5 Names of Parts 6 Setting Up the Camera 7 Installing the driver 7 Using the Camera 11 - Sony PCGA-UVC10 | Operating Instructions - Page 4
Sony VAIO computers with preinstalled Windows 98 SE, Windows 2000, Windows Me, or Windows XP, or VAIO computers that are Windows® XP Ready and have been upgraded using Windows XP upgrade software provided by Sony Corporation (hereafter referred to as "computers upgraded to Windows XP"). The camera - Sony PCGA-UVC10 | Operating Instructions - Page 5
missing, contact the Sony dealer where you purchased this product or a Sony service representative serving your area. • Visual Communication Camera (PCGA-UVC10) • Installation disc (CD-ROM × 1) • Mounting adapter • Adhesive sheet • Visual Communication Camera Operating Instructions (this document - Sony PCGA-UVC10 | Operating Instructions - Page 6
Names of Parts Front Rear CAPTURE button Focus ring Microphone Lense Arm plate Arm 6 GB - Sony PCGA-UVC10 | Operating Instructions - Page 7
your computer and start up Windows, then insert the supplied installation disc into the CD-ROM drive. The installation program starts automatically, and the "Sony Visual Communication Camera PCGA-UVC10 Application Installation Setup" screen appears. 2 Confirm that the software you want to install is - Sony PCGA-UVC10 | Operating Instructions - Page 8
"Device Manager" tab. The "Device Manager" screen appears. 5 Click the plus symbol (+) to the left of "Imaging Device" on the "Device Manager" screen. If the "Sony Visual Communication Camera PCGA-UVC10" screen appears, the driver is properly installed. 8 GB - Sony PCGA-UVC10 | Operating Instructions - Page 9
the plus symbol (+) to the left of "USB Controller". (Depending on the operating system you are using, this may be "Universal Serial Controller") on the "Device Manager" screen. If the "Sony Visual Communication Camera (PCGA-UVC10)" screen appears, the driver is properly installed. 8 After you click - Sony PCGA-UVC10 | Operating Instructions - Page 10
" dialog box appears. Go to Step 4. For operating systems other than Windows XP, click "Start", then align the pointer with "Settings", and select " the "Device Manager" screen. 6 Click "Sony Visual Communication Camera (PCGA-UVC10)" or "??Multiple USB Devices??", and then click "Delete". The " - Sony PCGA-UVC10 | Operating Instructions - Page 11
7). • Do not connect or disconnect the camera's USB cable while Windows is starting up or shutting down. Doing so may cause the camera or your computer to malfunction.• Do not connect or disconnect the camera's USB cable while the software used with the camera is being started or closed. Doing so - Sony PCGA-UVC10 | Operating Instructions - Page 12
or NV Series VAIO computer, use the mounting adapter. Arm plate Arm plate Arm Arm Mounting adapter The camera can be disconnected or connected while the power to your notebook is turned on. For details on the location of your notebook's USB connector, refer to the manuals provided with your - Sony PCGA-UVC10 | Operating Instructions - Page 13
. 2 Connect the camera's USB cable to the USB connector on your desktop computer. The camera can be disconnected or connected while the power to your desktop computer is turned on. For details on the location of your desktop computer's USB connector, refer to the manuals provided with your desktop - Sony PCGA-UVC10 | Operating Instructions - Page 14
both the tripod handle and the camera with your hands. • When adjusting the camera angle, focus, or positioning of the USB cable, make sure you support the camera with your hand. • When operating the capture button on the camera, make sure you support the camera with your hand. • Make sure you - Sony PCGA-UVC10 | Operating Instructions - Page 15
is in energy saving mode and then connect it again, the camera may not be recognized. 1 Close the software used by the camera. 2 Disconnect the USB cable, and then disconnect the camera. Notes • If you pull on the cable itself when disconnecting the USB cable, you may damage the cable. Make sure you - Sony PCGA-UVC10 | Operating Instructions - Page 16
can hold it in your hand as shown in the illustration to capture images from a variety of angles. z Hint If you want to use the camera while holding it by hand, we recommend that you cancel the Network Smart Capture mirror display function. Note Check that the Network Smart Capture mirror - Sony PCGA-UVC10 | Operating Instructions - Page 17
3 Select "Sony PCGA-UVC10" in the Mixer device text box, and click "OK". The "Capture" screen appears. z Hint If the "Capture" screen does not appear, the driver may not be . Make a video or audio recording using your software. If the audio plays back correctly, the settings are complete. 17 GB - Sony PCGA-UVC10 | Operating Instructions - Page 18
Do not point the lens at the sun. This could cause burn-in or other lens damage. Be careful when leaving the camera next to a window or outdoors. Operation • Do not remove the camera's USB cable during operation. Doing so may cause the camera to malfunction. • Do not place any objects on top of the - Sony PCGA-UVC10 | Operating Instructions - Page 19
get help and support from Sony, and on troubleshooting tips for your DVD-RW drive. About Sony's support options Sony provides several support options for your Visual Communication camera. When you have questions about your camera or the software, refer to the following: ❑ This guide explains how to - Sony PCGA-UVC10 | Operating Instructions - Page 20
20% at 140°F (60°C) (hygrometer reading of less than 95°F (35°C)) Accessories PCGA-UVC10 Installation Disc (CD-ROM × 1) Mounting adapter (1) Adhesive sheet (1) Visual Communication Camera Operating Instructions (1) Warranty (1) The specifications or external appearance of this product are subject to - Sony PCGA-UVC10 | Operating Instructions - Page 21
finder Still images and movie images downloaded from the camera appear grainy on the display. Cause/Remedy • The USB cable is not connected properly. c Close the currently open software, and reconnect the cable. • The driver is not installed. c Check whether the driver is installed, and if the - Sony PCGA-UVC10 | Operating Instructions - Page 22
is performed. • When the CPU load is too heavy. • When using a Sony notebook with an internal camera, and you press CAPTURE on your computer. • Multiple software applications are running concurrently. c Close one of the software applications. • Depending on the screen mode and number of colors your - Sony PCGA-UVC10 | Operating Instructions - Page 23
.) Images downloaded from the camera appear white. Cause/Remedy Close all software applications currently in use and restart your computer. If you cannot restart your computer, refer to the manuals provided with your computer, and turn off the power. Your computer enters energy saving mode - Sony PCGA-UVC10 | Operating Instructions - Page 24
Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Printed in Japan
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
4-668-843-
11
(1)
2002 Sony Corporation
Visual Communication
Camera
PCGA-UVC10
Operating Instructions