Sony BRCH900 Specification Sheet (CCFC-S200 & BRU-SF10 Specification)
Sony BRCH900 Manual
View all Sony BRCH900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony BRCH900 manual content summary:
- Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 1
via a single cable. Video, sync, pan/tilt control, camera control signal and audio line-in signal can be transmitted using with the CCFC-S200, single mode optical fiber cable and the BRBK-SF1, HD optical multiplex card. The distance between the BRU-SF10 and the BRC-Z330/-H900 can be extended to - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 2
-SF10 at the same time. 6. External sync signal input/output equipped When multiple BRC-Z330 or BRC-H900 HD cameras or combination of BRC-Z330 and BRC-H900 HD cameras are connected via the Optical Fiber Cable, the video signal can be synchronized by inputting the sync signal into the external sync - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 3
card The BRBK-HSD2 provides HD-SDI signal when installed into the BRU-SF10 built-in card slot. By turning off data mix, it enables various camera settings without displaying OSD on video out signal (main line). This can be used as an optional card for the BRC-Z330*/-H900. Note 1: Although the BRBK - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 4
BRBK-HD2 for the BRC-Z330/-H900 can not be used with the BRU-SF10. Pin Assignment and Connection BRU-SF10 VISCA RS-232C IN pin assignment 8 7 6 5 43 2 1 Pin No. 1 2 3 4 5 6 7 8 Name DTR DSR TXD GND RXD GND N.C. N.C. Signals Data Transmission Ready (INPUT) Data Set Ready (INPUT) Transmit Data - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 5
D-Sub 15P pin assignment Pin Functions No. When setting YPbPr When setting When setting RGB at COMPONENT COMPONENT SYNC at VD When setting RGB at VD 1 Pr-OUT Pr-OUT R-OUT GND GND GND GND 12 NC NC NC NC 13 HD-OUT HD-OUT HD-OUT HD-OUT 14 3 Value SYNC-OUT 2 Value VD-OUT 3 Value SYNC- - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 6
Brochure specifications Optical fiber Video output External sync input External sync output Audio line output Camera control RS-232C connecting cable (3 m, Mini DIN 8 pin) (1), Operating instructions (1) BRU-SF10 Additional specifications Selectable external sync External Sync. Lock capability - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 7
Mass Supplied accessories BRBK-HSD2 Video output Power supply Power consumption 16 × 3 inches) (not including the projected parts) Approx. 125g (4.4 oz) Operating instructions (1) BNC x3, HD-SDI or SD-SDI 12 V DC (supplied from the camera or the Optical Multiplex Unit) 2.9 W max. 0 °C to 40 °C (32 °F - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 8
CCFC-S200 Type Length Weight Supplied accessories Approx. 130 g (4.6 oz) Operating instructions (1) LC duplex optical fiber cable 200m (656feet) Approx. 3.6kg (7lb 15oz : UL60950-1/CSA C22.2 No.60950-1 FCC/IC: Digital Device Class A Laser: DHHS/DNHW North America North America North America FCC/IC - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 9
External appearance BRU-SF10 - 9 - - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 10
Rear Panel External Sync IN / OUT VISCA RS-232C IN / OUT HD Optical Fiber IN VIDEO OUT D-SUB 15P Option I/F card slots VISCA RS-422 IN / OUT AUDIO OUT DIP SW (10BIT) DC 12 V - 10 - - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 11
BRBK-SA1 - 11 - - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 12
BRBK-HSD2 - 12 - - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 13
BRBK-SF1 - 13 - - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 14
Chart1 Model name BRU-SF10 BRU-H700 BRU-300/P Appearance Fiber cable Max. extension 2,000m (CCFC-S200) 1,000m (CCFC-M100HG) 500m (CCFC-M100) Video output Analog RGB, Y/Pb/Pr Analog RGB, Y/Pb/Pr VBS, Y/C RS-232C / RS-422 Sync system Power requirements Power consumption Dimensions (WxHxD - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 15
CCFC-S200 Specification 1. General information This specification covers the descriptions of the optical fiber cable with connector. The following describes the structure and the characteristics of it. 2. Product Name Nonflammable SM type optical fiber cable with duplex LC connector plug on both - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 16
6. Structure 6.1 Optical fiber cord Item Fiber type Mode field diameter Cladding diameter Concentricity error Cladding noncircular ratio Interception wavelength Fiber curl radius Proof level Material Diameter Reinforcement Jacketing Material Color Diameter (approx.) Unit - um um um % um m % - um - - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 17
Not to scale Fiber core Reinforcement Jacketing Not to scale Optical fiber cord Strength member Sheath *Identification of optical fiber cord shall be made by sequential number printed on the jacketing (numbering). 6.3 Optical Connector Connector type Duplex LC connector plug Specification IEC - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 18
Attenuation lambda=1.31um Zero - dispersion wavelength Zero - dispersion slope Characteristics Less than 0.40dB/km 1.300~1.324um Conversion L Conversion formula 0.2= - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 19
9. Flame retardant characteristics 9.1 Optical fiber cable Item Characteristics Flame retardant test Approved UL1581 VW-1 10. Package The cable is winded up in a coil and the connector part should be protected from damage while transportation - 19 - - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 20
Duplex LC Connector Plug Shrinkage Tube (blue) Flexible Tube Shrinkage Tube (blue) Label (white) Refer to the Note Flame Retardent Fiber Cable Duplex LC Connector Plug Shrinkage Tube (blue) Flexible Tube Shrinkage Tube (blue) - 20 - Note: The following items should be on the label Product name - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 21
Duplex LC Connector Plug Shrinkage Tube (blue) Spacer (should not be spread) Flexible Tube Flame Retardent Fiber Cable - 21 - Nonflammable optical fiber cable with duplex LC connector plugs on both sides - Sony BRCH900 | Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 22
- 22 - Duplex LC Connector
- 1 -
As of May 8, 2012
BRU-SF10
1.
Single mode fiber cable supported
The BRU-SF10 supports single mode optical fiber cable ensuring 2,000m transmission at maximum.
2.
Status display on the front panel
The following various status displays are newly added on the front panel of the BRU-SF10 to increase its usability.
- 1080i/720p, 59.94/50, RS-232C/422, 9600/38400bps
- Camera ID : 1~7
3.
Monitor output
By inserting the BRBK-HSD2, the HD/SD-SDI output card into optional card slot, the BRU-SF10 enables monitor
output. By terming off data mix, it enables various camera settings without displaying OSD on video out signal (main
line).
4.
Uncompressed digital transmission
The BRU-SF10 features uncompressed multiple signal operation via a single cable. Video, sync, pan/tilt control,
camera control signal and audio line-in signal can be transmitted using with the CCFC-S200, single mode optical fiber
cable and the BRBK-SF1, HD optical multiplex card. The distance between the BRU-SF10 and the BRC-Z330/-H900
can be extended to a maximum 2,000m (6,560 feet). The Single cable operation makes it possible to integrate the
camera system easily.
5.
Variety of video signal output
The BRU-SF10 is equipped with analog RGB or Y/Pb/Pr signal output as standard. Furthermore, 2 built-in optional