Sony BRCH900 Product Manual (BRC-H900 command manual)
Sony BRCH900 Manual
 |
View all Sony BRCH900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony BRCH900 manual content summary:
- Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 1
A-E99-100-11 (1) HD Color Video Camera Command List Version 1.00 BRC-H900 © 2012 Sony Corporation - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 2
Setting Command 6 VISCA Command/ACK Protocol 7 VISCA Camera-Issued Messages 8 BRC-H900 Commands 9 BRC-H900 Command List (1/5 9 BRC-H900 Command List (2/5 10 BRC-H900 Command List (3/5 11 BRC-H900 Command List (4/5 12 BRC-H900 Command List (5/5 13 BRC-H900 Inquiry Command List (1/3 14 BRC - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 3
Flow control using XON/XOFF and RTS/CTS, etc., is not supported. set the camera address selectors on the connected BRC-H900 cameras to different numbers. Note In the same network, all the camera address selectors should be set to "0" (automatic setting) or all the selectors should be manually set - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 4
list, as the header is 8X, input the address of the BRCH900 to X. The header of the reply packet from the BRC-H900 assigned address 1 is 90H. The packet from the BRC-H900 assigned address 2 is A0H. Some of the setting commands for BRC-H900 can be sent to all devices at one time (broadcast). In - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 5
for inquiring about the current state of the BRCH900. Command Packet Note Inquiry 8X QQ RR ... FF QQ1) = Command/Inquiry, RR2) = category code 1) QQ = 01 (Command), 09 (Inquiry) 2) RR = 00 (Interface), 04 (camera 1), 06 (Pan/Tilter) X = 1 to 7: BRC-H900 address For actual values to be sent, see - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 6
Sent from the peripheral device to the controller when a device is removed from or added to the network. The address must be re-set when this message is received. Packet Address 88 30 01 FF Network Change X0 38 FF X = 9 to F: BRC-H900 address + 8 Note Always broadcasted. VISCA interface - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 7
(Example) 90 60 02 FF (Syntax Error) Accepted a command which is not supported or a command lacking parameters. 81 01 04 38 02 FF (Example) 90 60 completed or when the socket number specified is wrong. * When the camera address selector is set to an address other than 0, the value x in 88 30 0x - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 8
VISCA Camera-Issued Messages ACK/Completion Messages Command Command Message ACK Completion z0 4y FF (y: cannot be executed due to current conditions. For example, when a command for controlling the manual focus is received during the auto focus mode. Network Change Message Command Command - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 9
BRC-H900 Commands BRC-H900 Command List (1/5) Command Set EXPOSURE MODE IRIS Command FULL AUTO MANUAL SHUTTER Pri IRIS Pri BACK LIGHT SPOT LIGHT Reset Up (OPEN) Down (CLOSE) Direct SHUTTER Reset GAIN AE SPEED AE LEVEL AGC AGC LIMIT AGC - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 10
BRC-H900 Command List (2/5) Command Set Command COLOR WHITE - BALANCE One Push WB Trigger R.GAIN Reset Up Down Direct B.GAIN 04 35 0p FF 8x 01 04 10 05 FF Comments p 0: AUTO 1: INDOOR 2: OUTDOOR 3: ONE PUSH 5: MANUAL 8x 01 04 03 00 FF 8x 01 04 03 02 FF 8x 01 04 03 03 FF 8x 01 04 43 00 - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 11
BRC-H900 Command List (3/5) Command Set Command COLOR DETAIL COLOR 01 04 38 10 FF p 2: ON 3: OFF 0: 50Hz 1: 60Hz p 2: Auto 3: Manual 8x 01 04 18 01 FF 8x 01 04 18 02 FF 8x 01 06 07 00 18 0p FF p: 2 ON 3: OFF 8x 01 7E 01 2C 0p FF p: 0 HD 3: SD 8x 01 7E 01 3E 00 02 FF 8x 01 7E 01 3E 00 03 - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 12
BRC-H900 Command List (4/5) Command Set Command VIDEO OUT D-SUB 15 - FORMAT ADD - SYNC(RGB) SYNC TYPE - IMG Stop - ABS (Absolute Position) REL (Relative Position) Home - Reset - CAMERA ID - - Setting TITLE Display Title Set1 - (Preset Position) Title Set2 - Title Set3 - - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 13
BRC-H900 Command List (5/5) Command Set Command TITLE Display Title Set1 - (Standard) Title Set2 - Title Set3 - Title Clear - Title On - Title Off - MENU Display - - OFF PRESET Set - Reset - Recall - Zoom Stop - Tele (Standard Speed) Wide (Standard Speed) Tele ( - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 14
BRC-H900 Inquiry Command List (1/3) Inquiry Command EXPOSURE MODE FULL AUTO IRIS Pri SHUTTER Pri MANUAL Inquiry BACK LIGHT ON/ OFF Inquiry SPOT FF pq: See the VISCA Command Setting Values (IRIS) section y0 50 00 00 0p 0q FF pq: See the VISCA Command Setting Values (SHUTTER) section y0 50 00 - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 15
BRC-H900 Inquiry Command List (2/3) DETAIL COLOR DETAIL KNEE GAMMA Inquiry 50 0p FF p 2: ON 3: OFF p 0: 50Hz 1: 60Hz p 2: Auto 3: Manual p: 2 MODE1 3 MODE2 8x 09 06 08 FF 8x 09 04 66 FF 8x 09 2 ON 3: OFF 8x 09 7E 01 2C FF y0 50 0p FF p: 0 HD 3: SD 8x 09 7E 01 3E FF y0 50 00 0p 0q 0r FF pqr: - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 16
BRC-H900 Inquiry Command List (3/3) VIDEO OUT BRBKSA1 Inquiry Command D-SUB 15 - FORMAT ADD - SYNC(RGB) SYNC TYPE - IMG SIZE - SETUP - D-SUB 9Pin OUT1 D-SUB 9Pin OUT2 RGB SYNC - IMG SIZE - SETUP - BRBK- IMG SIZE - HSD2 POWER ON/OFF - Status Inquiry CAMERA Command Setting - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 17
BRC-H900 Block Inquiry Command List Lens control system inquiry commands.....Command Packet 8x 09 7E 7E 00 FF Byte Bit 7 6 5 4 0 3 2 1 0 7 6 5 4 1 3 2 1 0 0 0 0 0 0 0 0 0 Focus Mode (1: Auto 0: Manual) 0 0 0 0 0 Camera Memory Recall (1: Executing 0: Stopped) Focus Command (1: Executing 0: Stopped) - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 18
Camera control system inquiry commands (1/2).....Command Packet 8x 09 7E 7E 01 FF Byte Bit 7 6 5 4 0 3 2 1 0 7 6 5 4 1 3 2 1 0 7 6 5 4 2 3 2 1 0 7 6 5 4 3 3 2 1 0 7 6 Outdoor 3: Onepush 5: Manual) 0 0 0 0 0 0 0 DETAIL SETTING (0: Off 1: On) 0 0 0 0 EXPOSURE MODE (0: Auto 1: Manual A: Shutter Pri B: - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 19
Camera control system inquiry commands (2/2).....Command Packet 8x 09 7E 7E 02 FF Byte Bit Comments 7 6 Destination Address 5 4 0 3 2 2 1080/720 mode (1: 1080 0: 720) 1 59.94/50 mode (1: 59.94 0: 50) 0 Camera status (1: Power On 0: Sleep) 7 0 6 0 5 0 4 0 3 3 2 COLOR OFFSET - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 20
Byte Bit Comments 7 0 6 0 5 0 4 0 6 3 2 G-B (H) 1 0 7 0 6 0 5 0 4 0 7 3 2 G-B (L) 1 0 7 0 6 0 5 0 4 0 8 3 2 B-R (H) 1 0 7 0 6 0 5 0 4 0 9 3 2 B-R (L) 1 0 7 0 6 Camera block FAN rotating status (1: Rotating 0: Stop) 5 COLOR DETAIL (1: On 10 - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 21
Other enlargement inquiry commands (2/5 Command Packet 8x 09 7E 7E 04 FF Byte Bit 7 6 5 4 0 3 2 1 0 7 6 5 4 1 3 2 1 0 7 6 5 4 2 3 2 1 0 7 6 5 4 3 3 2 1 0 7 6 5 4 4 3 2 1 0 7 6 5 4 5 3 2 1 0 Comments Destination Address Source Address 0 1 0 1 0 0 0 0 0 0 0 0 Current R GAIN (H) 0 0 0 0 Current R - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 22
Other enlargement inquiry commands (3/5 Command Packet 8x 09 7E 7E 05 FF Byte Bit Comments 7 6 Destination Address 5 4 0 3 2 Source Address 1 0 7 0 6 1 5 0 4 1 1 3 0 2 0 1 0 0 0 7 0 6 0 5 V DETAIL CREATION 4 0 - 3 2 3 2 DETAIL CRISPENING 1 (H) 0 7 0 6 0 5 - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 23
Other enlargement inquiry commands (4/5 Command Packet 8x 09 7E 7E 06 FF Byte Bit 7 6 5 4 0 3 2 1 0 7 6 5 4 1 3 2 1 0 7 6 5 4 2 3 2 1 0 7 6 5 4 3 3 2 1 0 7 6 5 4 4 3 2 1 0 7 6 5 4 5 3 2 1 0 Comments Destination Address Source Address 0 1 0 1 0 0 0 0 0 0 0 COLOR DETAIL PHASE (H) 0 0 0 0 COLOR - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 24
Other enlargement inquiry commands (5/5 Command Packet 8x 09 7E 7E 07 FF Byte Bit Comments 7 6 Destination Address 5 4 0 3 2 Source Address 1 0 7 0 6 1 5 0 4 1 1 3 0 2 0 1 0 0 0 7 0 6 0 5 0 4 2 3 2 BLACK LEVEL (H) 1 0 7 0 6 0 5 0 4 0 3 3 2 BLACK LEVEL - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 25
1/8000 0 E 1/4000 0 D 1/2000 0 C 1/1000 0 B 1/500 0 A 1/250 0 9 1/125 0 8 1/120 0 7 1/100 0 6 1/60* * The setting is 1/60 when the video format is set to 1080/59.94i or 720/ 59.94p. The setting is 1/50 when the video format is set to 1080/50i or 720/50p. GAIN Parameter - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 26
Pan/Tilt Position (for reference) Pan Angle (degrees) 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 169 Left Yp Yq Yr Ys Yt 00000 00938 01270 01BA8 024E0 02E18 03750 04088 049C0 052F8 05C30 06568 06EA0 077D8 08110 08A48 09380 09BDE Right Yp Yq Yr Ys Yt 00000 FF6C8 FED90 FE458 FDB20 - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 27
Pan/Tilt Status Code List P 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - 0 - 0 0 0 - 0 1 0 - 1 0 0 - 1 1 Q 0 0 - - 1 0 0 1 - - 1 0 R 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - - - 0 0 - - 1 0 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - 0 - - - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 28
last operated last operated Comments - 00 While no Recall commands are used after the power has been tuned on 1 7F ≠00 (or =00 for Reset, Set and Recall commands) 2 01 3 02 4 03 5 04 6 05 7 06 8 07 9 08 10 09 11 0A 12 0B 13 0C 14 0D 15 0E 16 0F - Sony BRCH900 | Product Manual (BRC-H900 command manual) - Page 29
Revision History Version 1.00 Item Description New edition 29
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
HD Color Video Camera
Command List
Version 1.00
BRC-H900
A-E99-100-
11
(1)
© 2012 Sony Corporation