Smeg CPF30UGMX Instruction Manual 3
Smeg CPF30UGMX Manual
 |
View all Smeg CPF30UGMX manuals
Add to My Manuals
Save this manual to your list of manuals |
Smeg CPF30UGMX manual content summary:
- Smeg CPF30UGMX | Instruction Manual 3 - Page 1
by a qualified installer, service company or gas supplier. READ AND SAVE THESE INSTRUCTIONS - Your safety and the safety of others are very important. We have provided many important safety messages throughout this manual and on the appliance. Read all the instructions before using the appliance - Smeg CPF30UGMX | Instruction Manual 3 - Page 2
. WARNING: For your safety, the instructions contained in this manual must be followed to minimize the risk of fire or explosion and to prevent property damage, personal injury or loss of life. • This conversion kit must be installed by a qualified service agency in accordance with the manufacturer - Smeg CPF30UGMX | Instruction Manual 3 - Page 3
EN Conversion Kit 1 List of components This conversion kit consists of the following components: • One warning label change injectors • One label for LPG injectors • One seal gasket 12.5x18.5x2 (mm). • One injector Ø 0.60 mm for the Auxiliary burners. • One injector Ø 0.80 mm for the Semi- - Smeg CPF30UGMX | Instruction Manual 3 - Page 4
manifold pressure in order to check the regulator. The range must be isolated from the gas supply piping system by turning off the respective manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or greater than 1/2 PSIG (3.5 kPa). 4 Replacing - Smeg CPF30UGMX | Instruction Manual 3 - Page 5
Make sure that the holes of the flame-spreader crowns are aligned with the thermocouples (3) and igniters (4). 5 Test the appliance Follow these instructions to leak test the appliance: Use a brush and liquid detergent to test all gas connections for leaks. Bubbles around connections indicate a leak - Smeg CPF30UGMX | Instruction Manual 3 - Page 6
1600 5200 800 4200 By-pass (mm) 0.33 0.39 0.70 0.30 0.63 NOTE: Save the nozzles that were removed from the appliance along with these instructions for possible future use. WARNING FIRE HAZARD Use a soapy solution to check that it is leak-tight. Never test for gas leaks with a match or - Smeg CPF30UGMX | Instruction Manual 3 - Page 7
EN Conversion Kit 8 Combustion products The combustion products may be extracted by means of hoods connected to a natural draught chimney whose efficiency is certain or via forced extraction. An efficient extraction system requires precision planning by a specialist qualified in this area and must - Smeg CPF30UGMX | Instruction Manual 3 - Page 8
grease. Lubrication of the gas taps should be performed by a specialized technician. • Save the nozzles removed from the unit along with these instructions for possible future use. • For installation of the appliance at high altitude, please consult your local gas company for their recommendation on
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Important Safety Instructions
3
EN
IMPORTANT SAFETY INSTRUCTIONS
WARNING
: If the instructions contained in this manual are not followed
precisely, fire or explosion may result causing property damage, personal
injury or loss of life.
•
Do not store or use gasoline or other flammable vapors or liquids near
this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
•
Do not try to light any appliance.
•
Do not touch any electrical switches.
•
Do not use any telephones in your building.
•
Immediately call your gas supplier from a neighbor’s phone. Follow the
gas supplier’s instructions.
•
If you cannot reach your gas supplier, call the fire department.
•
Installation and service must be performed by a qualified installer,
service company or gas supplier.
READ AND SAVE THESE INSTRUCTIONS
- Your safety and the safety of
others are very important.
We have provided many important safety messages throughout this manual and
on the appliance.
Read all the instructions before using the appliance and always obey all safety
messages.
RECOGNIZE SAFETY INFORMATION
This is a safety alert symbol. This symbol alerts you to potential hazards that can
result in severe personal injury or loss of life.
UNDERSTAND SIGNAL WORDS
A signal word - DANGER, WARNING or CAUTION - is used with the safety alert
symbol. DANGER denotes the most serious hazards. It means you could lose your
life or be seriously injured if you do not
immediately follow the instructions.
WARNING means you could lose your life or be seriously injured if the instructions
are not followed. CAUTION indicates a potentially hazardous situation which, if
not avoided, could result in minor to moderate injury.