Sennheiser e 845 Product Sheet
Sennheiser e 845 Manual
 |
View all Sennheiser e 845 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser e 845 manual content summary:
- Sennheiser e 845 | Product Sheet - Page 1
Weight without cable shall be 330 grams (11.64 oz). The microphone shall be the Sennheiser e 845, the variant with a silent ON/OFF switch shall be the Sennheiser e 845 S. TECHNICAL DATA Transducer principle (Microphone dynamic Pick-up pattern super-cardioid Frequency response (microphone 40 -16 - Sennheiser e 845 | Product Sheet - Page 2
DIMENSIONS POLAR PATTERN 11/12 Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com. Copyright © 11/2012. All rights reserved. Errors and omissions excepted. FREQUENCY RESPONSE PRODUCT VARIANTS e 845 S - High Performance Lead Vocal Microphone with
-
1 -
2
 |
 |
FEATURES
Rugged all metal body
±
Exceptional feedback rejection
±
Full dynamic range and smooth frequency
±
response for excellent signal quality
Consistent on-/off-axis and proximity
±
response
Very good rejection of handling noise
±
Hum compensating coil
±
ARCHITECT
’
S
SPECIFICATIONS
The high-performance lead vocal micro-
phone shall be a dynamic super-cardioid
type designed for rough stage use. The
microphone shall have a rugged metal body
and a shock-mounted capsule and shall
include a hum compensating coil.
T
he frequency response shall be 40 Hz –
16,000 Hz and the sensitivity (free field,
no load) shall be 1.8 mV/Pa at 1 kHz. The
nominal impedance shall be 350
O
, with a
min. terminating impedance of 1 k
O
.
The microphone shall provide a 3-pin XLR
connector. Dimensions shall be 46 x 185 mm
(1.81“ x 7.28“). Weight without cable shall
be 330 grams (11.64 oz). The microphone
shall be the Sennheiser e 845, the variant
with a silent ON/OFF switch shall be the
Sennheiser e 845 S.
Extended high frequency response and super-cardioid pick-up pattern for
higher signal output, cuts through high on-stage sound levels. Smooth warm
tonal response and full dynamic range, with presence lift for vocal clarity and
projection. Consistent on/off axis and proximity response maintain sound
quality while moving, providing greater on-
stage freedom.
Full metal construction and extensive
suspension and shock-mounting minimize
handling noise and signal interference. High
output performance microphone, offering
power, clarity and projection (also available
with a switch: e 845-S).
TECHNICAL DATA
Transducer principle (Microphone)
.....................
dynamic
Pick-up pattern
........................................................
super-cardioid
Frequency response (microphone)
.....................
40 –16,000 Hz
Sensitivity (free field, no load at 1 kHz)
...........
1.8 mV/Pa
Nominal impedance
................................................
350
O
Min. terminating impedance
................................
1000
O
Connector
..................................................................
XLR-3
Dimensions
...............................................................
d 46 x 185 mm
Weight w/o cable
....................................................
330 g
DELIVERY INCLUDES
1 e 845
1 microphone clip
1 pouch
Instructions for use
e 845
High-performance lead vocal microphone designed for rough stage use